tangman

Latest iteration of my CPC Crye CPC (Medium Chassis and Plate Bags) Esstac KYWI in front pouch and in left hand internal pocket Paraclete 1qt Canteen Pouch (on rear) ATS Medical Pouch HSGI Pistol TACO x 3 Crye 40mm Single Crye Smoke Grenade Pouch And for when I'm allowed to make bang bang boom boom Same as before but with Ferro Concepts Plate Pocket hanging modular panel First Spear Triple Flashbang Pouch First Spear Small Utility Pouch

It was a complete mount, wire and connector included. The end of the wire which connects to the mount is only a heat shrink sleeve though which fits over the small wires from the mount.. I assume the lemo connector is genuine, cant tell the difference between it and the genuine one and it also fits my genuine LPBP connector.

I got mine on Ebay from this seller http://myworld.ebay.com/ciras2010 came across him solely by chance, probably worth keeping an eye out in case any more come up.

Cheers Frogfish. The mount pictured above is a Resin mount. I drilled 2 holes in the back of it (where the top 2 of the 4 little screw holes on the real one are). Then I attached it to one of these http://www.ebairsoft.com/cover-mount-p-5023.html so when/if I choose to use the NV I can remove the resin mount quickly.and use the NV setup. I do have a genuine ANVIS mount as well but that's mounted on my Gentex MICH "classic" style. Pic from the front

Here's my TMC Airframe, TMC Airframe Shell Ops Core H Nape Crye Airframe Cover Crye Airframe Rails Asgaard Tactical Counetrweight Pouch S&S IR Vlite Ops Core VAS Wilcox L4 Arm Wilcox Bayonet Adaptor Wilcox VAS Lanyard Mini 14/MUM In an alternate setup

....And so it begins, nice one tomster, looking forward to the inevitable Paraclete porn

Thats fantastic news Galactica, any chance you can scan and post the sheet up so those of us with one can distribute it to our own regular sites? etc

Everything in that picture screams WIN!

I agree (with getting a real one) but I had a replica one which was fine, it was a P226 model and fitted my P226 with Prime MBK really nicely. Bit tight at first but just needed to be worn in, think I drew and holstered about 15 times and it was good to go. Got a real one in a trade later on so I sold the replica.

Keep a tally and report back will ya?

Would be interesting to see a longevity report on these. The "use upto 50 times" post on Manc-AS was a bit off putting...still probably end up getting one eventually.

I predict you'll get about 5,000 PM's asking if you would mind getting there DCU's modded the same way as well Very nice

Don't be hating the wood grips now , I used to think Wood grips looked bad on modern 1911's as well but they've really grown on me. It was that or black diamond checkered grips and I think I made the right choice Yeah, it was a G'n'G Custom which was Marui based + a Nova Kit. Not so much a problem fitting, just a lot of patience needed. The lower frame is easily about 3-4mm too wide for the 310R/610R so I had to file the inside of the 310R/610R housing. I also needed to file a tiny bit of the lower frame as well. Be VERY careful if you do this, the wiring f

Considering the M16 barrel length is 20", then I think none of the above All those copies are made for the M4 series afaik..

After seeing Seraph's awesome 1911, I decided I needed to buy some new clothes for mine as well. Unfortunately, they were the same clothes as Seraph's 1911 Vickers Signature Vickers 1911 Magwell Rosewood Diamond Checkered Grips Surefire 310R/610R Safariland 6004 (1911+610R)

Not quite , The upper belongs to a different gun, one which is suitable for all weather, whereas the complete one could be a bit temperemental in cold weather

I love these things

Thanks guys, unfortunately it's not the buffer retainer, I have screwed it as far down as possible and it's still happening AND WE HAVE A WINNER! x 100000000 Thanks to everyone who helped, hope this helps someone else in the future!

Cheers guys, will give all your suggestions a try

rvp, thanks, reassuring to hear Thanks for the input as well Renegadecow, I have an extra Buffer Tube spring that I bought to see if cutting the spring down could increase recoil - My M4 has now developed a problem, everytime I pull the charging handle back, the bolt gets stuck.... Here's the back story. At some point yesterday during the chronoing with the TSC Uni Rod, the BCG got stuck in the rear position, it would not return to the forward position. So I removed the buffer tube to see if I could resolve it and managed to in the end. Everything was reinstall

For those who are interested, here are a few quick impressions on the TSC Uni Guide Rod. Installation was tight, getting the whole assembly into the Valve Rod Stabliser required some force. I can't say how much tighter than the stock one though as a friend installed it for me I'll add that there are no instructions, okay its not exactly rocket science but if you're not familiar with how it works or if you havent read up on any info then you can make some mistakes, me being one of those people. Initially I had the adjusting nut BEHIND the nozzle assembly and not inside it unt

Thanks Marky . I tried that additionally but didnt spend a lot of time on it, will try it some mroe now

LOL, well I always assumed it was just grease/lube of some sort but I just checked to see if I could wipe it off and it does indeed look like dried glue/adhesive.

Hi all, Just got my TSC Uni Guide Rod from Airsoft123, once again great service. My one has the locking screw for it, the screw head is TINY though and none of the Allen Keys I have at home will fit so will pop down to the hardware store later to see if I can find one. I'm having a few problems with installing it though, the main problem is I can't seem to get the stock Part 38 out (the entire Valve Guide Rod housing assembly) out. I've removed as many parts as possible (Part 36, the roller bearing assembly on top of the bolt, the nozzle assembly etc). Here is where I am u

I was sent my tracking number today and it works. Ordered on Saturday 11th, got a hand typed confirmation of payment on the 12th and got sent my tracking number + confirmation of postage today - great service, if they can keep it up I'll definitely be using them again.