Devo Posted September 21, 2009 Report Share Posted September 21, 2009 The M24A2s "Mr.-T" This is the final form of my beauty. (The only Photoshop modification is the pss10 Bolt handle, I bought it later than the photo was taken. ). Link to post Share on other sites
Travis_2 Posted September 21, 2009 Report Share Posted September 21, 2009 Could you explain what you did to incorporate the mag? Link to post Share on other sites
Devo Posted September 22, 2009 Report Share Posted September 22, 2009 Could you explain what you did to incorporate the mag? I followed the same method as the inventor of the mod (Trasher) did. I "cannibalized" a standard VSR stock to get the small part of plastic Which holds the mag ejecting button and the screw of the "hop-up block". I carved out the correct sized hole from the M24 stock, then I glued the plastic part into the hole. Technically I resized and "moved" the magwell to the right position. Link to post Share on other sites
Trasher Posted September 22, 2009 Author Report Share Posted September 22, 2009 And I can say the rifle is working pretty well... Link to post Share on other sites
Devo Posted November 8, 2009 Report Share Posted November 8, 2009 I made one more small mod. My M24 A2T is complete now. The G-spec has a nice short barrel, but the factory end cup (with the screw-thread for the silencer) is ridiculous. The problem is the same with the new TM L96. At least I found solution to the optical tuning issue. I bought an M24 Tactical Muzzle Brake from Classic Army. Inside this flash hider there is a white plastic spacer ring. It is easy to make screw-thread into it for the King Arms 14mm ccw (or cw) silencer adapter for TM VSR10 G-spec. The making of the screw-thread has to be precise! If it is not, all the BB's will hit the muzzle brake! Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.