alexishere2008 Posted April 25, 2008 Report Share Posted April 25, 2008 I know there are things you can put in so that when to put it on full auto and pull teh trigger and do some wierd things it goes to burst but is there any way to have a seperate control for it? EXAMPLE Auto >>>>>> Burst>>>> ^ Single> O Safe=/> Link to post Share on other sites
renegadecow Posted April 25, 2008 Report Share Posted April 25, 2008 Installing a burst circuit means that either your full-auto or semi-auto gets turned into burst. However, by putting the circuit on the full-auto, you can switch between burst or full if your burst circuit is turned on or off. You could install a microswitch that does this, but putting it mechanically in place between modes in the fire selector itself would be difficult, though not impossible. This is how the old Sig 550/551 did it. Link to post Share on other sites
Svack Posted April 25, 2008 Report Share Posted April 25, 2008 suggest you do a serach, someone created one once on here that worked as an extra fire mode Link to post Share on other sites
UrPeaceKeeper Posted April 25, 2008 Report Share Posted April 25, 2008 suggest you do a serach, someone created one once on here that worked as an extra fire mode SW-Computer allows you to do 3 round burst and if you hold it after the burst, a half second later it will switch over to FA. 65$ but you wont get the trigger group correct but you'll have all three fire modes Link to post Share on other sites
Svack Posted April 25, 2008 Report Share Posted April 25, 2008 no, there was one that someone had created that actually made a 3 round burst between semi and full using a modified selector plate, a microswitch and a fancy board they designed Link to post Share on other sites
digger68 Posted April 25, 2008 Report Share Posted April 25, 2008 It was Yuri, who made the burst function between semi and full. http://www.arniesairsoft.co.uk/forums/inde...l=burst+feature Link to post Share on other sites
alexishere2008 Posted April 26, 2008 Author Report Share Posted April 26, 2008 It was Yuri, who made the burst function between semi and full. http://www.arniesairsoft.co.uk/forums/inde...l=burst+feature wow cool thanks Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.