GoLgO 13

Just put this in the ASF build off...

Good point, I forgot to mention this on other boards too. This is in fact a clone, hence the 1600 yen price tag.

Picked up a Crye Glock Holster today for 1600 Yen($17.00 USD) I thought it was a good buy so I felt the need to pass it on... It fits ANY glock with ANY light! It adjusts left hand, right hand, draw angle and belt width. This is all done with ONE screw. I was told KSC/KWA glocks may be a tight fit, but I had no issues. Basically a plastic clip holds the trigger gaurd and top of the slide while a rubber strap secures the gun. To draw, use your trigger finger to pop the snap like so... There is a split in the belt clamp it will dig into MOLLE webbing or

KSC G17 with Pro arms frame and G&P Slide barrel set

It is claimed that through the use of slow start up that the trigger contact arcing is reduced. I don't think that the main benefit of this product would be the mosfet but rather the ability to add burst function to your AEG along with ROF adjustment and lipo low voltage cutoff etc etc simply by connecting a small inexpensive board to your existing battery and wires.

Got one the other day. I only have a TM SIG552 that doesn't already have a MOSFET so i figured it was a good candidate for this. (on a side note, I got the SIG for 5000yen($55 bux!) Shipping and correspondance with Kong was excellent. Shipping was less than a week and I live in JAPAN! Got mine here... http://www.aegwizard.com/ The unit appealed to me mainly because of it's simplicity and the fact that you can buy 1 unit and use it with all of your guns. The unit comes with decent instructions and is fairly simple to use. I wish the SIG had more battery access/space which

fired of several hundred blanks with a full auto GAU and a few M4's. Thought you guys might like these...

Thanks! The Jacket is a Patogonia Gen III Windshirt which was issued to me by the USAF but they won't allow me to wear it in uniform?! I am wearing a Ranger Green USAF Fleece jacket under the windshirt. The pants are LAPolicegear.com's "Operator" pants in OD Green

SnugpaCK "Rocketpack"

Trigger Control!! Sometimes I see guys that have a great backround and good composition but then when they hit the shutter release button they are suddenly stricken with cerebral palsy! Slowly and deliberately squeeze the shutter release being careful not to shake the camera~! Follow through! just like shooting a gun! Why? because Blurry\soft images suck! Do this... Not This!! Lighting Generally speaking most in camera flashes suck. Try not to use them if you can. In most cases they will over expose certain areas of the gun and look unnatural in ge

This takes me to Backround. This is everything else in the picture that is NOT the "Subject." Just a little effort here goes a LOOONG way. Let me give some examples of HORRIBLE BACKROUNDS IN AIRSOFT!!! -Your dirty unmade bed! -Your Dirty Carpet/Floor!! Let me give some good examples... - A variety of related equipment like a Tac vest, shemagh, uniform, backpack etc etc - Any clean plain backround that doesn't distract the viewer from the "Subject" If you have a Bad *ss $10000 dollar GBB M4 with a poorly composed distracting backround, you will not win. Sorry. Do Th

Airsoft Still Photography 101!! Ok well the winter Build Off is rapidly approaching and I feel a quick guide to Airsoft still photography is a must! I'll keep it simple. I know most of us have basic photo equipment at best. I have some serious stuff, but that doesn't mean that I can't rip off an amazing pic with my $100 Canon powershot point and shoot! You can too! First thing on the list is Composition. This is how the "subject" is positioned in the picture. As a general rule of thumb, you want to fill the viewfinder with as much of the subject as possible.

thanks, The barrel has MEU Markings. The chrome is well done on the barrel, but a roughly machined chrome metal bushing seems to scratch it everytime I fire=( The Hammer chrome seems to be done well but there are casting marks/lines showing through the chrome. For 13200Yen It was a good deal. These Marui's can't be beat as far as stock performance.

TM Night Warrior, I loved my Desert Warrior so much I couldn't resist.

AFG+G36C

Threw a FDE AFG on there with some FDE MBUS

I disagree. The balance of trigger response(torque)/ROF with the RS motor is great. This T97 in particular is running so smoothly, it would be a shame to F*ck with it. It snaps out bb's as fast as you can pull the trigger. 20 rps is good to go. He is already going to have to change mags every 5 seconds as it is.

I could have sworn I showed you that? Maybe w/o the AFG, I don't know, so many people fingerf*ck my guns I can't keep track anymore haha! I knew someone was going to ask that when I posted those pics. I shouldn't have been lazy and did this earlier, but oh well. 3 pin takedown FTW

So I threw that 5KU hop up in. It seems like a good unit. I had to remill it a bit to delete that portion of the hop unit that screws onto the mechbox. There is no solid way to get that to work so for get it. here is the modified 5KU unit. Here is the ARES and the 5KU side by side. Just by looking it seems that the 5KU wins over the ARES due to the funnel shaped feeding area. A quick shot of the new ARES bucking. Here is the 5KU with the required parts from the ARES unit. Here is the 5KU in the gun. How does it shoot? Pretty good, but the KA

I never tried the Prowin, but I have the 5KU copy of it. I'll try it out and let you know how it goes.

As far as I know they didn't, My STAR SL9 has a ver III and my ARES G36C has a Ver III. If I said VerII somewhere then it must be a typo.

Yes it'll fit, as well as the gas blocks. Star used to offer their bodies as external upgrade kits back in the day.

Dr. PP, The only propietary parts are the selector plate, the spring guide and trigger switch. If you added a Marui shell, you could use Marui selector plates and spring guides etc etc Punky, The G36 did not come with a grip. The strange looking grip is a Magpul AFG(Angled Fore Grip) which was designed to facilitate the famed "thumb over bore" style of weapon hold.