Jump to content

bankz5152

Commercial User
 View Profile  See their activity

  • Content Count

    5,281

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by bankz5152

  1. bankz5152
    Gunman hits the nail on the head here! @EDSkar - You know I was on your side right? On my phone, my spelling will suck
  2. bankz5152
    Not to mention been here god knows how long! While 'new blood' would probably be a good thing, I am happy with the way Arnies is. How often do we have some *fruitcage*tard coming on pretending he was on Seal Team 6? or that 'if I wear real body armour then I don't have to take my hits'? Quite nice having a forum filled with genuine enthusiasts who are clued up in airsoft and generally pretty good folk. I'd say 50 posts, get a bit more traffic going.
  3. bankz5152
    How about we all meet in the middle? 50 useful posts, that wouldnt be hard to do but also enough to engage with Arnies. Thoughts?
  4. bankz5152
    Yep its bloody annoying. I stuck a little bit of tape on it which has made it a little bit more solid On my phone, my spelling will suck
  5. bankz5152
    Now if someone could make some less *suitcase* mags that would be great!
  6. bankz5152
    Typical! Haha On my phone, my spelling will suck
  7. bankz5152
    So its pretty decent? I think ill hold off until ehobby or wgc do a sale, im sure they will soon enough! On my phone, my spelling will suck
  8. bankz5152
    Hop bits arrived! Very quickly I might add. Installed them however had a small mishap with fitting it all back together the lil tab that holds the bbs in place must not had seated properly and thus was fired down the brand new barrel rather fast causing it to jam a BB in place. Left a small scratch at the end inside the barrel. So ordered new tab bitty and it will work!
  9. bankz5152
    Long af!! On my phone, my spelling will suck
  10. bankz5152
    haha how is the rocket valve set? My piston is very tight, excellent seal but may be too tight!
  11. bankz5152
    They do fit, just need a little cutting off from what I remember. Hogue ones that is. Reckon the rocket valve set is a good idea? I always thought it would ruin the already poor gas efficiency. Anyone got any info on the FireFly Cylinder Valve?
  12. bankz5152
    Ahh ok I've got you! I did use the old TM one for a while but swapped it out due to poor adjustment! Does it properly adjust windage/elevation?
  13. bankz5152
    How is the MB optic anyway? Easy to use both eyes open? On my phone, my spelling will suck
  14. bankz5152
    Indeed, tis why I enquired about 3D printing it, bring the cist down significantly. I doubt Id be using the MB optic away. On my phone, my spelling will suck
  15. bankz5152
    Anyone seen Rustorks thread? USG/RDS Uppers are sorted due to his awesomeness On my phone, my spelling will suck
  16. bankz5152
    So just bought the ML 6.02 250mm barrel, ML Autobot 60deg rubber, ML Nub for the P90 also ordered some ML bits for my Kriss as the hop rubber is not seating happily (falcon green) over hopping .3gs! Hopefully that will sort the hop issues with it.
  17. bankz5152
    Ordered. Those Autobot rubbers look interesting, hadnt seen those before. Also thanks! Good video. On my phone, my spelling will suck
  18. bankz5152
    So what would everyones suggestion for hop and barrel combo be? On my phone, my spelling will suck
  19. bankz5152
    Same my mags have been a nightmare. I have replaced ALL the orings I can with nitrile ones and a little PTFE which has stopped all the main leaks, however the output valve is still leaking on some of them. Solved this a little by wrapping the tiny oring in PTFE, still leaks but its a tiny leak now not a full blown one. My main issue at the minute has been the hop. Swapped the rubber round and its still dropping at around 140ft, put the same rubber into my MP5 which is getting 180ft+. Rather annoying...
  20. bankz5152
    Of course its a chap on ZeroIn On my phone, my spelling will suck
  21. bankz5152
    No idea. Though the chamber design is rather good. Much better than any other KWA hop I have seen. I swapped the standard unit in my mates LM4 for a 3D printed one that uses AEG hops n barrels. Like a bloody laser beam now
  22. bankz5152
    Pics as promised. As a note I run dry propane with the Vector and add Abbey Silicone oil every now and then to the bolt travel points and a touch of silicone spray on the piston head. Otherwise dry.
  23. bankz5152
    So after 4 years of very heavy use, probably close to 30k rounds through it now, maybe even more. The hop rubber has failed! Nothing else lol, the rest is perfect. Easy as pie to swap out, took less than 10 minutes. Fitted a Falcon Green and its slinging .30g Blasters 200ft. So very happy. Ill post some pics tomorrow of how swollen the original rubber is. Almost 25% larger than it should be! On my phone, my spelling will suck
  24. bankz5152
    So finally solved the issue!! The inner frame was slightly warped in a few places, hammered it flat and polished the inner rails now it moves freely. However now the firing pin wont engage! Just get dead mans click. If i manually reset the fire pin and pull the trigger it just vents.... Update - Swapped the trigger pack and all is good! Something up with it... So now I have one 6" Hairline running rather well and one 10" half electroplated in bits not working at all... I think when I get paid Ill buy a brand new black one, nick all the black controls for the 6"
  25. bankz5152
    Totally forgot about those! Despite having one! Thats the way to go! Would like a G3 and we all know if WE makes a G3 the PSG1 would be next [emoji7] On my phone, my spelling will suck
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept