Jump to content

Shabby

Members
  • Content Count

    17
  • Joined

  • Last visited

About Shabby

  • Rank
    Member

Additional Information

  • Country
    United States
  1. Shabby

    KJW M4

    Hey all, I recently purchased a V1+ bolt from Cradle Airsoft after my v2 bolt snapped and have had issues getting the gun to cycle. I'm able to pull the charging handle all the way back with no issue but it is a little stiff when you initially pull it. When I pull the trigger, gas is released, the bolt tries to move back (usually only going at max an inch), the hammer is usually locked back again, and a BB is loaded into the chamber, but it does not fire the BB that was already in the chamber. After trying a few times (unjamming the BBs every time) I was able to get the gun to fire, and after a number of dry fires the gun did lock back a few times. I have no been able to reproduce this however this morning when I tried a bit before classes. I used silicon spray as lubricant as the V1+ came unlubed except for the o-rings. Any ideas?
  2. Shabby

    GHK G5 First Impressions.

    Hey guys, I recently got a used GHK G5 and have run into an issue. The gun fired just fine until I hit a massive jam while going full auto. I had forgotten to secure the front end when firing (was trying to figure out how to fix the charging handle as it broke in shipping) I quickly realized what happened, secured the front end back on the gun, and tried again. However, whenever I'd pull the trigger, the gun would fire once, and the next time I pulled the trigger I'd hear a soft "thuck" and the gun wouldn't fire. I opened the gun up, and after a fair bit of poking around, I figured out that the piece I've pointed out in the pictures below, when pushed forward, would allow the firing pin to move forward. I'm stumped. Other than taking the entire trigger set apart, I'm not sure what to do. If anything, I'd like to ask someone to open up their gun and see if their part (G-5-22) sits in the same spot as mine does. Thanks!
  3. Shabby

    KJW M4

    Really? I just purchased a falcon bucking and tightbore. Raven had mentioned liking the falcon bucking which is why I went with it. I'll try it out and see if I have the same issues.
  4. Shabby

    KJW M4

    Hey all! I just recently became a member of the family! I bought a used KJW and so far I absolutely love it! This is my 3rd GBBR in my shift away from AEGs. It's a V2 with a Noveske rail, Cradle velocity reducer, the TDC mod and I added the magpul furniture. I also have the falcon hop up and 6.03 TBB on the way. I had a few questions for you guys. There is a slight wobble between my upper and lower receiver. It isn't much but, but it's still annoying. Any known fixes? After adding a B.A.D. Lever, when changing mags with the bolt back, if I use any amount of force putting another mag in, the bolt will automatically release and move forward. While convenient, I fear this may be due to wear, or some other problem. What should I look into for this? With the velocity reducer, is there anywhere online that gives you an estimate with what FPS you'll get with the amount of spacers in it? I don't own a chrono, and would like to be within a new field's limits. (I'm aware that the TBB will also affect FPS, but it won't be here in time for the first game at the new field.)
  5. Shabby

    KJW M4

    That looks fantastic! What length inner barrel are you running in there and how does she shoot?
  6. Shabby

    WE G39C GBB

    A possible easy fix I just thought of, is there anyway to put a spacer behind the negative end of the battery? I'm assuming one of the batteries is losing contact with positive connector when the recoil is forcing the spring to compress, which is why is turns off. Figure out a way to prevent it from losing contact, and you just saved yourself from having to buy another EOTech. Hope this helps.
  7. Shabby

    WE G39C GBB

    No wobble what so ever. Though I couldn't tell you about the bayonet mount. I don't have any experience with either.
  8. Shabby

    WE G39C GBB

    if you've never used Gorilla glue before you have to be really careful with it. It expands when it dries and will seep out through cracks. Just a friendly warning
  9. Shabby

    WE G39C GBB

    Another quick noobie question about GBBRs, is there a break in period for anything in the G39? I know some people swear that TBB barrels have a break in period, as well has buckings. I haven't noticed any change with my KMP9, but then again, it's a CQB spray and prayer for the most part. The only issue I had with that was leaky mags. And I still have yet to shoot mine... Still waiting on my friend to get my propane adapter back... Tis torture seeing this thing just sitting in my room, begging to be shot.
  10. Shabby

    WE G39C GBB

    Maybe the gremlins went on strike? Or perhaps they saw that I got a new gun and are on their way to my place. I mean, I got a lemon KWA SR-10, which I've had to drop another $100 into a $380 gun just to get it working again, and I still have parts I need to replace. (Had a bent gearbox in it, which caused tons of problems, but I only figured this out after the warranty ran out, and I opened up the gearbox to find all of the wear marks and a bushing in pieces.) Hopefully my G39 won't have any issues.... *death glare at gremlins.*
  11. Shabby

    WE G39C GBB

    I'd love to have the new Idz stock, but I don't think anyone in the US has it yet. And I'm not about to spend $47 on shipping...
  12. Shabby

    WE G39C GBB

    Sure thing.
  13. Shabby

    WE G39C GBB

    My G39E finally came in, feels amazing. I can't wait until I can get my propane adapter back from my friend to shoot it!
  14. Shabby

    WE G39C GBB

    Yeah, I was asking about cheaper scopes because I unfortunately don't have a limitless budget. But thanks for the input though. Also, I'm not familiar with the term "Dual Optic" Is that like an ACOG with a red dot on top of it? Pretty two separate optic systems in one? Or were you referring to an EOTech with a flip up magnifier behind it?
  15. Shabby

    WE G39C GBB

    Hmmm, I'll have to look into it. I don't mind if it doesn't work with the G39, I'll just slap it on my AEG. Thanks! **EDIT** I'm looking more for a scope with adjustable zoom. I'm going to use the G39E as a DMR.
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.