AirSoftNJ

Shooter you were running a metal bolt correct?

AATV Reviewed these also and said the lenses were blurry and non-conventional for shooting. Why dont you try some arena flakjaks for half the price

^^ CREDIT TO PANTERA TIGRIS HERE http://www.youtube.com/watch?v=4ozJs1tLMow&feature=player_embedded

http://www.kwausa.com/forums/index.php?showtopic=2211 Enjoy!

Why dont you Just get a Cheap ACM one and Mess Around with it to Attempt to Make it fit or use it for Parts, there like 30 USD

Well for a Jap you need the ReadyFighter Nozzle. It requires no modification, unlike the TW and KWA

^ I experience A Lot of Hooking with .28's Every 2 Out of 5 Shots Now, which is weird since everytime prior was like a Frozen Rope!

I carry My MP7 as a Woodland Primary with a Eotech 553 EDGi Barrel and 6 Mags, 3 On Each Panel on a Drop Leg Molle. The Gun Is Light and The Mags arent That Bad. But I say Back Up

Update Fired My Gun in 45 Degree Weather, Gun Fired All BB's But didn't Lock back Bolt. Too Weak of BB. Further in to the Game only would fire 10 BB's on Full and Then I would need to Re Cock the Gun. The Mags had a 7 Second Burst of Propane and My Gun only Fired 375 Today. 30 Degrees Dropped my FPS DRASTICALLY:o

Mine is the Taiwan Version the Original Version RA Tech Featured Last Year. I was Achieving this at about 80 Feet or So. Which is damn Surprising considering the Weight of the BB! The Farthest BB from Center to Be Exact was 2 3/4. I was Using a Fidarigon BB Chronoer from TMC and the Ami-bent Temp was from 65-70 Far. Using Straight Propane No Silicone, THIS is JUST FOR TESTING. Dont Rage me for Not Using it. It keeps the Consistency each shot equal. Also I must add Barrel is 220 6.00 and Has been Cleaned with Rubbing Alcohol and No Silicone so I dont have to Break in the Barrel. I must add toda

Greg, My Taiwan with 220 6.00 Barrel Hits Around the 440's with .28's. My Accuracy is within 2 Inches of the Center Every time. I am Using a SANDED Tip of the RF Nozzle. Upgraded Recoil and Rocket Valve Spring and SD valve Yes Look back in the Pages 34 On I know Panthera Posted up a Picture of the KSC Breakdown Guide included in the Manual ALSO On SIDE NOTE ReadyFighter Adapter Does NOT fit with the EDGI Barrel the Inner Diameter of the 14mm is to Small. TO Correct this. Take a 1/2 Washer Slip on the RF Adapter then the Washer and Hit the WASHER with the Hammer one Strok

^ Duckling Sounds Like he Knows what hes talking about.

My G&G .28's Are on the Way, I am currently Running .25s and The Range is a little Bit Better, Depending on the NPAS Setting, I have 2 Bolts, One is a SD Vavle one and One is a NPAS, with the SD Definitely Significantly better Range and Accuracy, Chrono....Mentioned Prior. Mine too, All My 6 Did. You gonna find a better price Mate? That I think Tops at the Lowest Price Available and Also use UPS Saver. 30 USD to Ship Yes, RANGE and ACCURACY DEPEND ON FPS, WIND-AGE and BB WEIGHT

Greg. If you are Gonna Run a 300mm Dont Buy the Action Silencer In My Opinion, If you like the look of the Tracer, You can Buy a JG One for 30 and Use that as your Silencer,What I am Doing Now,

With .25 G's and a SD Rocket Valve and My 220mm EDGI. With a Warm Mags (IE Under Arm Pit) No Water. I was near 500. Around 490-501

I think I asked this....but what BB's Are you Guys Using .28's or .25's

There is 2 EDGI's... One is US Based as Just a Reseller and Sells what Ed Ships them From Taiwan There are not Listed only Email Only Available, THIS IS THE REAL EDGI.....http://edgicustom.blogspot.com/

In the Previous Post, You Have to Email ED at edgi_langis@yahoo.com

Incorrect, Yes that is Possible but EDGI is a Privately Owned Company Under the Discreation of EDGI Langis..Like Dairy Queen and 7-11 They are Privately Owned and Operated but Report to the EDGI Custom Langis office So Baically Your Paying a another Shipping fee, Plus a Surcharge fee for EDGI USA to Make Money and Ship it to you

I have a EDGI 220mm 6.00 Tight Bore Barrel. Which I think Out Performs the 93 Autos by a Mile. PM me if your Intrested KSC and KWA Are Completely different comapnys. I love KSC more than KWA. The KSC seems to me to be a Little Better Quailty. There Taiwan Version is also called System 7 and FEATURES a 430 FPS Rocket Valve comapred to a 350 and the Taiwan Verison Had Heckler & Kotch and GMBH Trades and Cal 4.6 x 30 ///Comapred to Energy >1 Joule and Caliber 6mm and a Serial Number Yes the Taiwan also has a Higher FPS. Yes The Gun Has No Umarex. The Body

You have to Email RA Tech, Also Just Contact them on what you want to Order. They Responded to me in 24 Hours with English and a Price Quote

Speed...If you are willing to Re do the Threading and something to make the Barrel Flush and Flow like you Never Cut it then Yes....I would take my chances and Put on a AEG

Kic BB Gun has them. They Need the Ready Fighter Adapter. The KSC Taiwan is basically the KWA with Proper Trade Marks and No Umarex. And RA Tech is Where I got my MP7 and Mags From

I have Good News, on KIC BB Gun I found the New Silencer, But you need the Ready Fighter Adapter for it, its Like 20 USD

The Maximum Right now is the M93R Barrel from WGC Shop, ATM I am Running the 220mm 6.00 EDGI Barrel which is the best in my opinion but the Tracer Doesnt work with it