k.a Posted April 22, 2017 Report Share Posted April 22, 2017 Anyone has first hand experience of installing RS grips to a KWA TT33 ? straight swap or need modding ?. Thanks in advance. Link to post Share on other sites
Brigg Posted May 19, 2017 Report Share Posted May 19, 2017 Short answer: No Long answer:yes but you need to remove material that's hard to get to. And wraparound style on3s don't work because the We is just a bit wider then a real one, leaving a gap. Link to post Share on other sites
CZFan Posted June 11, 2017 Report Share Posted June 11, 2017 Not a single KWA/KSC is drop in for any real part. Its a japan thing Link to post Share on other sites
k.a Posted June 20, 2017 Author Report Share Posted June 20, 2017 Not a single KWA/KSC is drop in for any real part. Its a japan thing Japan thang ain't a good thang, shame as found some on ebay dirt cheap and really wanted to swap to RS but won't bother now, but thanks nevertheless guys, much appreciated. Link to post Share on other sites
Brigg Posted June 25, 2017 Report Share Posted June 25, 2017 The M9 and 1911 are the only kwa/ksc models i know that rs grips go right on Link to post Share on other sites
Cesare Posted June 28, 2017 Report Share Posted June 28, 2017 Not a single KWA/KSC is drop in for any real part. Its a japan thing I have installed RS slide stop guiderod barrelbushing and grips with only very minor modifications most were drop in fit. I have tried to install a cutdown version of the spring but it is so powerful so it won't feed the 2nd round might just need a little bit more cutting. The real problem I had was with the RS trigger. Wanted a fixed trigger without the wobble. It works but goes into full auto. With RS spring and steel slide it is a violent and fun experience. ... but just wrong Tried to file down the rear so it won't fibble with the disconnector but haven't managed to make it work yet. I have also removed the bluing from the ratech steel barrel so it would look more like the rs. Link to post Share on other sites
k.a Posted June 30, 2017 Author Report Share Posted June 30, 2017 Phenomenal, absolutely phenomenal, the only thing that stopped me from buying RA Tech slide is I thought it won't work, kicking myself now for not buying it when E Hobby had them heavily discounted, can't find the old wooden grips neither, they are the ones I wanted to start with but no luck : ( . Link to post Share on other sites
Cesare Posted June 30, 2017 Report Share Posted June 30, 2017 Just remembered there were some cycling issues with the rs slide release so I glued the old one which for no apparent reason is made in several parts? Here in old stock 1968 stamped ministry of interior holster allegedly belonged to former kgb officer The hardest part was making the lower look like old worn blued steel but I think I came pretty close Here in an elaborate Vietnam bring back setup for my south state Texas sheriffs deputy rig. Closeup of AS and RS grips Personally I found the AS grips so well done so saw no reason to get the same except perhaps the odd red ones. Link to post Share on other sites
k.a Posted July 3, 2017 Author Report Share Posted July 3, 2017 Just remembered there were some cycling issues with the rs slide release so I glued the old one which for no apparent reason is made in several parts? Here in old stock 1968 stamped ministry of interior holster allegedly belonged to former kgb officer The hardest part was making the lower look like old worn blued steel but I think I came pretty close Here in an elaborate Vietnam bring back setup for my south state Texas sheriffs deputy rig. Closeup of AS and RS grips Personally I found the AS grips so well done so saw no reason to get the same except perhaps the odd red ones Thanks for the pic's, truly inspirational stuff, frame looks awesome, loving how the finish is worn on controls, I tried weathering my gun with Magic sponge but it didn't take a lot off, will try sandpaper, Ra tech slide and wood grips have gone straight to the top of my buy list. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.