jotohomomoto

The real steel MP7 uses the Zeiss S-Point which the airsoft replica equivalent is: http://shop.ehobbyasia.com/review/product/...2/category/191/ but....I really like the above mentioned scopes and would probly go with the second one.

i wanted to do something like that except I don't know where to get an accurate replica silencer. If I'm going to have a permanent silencer on the mp7 I want it to be the proprietary one. A longer, tighter barrel should increase the range, fps, and accuracy, correct?

What do you guys think of this scope? Its an Aimpoint replica (Dytac) and it works well; the bb goes right to the red dot (mostly), but to me it looks a little top heavy. Anyone want to trade or have any suggetions? also, is there a video anyone can direct me to that shows how to disassemble the mp7? I plan on getting a tightbore and my hopup is swollen (I think) and I need to take this thing apart correctly. Or should I say, put it BACK together correctly! I guess, I should stop bein' a wuss and just do it already!

Well, I heard back from Airsoft Global and they're working with me as far as trying to fix the problem. This gun was highly anticipated on my part (as you can see from my previous posts) and I really want it to work out. If I can't fix it I'm sending it back and getting the KJW M4. I'll keep you guys posted. I just received the matching Knighthawk pistol and it works fine.

I got the WE KAC PDW GBB last week and the thing malfuntioned right out of the box!!!! The bolt locks back unexpectedly but more often the bolt locks and all the gas rushes out of the magazine. It does this with the green gas mag AND the CO2 mag and it takes forever to change the CO2. Any help would be appreciated.

Does this have their new Gen3 MegaFlow internals? Is Gen3MF just hype? I have an older MEU that sucks and I ordered their KnightHawk Custom because it looks so unique and supposedly the MegaFlow3 internals. Also have you seen the "Kimber" markings version of the WE Desert Warrior? It looks kind of nice.

How long is the tightbore? The one on KWA is 160mm but the measurements say that the inner barrel is 220mm. Check it: http://store.kwausa.com/edgi601mminnerbarrel395mm-2-1-1.aspx

After the 45 day warranty if anything ever goes wrong that you can't handle, you can send it to KWAUSA in CA and they'll fix it for a flat rate of $35. Its good to know they got your back. On the other hand, I've heard KSC has a little better quality and the trades ARE more accurate. That being said, the build quality of KWA has been top notch in my opinion. I don't understand how KWA and KSC can be so "close" yet so "far away."

Awesome, i got the CO2 cartridge out by taking the mag apart, but I'm afraid that part that holds the cartridge is a little warped. I definately haven't given up on this gun, I've had minor problems with almost ALL of my gbb's at first; thats why I specified "out of the box."

Honestly, I'm a little disappointed in this gun out of the box. I haven't been able to get through an entire magazine without some kind of stoppage. Maybe i'm not doing something wrong, but i can't figure it out. At this point, definately get the MP7. I'm not going to be relying on this on Saturday. To make things worse, the CO2 cannister is stuck in the mag so now I only have ONE functioning mag!! Anyone got any suggestions on how to get an empty CO2 cartridge out of a WE SCAR/M4 magazine?

Okay, I just got a delivery from the FedEx guy (3 days flat! from Hong Kong to USA) and I have to say this thing is SICK. With CO2 this gun is unbelievable. I just have to break it in and lube it to get it running how I want it. Also, I don't know if this is going to replace my KWA MP7. The MP7 has a higher ROF, more capacity, and feels more reliable, but we will see in due time, in due time.

I don't care about silencing it, I was just thinking that perhaps a longer barrel would help increase the accuracy and range. Increased FPS is unimportant to me. If that mod was made, the silencer would be a permanent fixture. I think I would like the look of the silencer but its just an idea.

I was thinking maybe use an extended tightbore (one for an m16a3 or sr-16) and cap it off with a Knight's silencer and just make the silencer a permanent fixture on the gun. Whattyah think?

I have the KWA Umarex (I think USA one, but it was made in Taiwan) and the trades are a little inaccurate (Official Umarex Markings & 6mm instead of 4.6x30mm Markings, etc.) If i could do it again I think i'd get the Taiwan KSC but I am by no means disappointed by the KWA Umarex. And yes, the warranty is nice.

Whats the website for Kic BB Gun? I already have the Umarex one, I can get the silencer at Kic? edit: nevermind, I figured out the website but I'm not sure how to order since everything is in Hong Kong dollars. RA-Tech, eHobbyasia, ebairsoft, are all out of stock for the mp7 LONG magazines. I wonder if there are any other Hong Kong dealers that might have these.

WHERE did you get that? I've been waiting for the proprietary silencer to come out. As popular as the MP7 is i'm suprised "they" haven't come out with one sooner!

I don't know if this was posted somewhere else but if anyone is interested in a KWA endorsed tightbore barrel here is the EDGI version and as far as I know, the only one. http://store.kwausa.com/edgi601mminnerbarrel395mm-2-1-1.aspx

Okay, the WETTI KAC PDW GBB is on its way from Hong Kong (Airsoft Global). I did it for Arnies, honest.

Yeah, thats the perfect metaphor for why I want this particular gun. i don't really need it...I use the KWA MP7 as my primary but I like the way KAC looks and its "PDW" status. Plus, I would have the PDW trifecta i.e., MP7, FiveseveN, and then finally the KAC PDW. I'll wait for a GBB P90!!

I voted "NO" because it does get daunting when I see that there are like 50 pages to sort through. I wouldn't mind if Mods/Admins edited threads to make them more useful and informative. The OMG comments are fine but they do get cumbersome sometimes and maybe should have an expiration date. Hell, I've been guilty of an OMG or two in my day!

So I know this question may be too general but are you overall happy/satisfied with this gun? Is it worth the $300+ price tag? I love this gun regardless of its lack of use in current military organizations. I'm within an inch of ordering it from Airsoft Global. What silencer is good for this gun (KAC style)? I plan on using this gun as a primary as I use GBB's exclusively!

Yeah, but I'm not imitating the "civilian" version I'm front'n the "military-armor-destroying" rounds.

great review!

THANK YOU!!!

Have you skirmished the PDW yet? If so, how's it treating yah? As far as the KWA LM4's engine, it uses the patented Force Velocity system which is NOT NS2. The NS2 system is really awesome as I have the mp7 and m226 and they are the best I've used. The KWA Technical Forums are as "inside" as my sources get ... http://www.kwausa.com/forums/index.php?showtopic=2056