SpecialistR

No no no such behavior should not be encouraged.

Remove your baseplate,pop off a couple of pins and replace an Oring. If you have any questions send me a PM.

Oh it definately goes here,no worries there. For skirmishability you can replace the little rubber/silicone piston head cup thing for a marui P226 piston head since this little part will end up eating itself with time. You might have to file down a MM or two of thickness but I dont know if that's because I bought a winter one. I suspect that the regular ones are just the right size. It will also boost your FPS a bit since it takes more space inside the cylinder. I have the TK version so I dont know if the UHC already comes with a solid piston head. Mine is quiet because of the gemtech outb

Oooh no you didnt! Beat me to the silenced VP70,well done. What version is it TK or UHC,and how does the freedom art slide feel? The only thing it needs is a proper 9mm can. Take some wider shots with the stock on so we can get a better look. I love shouldering mine with stock + supressor,though I also lack a proper can. It has to be THE quietest blowback gun ever with my outback on there. Lastly,should have posted in the silenced weapons thread.

You can attatch the trigger guard to the action without the stock and the mags will catch perfectly by the way. At least I can do it on mine.

Cue the red phone going off at PTS HQ.

This thread needs more G34/35 love. Will take 17L too... /request

Updated collection. Ignore all the orange paint my black flashhiders are elsewhere and I dont have a can of black paint handy. Apologies for the bad angle also. Any questions or picture requests are welcome.

VP70 sez: am SMG to? EDIT:phooey...I thought photobucket automatically resized pictures.

How are the mag changes on the skorpion with the vfg?

Then I should just attribute it to the cutoff lever working itself loose enough to work properly over time? That doesnt explain my results though since semi was working just fine when I first installed the spacer kit. It was only after I had to replace a piston that the burst issue arose. I'll go with that untill something else fails. Right now everything is working as it should so I am happy. Just thought I'd share my experience with the R85.

Well my semi works fine with the spacer kit? I suspect that proper gear timing has something to do with it. It used to do an almost perfect two round burst everytime,sometimes three,the trigger was pulled. It annoyed me so I sat down with it one day and played around with the timing on the gears untill I got it right. I do get the odd two burst every now and then but not for a while now.

You sir,get 20 internets. Update pictures and aditions to the collection coming soon! But for now here's some more blurry HK. Best viewed in the smaller size. I apologize again for the horrible quality but the new pictures will be taken with a MUCH much better camera.

An old pic,but lets see who can spot the non HK weapon first! I'm also gonna apologize in advance for the craptastic resolution. The pic itself is old,but the webcam used is considerably older. Edit: Worth noting aswell,that many things have changed since that picture was taken so please dont ask about any inacuracies.

Sorry for you then. Now for something a little more useful. Pictures of the gearbox disassembled and the internals here: http://s130.photobucket.com/albums/p272/sp...ump/KART%20JAE/ And a few notes. -Motor is no label black end. -Negative motor contact is soldered but positive is removable.(On mine at least.) -Cutoff lever is STEEL! magnet tested,nice finish. Only seen pictures of the guarder lever but it looks very similar. -Spring guide is clear polymer over stainless steel skeleton,also magnet tested. Pegs are part of the steel skeleton. No bearings or bushings or even

Deepfire SS 6.02s fit just fine in the stock outer barrel. Just thought I would share. Also stock inner is longer than 500mm Meassured at 546mm

KA mags?