SlvrDragon50 Posted November 4, 2006 Report Share Posted November 4, 2006 Ya.. Im not exactly the luckiest person with guns.. My G18, G23, SPR/A are all broken but I think my G23 is the easiest to fix for now. I waas shooting off some mags so I could align my hop up but then my trigger stopped firing so I took off the slide to check for a jam. No jam so I then put the slide back on but the slide got stuck so I cant move it on or off and th eouter barrel isnt even completely in. Pics will be up Link to post Share on other sites
garry Posted November 6, 2006 Report Share Posted November 6, 2006 Try wiggling the guide rod a bit. If these are slightly out of line, the slide wont go back on properly. Try wiggling the outer barrel as well. Link to post Share on other sites
Catman Posted November 6, 2006 Report Share Posted November 6, 2006 Does the barrel+recoil spring guide move at all? If not it looks like the slide has wedged them into the frame. In which case and as a last resort: I think you need to get a little violent with it and tap the back of the slide forward to remove it off from the frame. Also is the inner barrel rattling back and forth in the outer barrel? in the pics the inner barrel is too far back - it's possible that if the barrel didn't stay static on the slide as it was put back on that the inner barrel has moved infront of the outer barrel and hooked itself up - in which case as you try to take the slide back off pull down the takedown catch (it's possible it's hung up on that). Link to post Share on other sites
SlvrDragon50 Posted November 6, 2006 Author Report Share Posted November 6, 2006 Barrel and slide is COMPLETELY stuck.. Recoil rod dosent budge.. The barrel seems to move the same.. but I cant tell How can I remove the slide without scratching/damaging the slide Link to post Share on other sites
AngryTrucker Posted November 6, 2006 Report Share Posted November 6, 2006 Have you tried moving the fire seletor switch? sometimes mine does that too... Link to post Share on other sites
TheLair Posted November 6, 2006 Report Share Posted November 6, 2006 If it comes to it, you may need to use force. Don't be afraid, those KWA glocks are tough little mothers. The only thing that might happen is that it will damage the finish. Spray some lube in there and wiggle it around, and see what happens Link to post Share on other sites
Marine47 Posted November 6, 2006 Report Share Posted November 6, 2006 Take better care of your guns dude! Your spr is broken basically because you mixed marui compaitable parts with your ICS. Yea, you need to use some force. It should pop back if everything was running smooth before. I think you're lucky that it doesn't seem like anything is actually broken. I've never delt with glocks, but if this happened to my USP I would take out the mag catch which would release the slide. Is there anything like that on glocks? Link to post Share on other sites
SlvrDragon50 Posted November 6, 2006 Author Report Share Posted November 6, 2006 XD I know... But I planned it going smoothly but the nozzles seem to hate me... My gun doesnt have any ICS internals anyways so it shouldnt have mattered.. I dont know how to take out the mag catch so I wouldnt reallly wanna try that.. Is it safe to use a hammer to move the slide? My Selector switch is stuck Link to post Share on other sites
sadigh Posted November 6, 2006 Report Share Posted November 6, 2006 Pull down the disassembly tabs and hold the gun in your left hand by the grip, then put you right palm on the back of the slide and push on it as hard as you can. If that dosnt work, tap the back of the slide against the stairs or something, only if they are carpeted though, to prevent damage to your slide. Link to post Share on other sites
McMadkat Posted November 7, 2006 Report Share Posted November 7, 2006 Like they have said above, you have a misaligned recoil spring, dont worry it happens to me too! Only thing you can do is hit it hard forwards and it will come off in the end. Be careful when reassembling to get it all aligned right. Cheers, Sam Link to post Share on other sites
SlvrDragon50 Posted November 7, 2006 Author Report Share Posted November 7, 2006 Pull down the disassembly tabs and hold the gun in your left hand by the grip, then put you right palm on the back of the slide and push on it as hard as you can. If that dosnt work, tap the back of the slide against the stairs or something, only if they are carpeted though, to prevent damage to your slide. <{POST_SNAPBACK}> I think I need 3 hands for that. 1-Hold the tabs 2-Hold gun 3-Hit hte slide Sadly, I have two Like they have said above, you have a misaligned recoil spring, dont worry it happens to me too! Only thing you can do is hit it hard forwards and it will come off in the end. Be careful when reassembling to get it all aligned right. Cheers, Sam <{POST_SNAPBACK}> I think I may have to do that... although I REALLLLLLLLY dont want to use a hammer.. and I dont have any mallets.. the only thing I have is a file with a rubber end.. Link to post Share on other sites
McMadkat Posted November 7, 2006 Report Share Posted November 7, 2006 Use you hand, amazing how hard you can hit it, if it hurts your hand then you must be hitting too hard. Just keeping wigglin it and hitting it, pull backwards as well as forwards. Link to post Share on other sites
SlvrDragon50 Posted November 7, 2006 Author Report Share Posted November 7, 2006 Hooray to all.. It actually knocked the file out of the handle but I got it XD but my recoil spring is getting weak Slide isnt moving all the way up anymore +1 to all Link to post Share on other sites
McMadkat Posted November 7, 2006 Report Share Posted November 7, 2006 Glad you got it sorted, cheers for +1! Link to post Share on other sites
sadigh Posted November 7, 2006 Report Share Posted November 7, 2006 I think I need 3 hands for that. 1-Hold the tabs 2-Hold gun 3-Hit hte slide Sadly, I have two <{POST_SNAPBACK}> I meant to hold down the tabs with your trigger finger and thumb whilst holding the gun in your left hand Anyways, glad you got it sorted mate. I remember this happening to me the first ever time I disasssembled my glock, just have to make sure everything is alligned as McMadkat rightly said. Cheers for the +1 too Link to post Share on other sites
SlvrDragon50 Posted November 7, 2006 Author Report Share Posted November 7, 2006 o... My hands arent big enough for that yet.. :/ Im only 14 Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.