-
Content Count
48 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Rainer1989
-
I love that first photo Wingmann!!
-
-
Gear craft combat pants (http://tacgear.ru/combat-pants) in SS leto Some pictures of the details Stretch panel in the rear part of the waist, note that the rear pockets have velcro instead of zipper. They haven’t stretch panel in the groin, neither an extra fabric piece. The kneepad lateral position is ajustable from both side The big pockets are equipped with the “stabilizer”, like the Crye ones There’s no waist adjustment The height of the kneepads is adjusted by the strap inside the front pockets The lower part of
-
I know that ss summer combat pants are not used, and I have the standar partizan pants which I use when I am supposed to dress "correctly". But has others say, I like ss summer camo pattern and the confort of the integrated kneepads. Anyway, seeing SVDs with custom fited RIS and combat attacs uniforms used by real units I don't get the point on being so "correct".
-
Yes, I was surprised too, I just measured the maximum perimeter, at the height of the butt, of one pair of G3 which fits me perfectly.
-
The pants are from Gear Craft http://tacgear.ru/combat-pants But you have others from Giena Tactics http://gienatactics.ru/clothing/combat_uniform/combat_pants/combat-pants-emr1
-
Not exactly an AK variant.. VSS Vintorez KA
-
-
Thanks Skarclaw, but I am looking for the reversible one.
-
Could you please post a link of the item in Amazon or Ebay? I have written them but I haven't got any answer neither.
-
Glock 17 gen 4 SA
-
It's a practice with the Marui frame, thanks for all the advices, I will use them with the Guarder frame.
-
G17 TM GM Costa RMR kit
-
Glock G17 Salient Arms International tier I VFC/Stark Arms
Rainer1989 replied to Rainer1989's topic in Pistols (Gas)
They fit in the SAI, I'm not sure about the other models.- 15 replies
-
- Salient arms
- salient
- (and 8 more)
-
I can confirm you that the new DTW can take mil-spec barrel nuts and Systema barrels, no idea of the upper and buffer tube. My G&D motor failed a month ago or so, I have replaced it with the Etiny, the original electronics keep working fine.
-
Glock G17 Salient Arms International tier I VFC/Stark Arms
Rainer1989 replied to Rainer1989's topic in Pistols (Gas)
I would really appreciate a video with the mods you made to the trigger Icolater, because I already disassembled and filed it a little, but with the shortest trigger travel it still malfunctions. BTW, I forgot to mention in the video that the pistol came completely ungreased, just like my previous SA. Had you guys have the same problem with SA?- 15 replies
-
- Salient arms
- salient
- (and 8 more)
-
I have made this video review of the Glock G17 Salient Arms International tier I VFC/Stark Arms. Is my first video review, sorry for the audio sinc of the last part, any feedback is welcome!
- 15 replies
-
- 1
-
- Salient arms
- salient
- (and 8 more)
-
The first and most important thing is to change the hop up, in both, the A&K or the G&D. My motor in the G&D has failed after 18K BBs, but the electronics are still OK. IMO and experience you just need to change the hop up with a Systema one and then replace any part if needed.
-
Still available in some aliexpress shops, for example this.
-
You can try the Big Dragon copy which is decent and cheap.
-
It cycles faster, do to the lighter slide (95g), as Katotaka says. The trigger pull is hard and long (for me this is the mayor drawback of the gun. The feeling is really good for the price, except the barrel Finish that comes off really fast. I owned a SA G18 gen 3 and there are some improvements in this model; the trigger mechanism now does´t have the full auto function, the recoil spring guide is metallic, the hop up rubber has a new design... One important think to mention is that all the Stark Arms I have, came very poorly lubed from factory, causing many malfunctions OOTB.
-
Not so bad, all the other improvements are fine, the steel buffer tube, the mini mosfet, the burst programable ECU, the magnetic bolt catch... I have used the DTW with all the stock internals except the crappy hop up chamber for 5 months and I am really pleased. The problem with the rotatory hop is that it needs tight manufacturing tolerances, and this means at least using CNC to finish it, but is made by molding. They should know that they can not achieve the needed precision by casting and avoid this design or do it by CNC. I bought mine in AsiaAirsoft. I made a little review in
-
It is already released, my 2014 DTW came with it. It'a a huge , it doesn't hold the same hop position and the adjusting ring is really loose. Apart from this, I am really happy with my DTW.