Oshiha

The foregrip is for carrying the AEG when I'm not shooting. Though I do think I need a shorter one

Not entirely matching but w/e. i'm on the right

Got better shots: First one is mine, second is my buddies. For anyone who cares, these were shot with a 5D Mark II, 24-70 lens.

Unfortunately no. The FPS max for any gun that isn't a bolt action is 425. Bolt actions have a max of 500 FPS.

My gun (the longer one) is electronically locked to safe-semi-3 round burst. I can run it full auto at about ~30rps, but I have it set up so that the 3 round burst is ~ 30rps. The shorter one is still safe-semi-auto

Me and my buddies custom M4's

Gun has awesome externals Gun has a VERY bad gearbox shell (can crack easily) The microswitch is horrible Compression parts could use changing Very easy to take apart

Without the ROF being dialed down, it clocks in around 33 bb/second.. which is an overkill IMO. I dialed down the ROF to 25 bb/second, with SAFE-SEMI-BURST (3 rounds). Before anyone asks why I went with 14.09:1 gears instead of 20:1 gears (would have gotten around the same ROF), well that just means the AEG is capable at pushing up to 33 bb/second if need be .

Gun is not quite done yet, but its been 3 months since I got the base gun! The parts list are: G&P Sentry Madbull Dragonfire 16" rail system G&P M16A2 stock G&P sniper grip Prometheus 455mm 6.03 TBB Prowin hop up chamber rhop + modify flat nub Modify piston Siegetek 14.09:1 single sector gears Lonex A2 motor Low-resistance wiring Extremefire Cheetah 2N mosfet and a 11.1v 3200mah 35C lipo

Gun is not quite done yet, but its been 3 months since I got the base gun! The parts list are: G&P Sentry Madbull Dragonfire 16" rail system G&P M16A2 stock G&P sniper grip Prometheus 455mm 6.03 TBB Prowin hop up chamber rhop + modify flat nub Modify piston Siegetek 14.09:1 single sector gears Lonex A2 motor Low-resistance wiring Extremefire Cheetah 2N mosfet and a 11.1v 3200mah 35C lipo

Air nozzle does not seal great, make sure to shim (as always), turn off the hop up when you swap barrels. The FET and electrical components are a tad iffy because of the lame microswitch. Don't run the gun in a very stressful setup or your GB shell will explode..

Nice.. What internals did you put in and what were the results? I'm looking to get the CYMA EBR as well

So the cheaper Masada has a better GB shell then the more expensive Masada? Thats funny. Good to hear for future Masada SV owners though.

Yep, I'll be running a Extremefire Cheetah 2N FET w/ Triggermaster software installed. The FET will reduce the rps to a stable 25-30rps. I will also be rewiring to low-resistance wiring, 16AWG wiring to handle the current.

I'm using a modify AUG piston without any modifcations

I have purchased one and it will be here next week. I am already planning on upgrades to it. Lonex POM piston head Lonex red piston Riot 14.09:1 SSG Lonex A2 Spring for 410FPS Rhop AJAX STS Radius gearbox Sorbo padding 11.1v 2200mah 35-70C lipo. Let me know what you guys think.

Haven't got a picture yet, but planning to build this AEG within the next 2 weeks. Vltor body 16.52" Madbull Dragonfire rail PSG style pistol grip Vltor EMOD stock 18" outer barrel Let me know what you guys think

That is a nice looking AEG. Glad a ACOG + doctor sight looks good on that. Fixed my grip on my MP7. Got the FMA metal rail system for the MP7 off eHobby and using a KAC front grip until I can find a shorter one.

Had no clue this existed.. now to find a grip that is the same length as the original one so I can stand it up .

That was the goal! God damn it.. I snapped my front grip off the MP7 body...well thats a bummer. On the bright side, I got my reflex sight, angry guns 3 position metal stock bars, and sling swivel for it!

Yeah I slapped it on there for a recent CQB game to use to doctor sight hehe. I am excited for the reflex sight to come to make it look beast

KWA MP7 w/ Surefire M952 replica, HK supressor, ACOG (waiting for a reflex sight to come)

LYNG on ASM just finished his 9mm Masada gearbox shell. Heres a link http://forums.airsoftmechanics.com/index.php?topic=8435.0

Is there a guide to install this? I am clueless..

To push the Masada further without much damage to the gearbox, here are the mods I plan to do/already did. Let me know what you guys think, I have complied this list from this whole 129 page thread + information on ASM. GOAL: 250-300 Feet accurate 400~ FPS 455mm Prometheus 6.03 TBB already installed SHS High torque short motor SHS High speed gear set 18:1 Modify AUG cylinder kit ( cylinder head to be sorbo'ed, cylinder, polycarbonate piston + piston head) Modify 8mm Bushings Purchased new nozzle (http://airsoftpro.cz/eshop/product_info.php?products_id=1522) M120 or M110 spring