l85 guy Posted February 9, 2010 Report Share Posted February 9, 2010 I was wondering if it was possible to make a AR type hop-up consistent enough to be adequate in a sniper platform. i've heard of the lock washer on the big knob, but is that enough? the reason I ask is because the intend gun is my Sr-47, and I can't really change out hop-ups that easily because the Sr-47 is longer then a regular hop-up. not to mention, I was thinking about it, if I were to take the hop-up tool like on the VFC scar, and put a long rod on it, couldn't I then be capable of more fine adjustments then if i were to put in a madbull hop-up?. its like a record player, the center of the record a lot less distance then the outside edge. So a small adjustment to the out side edge( the rod) means a minuscule adjustment to the actual hop-up wheel. you know what I mean. I already know what to put in nub and bucking wise. thanks Link to post Share on other sites
Bane Posted February 9, 2010 Report Share Posted February 9, 2010 Assuming your referring to what would work itself down to being a G&G GR-25 (SR-25) using the 7.62 magazines, you could always look at getting an adaptor machined to act as a spacer between the mechbox and a standard m4 hop unit, this would allow you to use a Madbull hop.. Link to post Share on other sites
shmook Posted February 9, 2010 Report Share Posted February 9, 2010 this may help, dont know if youve already seen it? (not my work, just spreading the info ) Link to post Share on other sites
banjo Posted February 10, 2010 Report Share Posted February 10, 2010 this may help, dont know if youve already seen it? (not my work, just spreading the info ) Thanks shmook That reminds me I have to do an edit to include spring spacers to it at some point, as inspired by a thread I replied to by Infected Link to post Share on other sites
shmook Posted February 10, 2010 Report Share Posted February 10, 2010 awesome, although more editing from you probably means more work pulling guns apart again... Link to post Share on other sites
l85 guy Posted February 11, 2010 Author Report Share Posted February 11, 2010 thanks for the link, pretty helpful, but had more intended to put a... should we call them a mr Blue Gb? In it when he gets back around to that. I'm gonna see if I can do a mock-up with my drill press and a thing of wood, and if it works out, either see if my friend can make me one on a lathe or just go to a fabrication shop. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.