Forze

Hey Ruse, i usually buy at following stores: taiwangun.com (very good for china stuff; no import taxes) firesupport.co.uk (very good for parts & CA/G&P/TM aeg's / GBB's: no import taxes) www.uncompany.com / www.wgcshop.com (very good for everything: but with import taxes (and a lot of them: mostally 25%-45% taxes)) www.dentrinity.com (very good for rare & exotic stuff: but also with taxes same as the others)

Yes they do , the same with 2 AK's, 2 MP5's, colt M1911's, ...

the arsenal at this moment: 1st row: ACM M500 6mm Maruzen M870 with G&P mad dog parts Custom MP5KA3 with PDW stock (using Galaxy internals & CA externals) 2x ARMY golden MEU's KSC G19 2nd row: ACM Benelli M3 S90 Dboys steel/wood AKMS Cyma steel/wood AKM 3rd row CA MP5A3 A&K M60 MK43 mod 0 A&K M60 classic

& if you change the hopup rubber to a systema one it's even quite accurate too

local weapon shops like Wapens Lang in Antwerp, Van Nieuwenhuyse in Wetteren etc. Most real steel parts are compatible with a little adjustment & McGyverism .

been through it's second skirm now & i can say: BEST SUPPORT GUN EVAR (in my airsoft career which means a VFC MK43, CA M249, 2 different A&K M249 & an A&K MK43) got a range of about 50-55meters with a very nice spread (circular pattern), making sure everyone ducked down at this range (& beyond apparantly ). Shot about 4000-4500bb's (Bioval .20) without a single hickup or problem (only used up 1 and a half small type battery also). The only "negative" points were: the shoulder rest got a bit loose (fixed it with a screwdriver) & one of the bipod legs' screw g

gbb-alicious my dear man

By the way: excellent job guiness on the body prob: i just remembered my mk43 did have a tiny bit of flex between the 2 parts, fixed it with tape & it's perfect now. I also found a custom way to fix the bipod legs to the swivel: i was able to put a pc-case screw next to the leg screw (CCW against the CW leg screw) & it holds perfectly (for now ) i tested it dropping it to the floor 5 times at about 10 inches distance, still held w/o any problems. The folding of the bipod is very tight now, but i consider this a benefit instead of a problem. I'll check it ne

havent had any problems with the body yet any way the bipod mound has arrived, but the screws from the A&K are too small gonna find a solution for that one now

Ok i've just purchased a new bipod assembly at http://shop.ernstarmory.com/product.sc?pro...mp;categoryId=8 Thank god they are able & willing to send me some parts (apparantly i've even dealth with them before great guys to work with ) 'll keep ya guys posted! edit: The people from gunnerairsoft are also going to contact A&K to possibly be able to order M60 spares

anyway The bipod problem is sticking it's ugly head up on practically all A&K M60VN's i have now contacted nearly everyone who sells either M60 bipods (or parts) & nearly every airsoft store, dealer, distributor. most of the replies were no go's (even got a threat: i would be reported to homeland security for not being a US class 3 license owner ) & for the others i'm still awaiting replies. I also contacted Gunnerairsoft & RSOV if they were able to order the spares straight from A&K. If not i'll check up with Frontiers to adress this problem next

Problem is that i would like to buy a real steel one, but nobody wants to send them to europe damnit

Well i took the gun to it's first skirm today & i can say the following: It's one hell of a support gun, excellent ROF (for use on this field) & quite easy to use with the sling. Unfortunately i slipped while carrying it, causing a part of the bipod assembly to break off. The bipod cannot be stored in the closed condition now. I already sent an email to taiwangun so we'll see about a new bipod.

aye i know, also have the MK43 used to have the VFC one, which was *suitcase* unfortunately

i'd say check the review http://www.arniesairsoft.co.uk/forums/inde...howtopic=181075 threw about 500 rounds through without a single misfire or problem while testing the hop fix & spring change, so that's ok for the moment. i'll be using it next weekend @ a skirm, so i'll continue the review somewhere next week.

Family pic Left: ACM Mossberg M500 with ATI heatshield/ghost rings & ATI gripped cocking handle Maruzen M890 with Mad Dog kit & folding stock Custom H&K MP5KA3 2x ARMY MEU (gilded) KWA Glock 19 (my first GBB, sniff ) Middle DE M3 Super 90 VFC FN Scar-H (awaiting EGLM) CYMA M14 with wood stock, upper ris & KA M3 scope Right: A&K M60 MK43 Mod 0 - awaiting upper rail placement & eotech A&K M60 classic CYMA AKM KALASH/DBOYS AKMS Needs moar guns imho

Here beretta: www.taiwangun.com it's in poland, so no extra taxes to pay

(i'll Continue here since i can't post any more pics above) A pic next to it\'ts brother, the A&K M60 MK43 Mod 0

(before you read furter: i\'m belgian & English is not my native tongue, so excuse me for spelling errors & bad terminology) Motivation For years (6 of them to be exact) i have been waiting to buy an M60E1 to airsoft with. For years i tried to save up large sums of cash to buy the TOP (which was ok after spending as much money on upgrades, but still plastic), the inokatsu (wich weighed 15kg & cost 2600usd without shipping) & the asaki copies (which were almost as costly as the inokatsu & practically impossible to find). 3 Years ago i bough myself the VFC M60 MK43

-Cyma M14 -Cyma Rail -Taiwangun wooden m14 stock -CA bipod with vfc m14 mount -KA M3 with G&P high mounts

Dboys?

then prositute yourself to some old ladies, there will be some old widow on the Isle of man looking for some young airsofter flesh or else a hairy farmer does

redwolf still has some in stock

ams teh gun room one Cyma AKM is missing from the pics (lent it to a mate )