Cyclops-a-thon

Lt Fenix, what kind of paint did you use on the Zeke kit? Looks very professionally done.

To make it fit, just some trimming on the G&P metal body, mainly removing the "lip" on the top rear. As for the grip, just some filing down in order for it to sit flush. As long as you have a dremmel handy, the work shouldnt take any longer than 10 minutes. Oh, and the stock was purchased as is. It is a Speedfeed "Witness Protection" set; comes with a foregrip too but it looked like it would be way too much work to make it fit. They also make this in wood too if anyone is interested. Just google "speedfeed" and "witness protection"

Echigoya Tuned MAC10 with custom short suppressor. 230-240 FPS w/ .25g bb's. For sale if anyone is interested. Includes custom 7.2v 750 Mah NiMh battery pack & much more.

Stubby Killer w/ Madbull Patriot kit

Maruzen CA870 "Witness Protection"

Took the G&P Stubby Killer front off and replaced it with the Madbull Patriot kit (short)

Yes, I've had this for a while now. Got it through a friend of mine in HK prior to release. Other than Yahoo Auction, you can try source the 2.5 kits in Japan here: http://www.bishoen-hobby.ne.jp/bc058.htm

Thats a great find Jimel. Both are DX versions which includes the cylinder casing, arm and spindle; I wish I could get my hands on that kit since mine is only the frame and outer barrel

Tanaka M19 with CNC Prototype Frame and outer barrel Majority of these kits were made in 2.5 inch and became direct imports to Japan, retailing for aprox 113,400 Yen. The 4 inch shown here is a prototype, not yet available as far as I know. Solid piece of work, very clean detailing and the inner guts are encased by itself (Original uses a separate zinc place inside the plastic body) Night and day compared to the ZEKE kits, but then again, the ZEKE kits cost 5 times less.

external: Guarder frame, slide & steel outer barrel, Laylax trigger & Kimber rubber grips. internal: Guarder recoil & hammer spring, King arms floating valve & piston head set, X-fire 05 barrel & KM hop packing. 280 FPS w/ .03g bb's. Pretty decent range but no so impressive blowback after 5th shot or so; I think the magazine cools down too quickly. Just a handy piece to keep as a sidearm...

...changed the following parts: Replaced the Hop-up Chamber & arm with the First Factory Strike Chamber set. Replaced the hop-up Bucking with a Soft Kurage packing. Replaced the inner barrel with a Prometheus barrel (cut down only about 1 cm longer than the original) Results: Gun fires a clean 340-350FPS with .25g bb's (via Guarder chrono)... Out of the box, as-is I was getting 325FPS with .25g.

I recently purchased a Stubby myself and changed the following parts: Replaced the Hop-up Chamber & arm with the First Factory Strike Chamber set. Replaced the hop-up Bucking with a Soft Kurage packing. Replaced the inner barrel with a Prometheus barrel (cut down only about 1 cm longer than the original) Results: Gun fires a clean 340-350FPS with .25g bb's (via Guarder chrono) with great range & fairly good shot consistency. Once in awhile a stray shot with exaggerated hop-up, but for the most part, pretty straight flight. Initial impression is very good, espe

Yes, but you should get this

I have the 9-ball front sight for sale if that all you need.

Inner-city armoury... CA870 & TM MAC-10 w/ shortened suppressor.

The Frame?

I think with most metal add-on/replacements, you have to fine tune certain contact points to your satisfaction. This one in particular has had no problems or issues, cycles as smoothly as it was when it was stock. Most of the Hi-capas in our group use FA frames of one style or another, but no horror stories in terms of fitting or function. The Inner barrel I'm using is a PDI 6.05mm.

With the TK grip, I prefer the 4.3 magazines. That extension piece was from an old MGC Beretta. The inner barrel runs to the very end of he compensator, so its just cosmetic.

Hi-Capa 5.1 w/ Freedom Arts frame!

Mac-10 w/ shorty suppressor!

CA870 Speedfeed "Witness Protection" grip ANGS Outer barrel ANGS Spring Guide ANGS Barrel stabilizer ANGS Hop set ANGS 6.03mm inner barrel X-Fire spring Sheriff Piston head G&P receiver, loading tube, foregrip & magazine