l85 guy

I didn't see this mentioned, it might of been in the ARMY L85 thread. Will one of these fit in an ARMY L85 or is it too wide?

Dangit, threads like this need recaps every 20 pages, I'm only on page 30 I really gotta look into getting one, likely magpul it, I've got the bug. But first I gotta finish this thread to even know if its worth it!

Anyone ever thought if you could figure out how to increase the mag capacity in the M500s? I was thinking the feed tubes have to come into the body at some point, and those BBs have to turn up into a chamber or something, perhaps you could skip the feed tubes, and reroute a feed tube from a magazine attached to the gun, up to the chamber.

Dang that Maruzen is amazing. And the stock mod is pretty nice actually, I wasn't thining I'd like the looks, but you proved me wrong.

Are CASV rails the only rail sets that can fit, or is the top rail on a SIR rail long enough to work? Basically, I need to find a rail that can be used for the improv'd RIS that will be large enough to reacgh around to rods sticking out just above the trigger, but under the safety

Would someone be willing to post pictures of the trigger mech, preferably the inside?

Before this thread was in the double digits even I had someone make me that, I had the same thought process as you norman, but I don't want to sport the banner around until I own the gun. Which i will.

I would imagine a box or c magazine would be easy enough a modified BB path and a magnum coldshot in with it or a custom tank, then all you have to worry about is cooldown.Annoying blackberry, so hard to do anything!

Can anyone confirm if the thermolds fit in these mag pouches specifcally, normal ones tend to be snug? Mag Pouches I had plans for the new ARES TAR and a ACR, but I think this may just be the winner, along with some goodies.

to the OP or anyone this may pertain, I didn't find the direction of any threads, or if there is any. Judging by the fact it had a flash hider and you took it off, I assume it has some. Also, can it use any aftermarket barrels? What cut type is it. And if the parts are gonna get made, I would definitely but them, i would love to have one of these.

Dang it, dang it, dang it, dang it! I want a KJW so bad, but if they are gonna stop the import, i doubt I would get one in time anyways. I guess now I'll have more money to spend on some MC gear

Planned to put a V2 into the PSG-1, and replace as much of the externals from the PSG-1 with metal parts from the G3, thus giving me a mostly metal PSG-1 with conventional and widely available parts.

I haven't herad anything about this, if so, that sucks. whats their reasoning to singling out the GBB M4s?

Thanks! As for the capacity, I am getting the reoccurring answer of 30rds. Fortunately mags don't seem too expensive. The WGC place has them for $36

Thanks for the pics, man, looks great. But it looks like its missing its selector switch! I thought further on it, since the G3 lower is plastic, could you just carry over the PSG1 lower to keep the looks right, and use a Mosfet, thus looking and performing semi only, only problem would be the selector could slide further then it should.

So do Thermolds fit in regular M4 pouches? If not I can use the AK pouches I have. I think because of the fact this gun is the only GBBR yet that has hold up to any substantial amount of BBs stock, makes it a winner for me. I mean, I'm fine with opening up and having to work on a gun, but not as soon as I get it, I want it to last long enough until I'm fine with opening, it, I prefer to open it when I feel I want to then have to straight from the box. Also glad theres no way these thermaolds are gonna turn into TherMelts like what happened to some real ones with FA Whats a good pla

The stuff from ur-tactical is good, right? I'm mostly wanting it to be strong and not fade, with as much as I would be paying.

Thermold mags don't fit in regular M4 mag pouches do they?

DO real steel grips fit? You mentioned some grips, but you didn't say if they were real steel or airsoft versions. I think I may be looking into one of these, the price is okay, I was gonna go for the AGM M4 until I read that the BBs just roll out when pointed down. My only quirk is it doesn't have a working bolt catch. Also, do you know if the CO2 is reinforced in anyway compared to the GG/propane version, or is the only difference in the mags they bring?

I'm no expert on Mosfets first off, but I think Ab is simply to stop the motor from over spinning, by applying a small electrical charge in reverse, to spin the motor the opposite way just enough to stop at the right time, and this is supposed to help the teeth of the gears. With a regular set-up I believe this eliminates the need for an ARL, but in a precocking system, unless your gun is feeding enough energy to the motor to keep the gears in place, you would need an ARL to do that job. BUt you could still use AB to stop it at the right point at the end of the cycle to prevent unnecessary w

I think if I were to put it into sniper limits i would have to use either standard or low cap mags, which since the G3 mags would hold more than either, I think I would be stuck with using PSG1 mags. Of course if I drop down to DMR limits I would get half as much MED, and mid caps, which means I might be able to get by with G3 standard mags in that case. So it might be better to just go with G3 mags in my case.

I was more of wanting it for options, rather than knowing basically all there is in way of other parts is other systema FTKs. I never liked the precocking system on my L85, but I'm sure with an AEG sniper rifle its a blessing, since you will never be as quiet as a spring sniper rifle. I think what I will be doing is getting the PSG-1 first, and make my decisions from there. Unfortunately the computers on its last legs, so I may be spending my gun funds on computer funds BTW what pouches work with the PSG-1 mags? I was thinking pistol mag pouches

Ah, I didn't know about that. Well, I like that better then the L85s solution. But wouldn't a bore-up kit get me more than enough air output for the regular length barrel? I thought bore-ups were good for barrels up to a 650mm barrel, or am I off?

Thanks for the lead, I'm waiting for a reply. Anyways, everyone has been telling me to get the full gun, I have worked on L85s which I assume is similar, I do like its precocking system, but do hate it when it locks up, was that what was so bad?

I have a plan to mate a CA SG1 with a TM PSG-1, kinda like what was already mentioned before, but reversed. I want to fit the hand guard and barrel, and stock, of a PSG-1 to a CA SG1, thus I will have the ability to use commonly available parts. My plan was to use the metal cocking tube from the CA in place of the PSG-1, but also use a G3 chamber block, but with the PSG-1 length barrel. I realize that structural integrity is a big issue. Also, I was planning to take a look at the PSG-1 hop-up. I know that it is in the same position as a regular G3 hop-up, so space permiting I may try to k