Search the Community
Showing results for tags 'sniper'.
-
All these items have barely been used at all. they are about 3 years old. Here is rough inventory: Green gass x3 (not sure how long gas lasts though) pistol mags x3 sniper mags x4 hands, eye & mask protection 0.30 and 0.25 pellets Pistol holster LR sniper rifle bolt action Glock 18 we 4th gen gas pistol + case Was hoping for £220, open to offers.
-
It is with a sad heart that I have decided to sell one of my favourite guns, I have bills to pay and my bike also needs work so it has to go. This really is a truly impressive piece, if you field it you will be the centre of attention. I couldn't bring myself to do it, had a 417D for that ( also going up for sale ). Gun comes as seen, I don't have the original case. I was gonna get a Peli and have foam laser cut for it but needed to source the scope first. However it will come securely packaged in a box with plenty of packaging. Gun is in the UK, payment to be by bank trans
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. It was made from stainless steel. We worked a lot to reach the current size because we want to do it compatible with any of VSR hopup rubber. The newest version is totally compatible with the o-ring grooved hopup rubbers, like Modify or NineBall. It has a soft, buffer to keep the piston quiet and make it more long-lasting.© Owned by BST Works and GBB Hungary
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. Reinforced trigger guide made from a solid aluminium piece. The parts has black eloxated finish. Drop-in fit even with Zero Triggers. You can saw how it fit with our Zero Trigger.© Owned by BST Works and GBB Hungary
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. The side panels were made from reinforced, alloyed aluminium. The pins were made from brezon which is really hard material. The other parts were made from ST-37 steel. You can adjust the trigger force - trigger lenght. The trigger move really smoothly. Basically we sold them with 5 years warranty.© Owned by BST Works and GBB Hungary
-
BST Works - VSR-10 piston, cylinder, cylinder head and spring guide
Batmause posted a gallery image in Member's Gallery
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. The cylinder also was made from stainless steel. We polished it very well, looks like a mirror which reach smooth action. The end is welded, it won't fall out. We recommend to use it with our own parts for the best performance.© Owned by BST Works and GBB Hungary
-
BST Works - VSR-10 piston, cylinder head and spring guide
Batmause posted a gallery image in Member's Gallery
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. We produced the piston from three different material. The body was made from high strengt, alloyed aluminium. The back-part connected with glued screw-thead and it was made from high strenght stainless steel and at last, we placed "plastic" spacers on the piston to reach the really smooth movement in the cylinder. This parts tested and it won't be never worned, we haven't any replacement issue in the past (even after 10 year of use). We recommend to use it with our own parts for the best© Owned by BST Works and GBB Hungary
-
From the album: BST Works
This is an aluminium trigger guard which compatible with TM VSR-10 series, JG Bar-10 series or with Well MB-03 series. The parts machines from a solid aluminium pieces, eloxated in black color and it it totally drop-in fit, even with zero triggers.© Owned by GBB Hungary and BST Works
-
From the album: BST Works
This is an aluminium trigger guard which compatible with TM VSR-10 series, JG Bar-10 series or with Well MB-03 series. The parts machines from a solid aluminium pieces, eloxated in black color and it it totally drop-in fit, even with zero triggers.© Owned by GBB Hungary and BST Works
-
From the album: BST Works
This is an aluminium trigger guard which compatible with TM VSR-10 series, JG Bar-10 series or with Well MB-03 series. The parts machines from a solid aluminium pieces, eloxated in black color and it it totally drop-in fit, even with zero triggers.© Owned by GBB Hungary and BST Works
-
From the album: Weaporn
© by Vivax
-
Like I said, after flipping a coin three times and getting tails three times, I decided to roll with a Muzzelite 10/22 sniper rifle build. I dubbed it "Project Uglystick" (due to its... questionable aesthetics). I divided it into four phases: Phase One: purchasing the carbine and internal upgrades (new hop-up, new barrel) Phase Two: purchasing a Muzzelite stock Phase Three: purchasing a compact scope (2-6x28 or 2-6x32) and mount (M16 carry handle rail) Phase Four: assembly and testing Phase One is 50% complete: all parts have been ordered, paid for and shipped. They just have to arr
-
So, I finally got some extra cash, after all the sources for cheap Muzzelite stocks and all but one source for a cheap 10/22 dried up. And then, during the search for cheap Muzzelites, Google started actively scaring me with all those real-steel forums and people repeating multiple variants of "awful trigger pull". So today, I decided that I have to choose: "buy me now or forever stay your hand". Let's flip a coin, I thought, and got out a quarter-dollar coin I carry in my wallet. "All right. Heads, I wait. Tails, I go for it." And then, I flipped the coin. Like a spaz. Failed to catch
-
It turned out that AirsoftGlobal has custom-built Muzzelite 10/22 for sale - of course, it's stupidly overpriced and lacking some upgrades, but at least I have a clue how the replica really looks fitted with the Muzzelite stock. First thing: the barrel is shorter than on the real deal, and only the thread sticks out - good for me, I can go with any barrel extension to cover up the Falcon 509 mm one. For example, the 240x40 King Arms can I got from my flatmate. Second, the Muzzelite stock isn't much more expensive than normal RS 10/22 stocks - normal ones go for $80 roughly and the Muzzelite is
-
OK, so I'm going to be $700 richer in the coming days. Want to try and persuade me into not starting any mildly-crazy-to-batshit-insane airsoft projects? 1. Mildly crazy: Magpul-kitted SR25. JG based, fitted with a G&G hop-up, nozzle and standard V2 gearbox, with MOE foregrip and PRS stock. Won't cost a fortune, considering that I can get a decent discount at the local airsoft store and knockoff Magpul parts aren't really that hard to get. 2. Nuts: The Space Blaster. Stark S18C GBB with Guarder threaded barrel, AABB KPOS kit, a Docter or C-More red dot and the can I use on my USP. KPOS