Geri

I have 3 diferent wood grips but none of them like this Ak-55 and Ak-63 grips.

Fileing the mags is not always necesarry... Just if you have issues with filling and feeding. I really don't see the point in the heavy recoil rod, may it increase the "kick" but also the gas useage, it's causes bigger cooldown and inconsistent fps. The best mods you can do are polish all the slideing surfaces, mod the original chamber to hit AEG hopup nobs, put an adjustment screw in the nozle and replace the buffer O ring on the bbu for a bit better seal. But there is a GHK group on facebook where there are a lot of advices and discussion

They probably have some kind of contract with ghk what makes them the only seller... Othervise it would be cheaper to build a whole rifle from parts, and GHK probably wouldnt like that. The internal parts are cheap, and all the externals are available from lct, or real rifles, expect the receiver.

From 350-400$ max I think.

Just buy it.... I prefer the stock hop, if you cut the guide wings of the nozle it will not brake and pretty accurate for my, btw I put an AEG hop nub in mine. I built in one A+ chamber in an other rifle, and it is awfull... there is at least 1mm space between the hopup and the reciver where it can womble... Lost almost 100 fps because of this issue, it was easy to fix with an O ring between the chamber and the rec, but it sould not happen with an "upgrade" part... The other problem is the A+ nub is a small ball Yes it is... Like it's the early '00... So the tension on the rubber and t

Thanks

Hi everyone, I don't know is it allowed or not, but we put together a litle comunity page for the custom DIY guys, it's not comercial stuff or something so just for fun.... Check it out if you want, and also you are welcome to share you stuff too.. https://www.facebook.com/DTCHUN

Hajji time again

Very nice!

wooow it's a new level now

So I just made something usefull for ak users, I have been looking around for a good fastmag on my firstline, but the simply pressed ones takes to big surface, so I decided to make my own. It takes only 2x2 molle, fits and hold all the mags I tryed, steel, plastic bakelite, 7,62, 5,45, realsteel, aeg, gbbr... On the video it is a realsteel empty mag filled with old srews and weight 892 grams. I will make some beter videos later, but it works fine. Made of 2.6mm kydex.

So I had some leftover kydex from fastmags so I made tihis And I was bored so gace some graphics for it...

Impressive!

Ha-ha-hajji time

nice to see the parts i sent get together again in a rifle like this:-)

Blehhh.... Midwest industies, the longer one.

GHK GBBR aks are reliable... :-)

Not I did, I guy I know, nothing special, just painting and stencils

Thx :-)