Atsalakotos

TM Should really release those accessories separately... Or have they done it already?

Seems very good to me, except the magazines... At that price I wouldn't mind replacing some parts, but breaking the tabs on the magazines would be pretty annoying knowing that each is 40$...

Looks really good. What paint did you use? Are the charging handles welded?

I remembered G&P was coming up with one, so I really hope they released it already!!

@Noveske Is that URX III real steel????

Didn't know G&G has released a rail foregrip! Thanks guys.

It seems like PDI has made a part for the G39 (And everything that has WE M4 style trigger group). I hope they come up with more. Valve knocker: http://www.x-fire.org/we_gbb/g39/valve_knocker/e.valve_knocker.html

@Tbone67 Awsome FN2000!!! Tell me, is that railed foregrip comfortable at all? And where did you get it?

I buy from Airsoft Buddy: http://www.airsoftbuddy.com/index_topic.php?did=10&didpath=/10 They seem to have every trigger part, but I am not quite sure.

I have tried tape like i did with my MEU a while back but it wont fit... Just rely on gravity and dont push it too much if you feel the spring is not in place!

Yeah, a troubleshooting guide would be perfect. Plus a guide for this pistol specificly is a must, because lots of Problems occur when you use this on green gas / propane. Especially if you play in hot climates like me and renegadecow.

Okay,I throughly disassembled the gun and the floating valve was okay. My magazine's Valve O-rings were okay too. The problem was that the magazine catch was so worn, that the magazines didn't seat properly... I feel really dumb for not noticing this!!! Thanks for your help guys, this got me thinking that we really need metal catches! P.S: I remember reading renegadecow had the mag catch problem so I followed his advice, by supergluing a small plastic piece where the catch was worn.

Okay, after fielding the gun quite a bit (2500 rounds or so), and at really high temperatures I can say (Summer in Greece is rediculously hot 35 celcius+) showed me that the gun is really sturdily built. Only problems so far were my firing and hammer pin that fell off, which were really easy to replace. (And cheap) And that leads me to a question for the guys that got the RA-TECH parts. Are they worth it? Or should I just keep going and replacing the parts that fail?

What valve? You mean in the magazine? Because I have 3 of them and the gun has the same problem with all of them...

My 5-7 stopped working again... This time it isn't the chamber's fault. When I pull the trigger 95% of the time i hear a "poof" sound, the slide moves back a few millimeters and it sends the BB out with 100 FPS max... I have tried this with fully and half-gassed magazine and i get the same result. My hammer assembly looks ok, and the slide moves freely if i move it by hand. Any input on this? (I will try posting pictures or a video when I have time)

Well, its not... Its some weird rail that reminds me of the one on the USP, don't know though cause I dont have a USP. But its not picatinny for sure.

Just received my g39K! A quick question though, is the rail on the bottom the same as the one on the USP? If so, can I use the USP H&k to regular rail adaptor??

I have chronoed my G39C with 0.20 stock. (Only the hop up nub was swapped out) With NPAS fitted on the highest setting i got ~400 FPS on Green Gas at 37c and I haven't trimmed the nozzle...

What do you guys think about getting a Railed Scope handle and then installing an Aimpoint Micro, will it sit too high? (Note I don't use a mask)

My G&P Aimpoint holds zero just fine, but the recoil kept loosening the mount, so I used threadlock. In my opinion G&P Optics are really good quallity and usually the same price (Or even cheaper!!) as the China made ones. (Got my aimpoint for around 35 Euros)

Makes sense! Thanks for the tips, it really helped me!

Thanks for the reply, will try that tomorrow when i get back home. But is the really weak recoil and power the cause of the valve delayer? What does it really do? Because the gun works without it...

Ok, my parts are here, but having some major problems. I have installed the new firing pin carrier part: (http://www.airsoftbuddy.com/index_eproduct_view.php?products_id=666) and now my bolt wont cycle properly, its being veery sluggish. Looking further into this, it seems that the Valve locker does not allow the hammer to be compressed fully when the bolt is cycled, making it a LOT harder for the bolt to move, which is the cause of all this! I have tried removing the valve locker and the bolt cycles smoothly, but the gun has very little recoil and power! I am starting to think its becau

Okay! Thanks for the info! Hope its solid...

Okay.. Managed to disassemble my G39 trigger assembly and found out the problem, with the help of the exploded diagram. I lost the firing pin, (Part No. 85) and its nowhere to be found... Time to try contacting WE for replacement parts i guess... Thanks kepp anyway! PS: Is the part I am missing this one? http://www.airsoftbuddy.com/index_eproduct_view.php?products_id=872 I know it says for M14, but don't all the WE open bolt series share the same trigger group? *Cannot edit my previous post...