Jump to content
  • entries
    7
  • comments
    4
  • views
    1,179

About this blog

Put The Gun Down!

Entries in this blog

TM 1911A1 Springfield Armory

Well I finally finished my 1911. Here's a few pictures, I hope you like them TM 1911A1 PGC Springfield Armory Metal Kit PDI Koutetsu Springfield Armory Chamber And Barrel PDI Koutetsu Mil Spec Hammer PDI Koutetsu Sear Springfield Armory G.I. Grips PGC Recoil Spring PGC Piston Head

chris u'5

chris u'5

AWOL

For the past month or so I've had very little time to get anything done airsoft wise unfortunately as Im working away from home at the moment. Im away during the week but travel back on Friday nights and leave again on Sunday afternoons which doesn't leave much time for anything really! My TM Springfield project has more or less come to a halt as a result but I have purchased a PDI SFA hammer and a PDI SFA outer barrel recently to finish the pistol off. Along with the 'real steel' SFA GI grips

chris u'5

chris u'5

At Last

Well UN Company finally shipped the correct Springfield frame to me and on Tuesday I began my first attempt at fitting a full metal kit. To be honest I was pretty nervous about the whole thing as its a pretty expensive kit to *fruitcage* up but I took my time and thought about every step and it actually went a lot better than I thought. I had to trim the leaf spring slightly as expected but this took a bit of time for the simple reason that my files are rubbish (I must invest in a decent set

chris u'5

chris u'5

The Results Are In!

In my previous blog I discussed the trouble I was having with my recently installed Creation slide on my KSC Glock 17. Thankfully the uprgade parts I had ordered from Un Company have now resolved all the issues I was having. Prior to installing these parts I had managed to get the pistol operating properly but it definitely wasn't performing at peak performance, I was finding that the slide was locking back but recoil was a bit sluggish and the power seemed to vary quite a bit, I presume the

chris u'5

chris u'5

My First Love

I have been spending a fair bit of time recently concentrating on my AEG and gathering up all the bits and pieces required to start skirmishing (damn you VCRA) but last week I made the decision that I was going to concentrate more time on my first love...GBBs. In the past I have bought many GBBs of various shapes and sizes but I have never made much of an effort to upgrade them in any way. The main reason for this is I have always doubted my ability to do these kind of things properly and my w

chris u'5

chris u'5

Realism vs Fantasy

As I mentioned in my previous entry, after several years of collecting GBBs I purchased my first AEG just prior to 1st October 2007. Strangely enough however I didn't actually fire my new rifle until January 2008! Due to work commitments my rifle lay in its box for several months but during this time I began the airsofters favourite pastime of upgrading and customising my gun. Its crazy how after spending several hundred pounds on a gun we then go on to spend easily double the value of the g

chris u'5

chris u'5

Introducing...

When I get bored I often think I should take advantage of the blog feature here at Arnies but then I think "who would want to read what Im doing?" Well I suppose were going to find out. From a young age I have been around guns of some sort as it is pretty much a favourite family pastime. All my uncles own shotguns and air rifles of some kind. I actually have an uncle who shoots clay pigeons for Ireland and it was him that give me the shooting bug! It all started at the back of my grannies ho

chris u'5

chris u'5

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.