Megalomaniac

I'm going to guess different configurations for different roles?

The hop-up chamber has nothing to do with the firing stop.

What NOD mount is that? As far as Boogies go, make a cut under each eye at the lowest point to keep sweat from pooling, and make 4 equal distance cuts across the top to vent.

Either URX is a pain to deal with if you don't have the URX barrel nut wrench

How are the ignitors over the standard shaded? I have then in both clear and shaded already and love them, a few cuts in the foam and no fog.

If you want a small FET, a few guys over on Airsoft-Mechanics make UBER small FETs, I just picked one up by a guy called Jonezy (http://www.facebook.com/jonezyscustoms) it is the size of a set of Deans connectors, it should fit just about anywhere.

How much larger are the pins?

Bolt Lock, no blowback.

Do you have any way to check the receiver threading is it AEG or RS?

You only need the need debounce if you intend on running an active braking MOSFET, if you read E-Fs white paper on the UCM and De-Bounce he mentions as lighter structure low voltage switch had less bounce but requires the use of a MOSFET.

Swap the spring, you can find a wide range of clone PTW type springs.

Keep us posted, I had a CTW that was brilliant for a few hundreds rounds, the it failed, then I fixed it put a few hundred more through it also brilliant, sold it and in a week it blew apart, I fixed it again and it failed several times more.

I started thinking about putting one in the battery pack itself and running a simple three wire FET. I guess I'll keep the CQB-R stock for now and not re-wire the SOCOM.

Two questions, what parts do I need to convert a SOCOM to a CQBR/SOPMOD rear wired setup? And for those running wires in the rear where have you tucked or hidden your MOSFETs?

Link? Context? Proof?

Same, I just grabbed a CQB-R and started saving for that damned 416.

Or drill out and helicoil the flash hider to 14mm x 1.0 or what ever your barrel thread is.

Pictures of myself and TF495 at Operation Blacksheep @ The Cove, despite the smaller than expected turnout the AO was still massive for this OP, and to give massive respect to the other teams and players who stuck out that cold pitch dark night and kept operating. If you are looking for a game that will challenge you physically and mentally come to this game next year, the terrain and climate (almost 80f during the day and down to almost 40f or lower at night) were just as much of a fight as the opposition, we hit the wall hard several times and made it through it and kick enough *albatross* t

My kit may be lighter, but you have more mags in one side of the BOAR than I do in total.

Kitted up for OP:BS @ The Cove,

Can't believe no-one brought up differential zeroing, have the optic dialed for say 50ft and the irons for 100ft, if your range estimation is good you can get accurate hold overs with good reference points at a wide range, been doing this for ages and it works great.

Anyone know the details of doing it? VFC SR635 uppers can be had for cheapish these days.....

Support for LI-Po monitoring would be nice, but sign me up for atleast 2.

I run an EMDOM-MM CM Duty Belt in small and it fits me at a 27" waist.

Far left mask in the first picture coming out of the dark at you = nightmare fuel.