the_viral_phantom Posted May 20, 2007 Report Share Posted May 20, 2007 I was browsing rsov and this came up. http://www.rsov.com/store/product_info.php...eaa68d010537c30 Only 20 quid, hopefully they will get round to makeing a decent SL9 kit or just aeg. Viral. Link to post Share on other sites
squeakyL Posted May 20, 2007 Report Share Posted May 20, 2007 ...aside from the fact that that handguard has 6 vents so it's the full length G36 and not the K or KE versions. But still that's awesome. I had to shell out 60$ for a full length G36 foregrip and outter barrel when I still had my G36 Link to post Share on other sites
Jack Bauer Posted May 20, 2007 Report Share Posted May 20, 2007 And now it's vanished without a trace. BLAST! Whenever it pops back up again, as I presume it's likely to do in the coming days, It now utterly ruins every plan I've ever had ever. Ghaa! Link to post Share on other sites
DarkLite Posted May 20, 2007 Report Share Posted May 20, 2007 Tempted o get a JG G36c and one of these sets now... Goddamn it, too many guns. Link to post Share on other sites
FarEast Posted May 21, 2007 Report Share Posted May 21, 2007 Tempted o get a JG G36c and one of these sets now... Goddamn it, too many guns. <{POST_SNAPBACK}> Amen to that brother, any way here is the image. Taken from the front page courtersy of Keith at www.rsov.com Link to post Share on other sites
Galaxy613 Posted May 21, 2007 Report Share Posted May 21, 2007 If/When the item pops back up, what length inner-barrel would it need? Link to post Share on other sites
DarkLite Posted May 21, 2007 Report Share Posted May 21, 2007 454mm IIRC. Classic Army sell a tightbore for it - the kit is a copy of the CA grip set. Link to post Share on other sites
squeakyL Posted May 21, 2007 Report Share Posted May 21, 2007 I thought the full length g36 used a 495mm inner barrel, and the full length (6 vent) handguard is the one pictured Link to post Share on other sites
DarkLite Posted May 21, 2007 Report Share Posted May 21, 2007 My mistake. Link to post Share on other sites
lordyeray Posted May 21, 2007 Report Share Posted May 21, 2007 I looks like the CA handguard, but i bet it's made from ABS. Bottom line, ABS would never feel as good as Fiberglass/Nylon, but it may be a good companion for the JG G36C. Link to post Share on other sites
CobaltSky Posted May 21, 2007 Report Share Posted May 21, 2007 Now they need to make a cheap SL8 kit so I can finally do the SL8c which I've been threatening to make for months. Link to post Share on other sites
BenjaminRombough Posted May 21, 2007 Report Share Posted May 21, 2007 gonna get one for my TMG36 based Star kitted SL9 i just hope that flash hider is removable with a 14mm thread can make the long barrel even longer then Link to post Share on other sites
Skarclaw Posted May 21, 2007 Report Share Posted May 21, 2007 If/When the item pops back up, what length inner-barrel would it need? <{POST_SNAPBACK}> M16/G3 length will fit. Link to post Share on other sites
Fluffy Bunny Posted May 22, 2007 Report Share Posted May 22, 2007 You're right the 36k is the carbine this is a G36/G36E handguard. It's the airsoft companies that have cocked up the naming of the bits. The inner barrel is 495, same as the G3 SG1 Link to post Share on other sites
DarkMM Posted May 28, 2007 Report Share Posted May 28, 2007 You're right the 36k is the carbine this is a G36/G36E handguard. It's the airsoft companies that have cocked up the naming of the bits. The inner barrel is 495, same as the G3 SG1 <{POST_SNAPBACK}> Apparently it's G36 conversion kit made by some company called KE or at least it's what keith said Link to post Share on other sites
my_plague_666 Posted May 28, 2007 Report Share Posted May 28, 2007 the G36k is a carbine, however its not as short as the G36c Link to post Share on other sites
DarkLite Posted May 28, 2007 Report Share Posted May 28, 2007 The company making these is called "BIG DRAGON". They also make a wood kit for the AK47. Link to post Share on other sites
Hvy gear Posted June 2, 2007 Report Share Posted June 2, 2007 thought I'd post here as to avoid cluttering up the forum with an unneeded thread. Keith also seems to have just got a stock of G36 stocks, ideal for someone wanting to create a full size G36 with the fore grip kit. Linky Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.