Wingmann

I ordered a KSC one and one valve from Dangerwerx. I'll make a write up as soon as it arrives.

Now I'm envious...

If you want it at 370 my bet is that you won't need to do anything

Place it correctly over your hips and adjust. It should stay there given there's no excessive weight. Just today I used the straps in the RRV to link the two. That'll also work

Horrible pic of my mismatched 1st line

Correct.

What kind of Swede are you?

Sentry FTW!!!

Yes. If you look closely you'll see that mine is cut so the top is a straight line. It should still be over the nose, but I was needing some extra air

I'd say it's almost perfect for that field during Autumn/Winter.

We were lucky to get hold of a professional photographer in one of the small skirmishes

Do you also hit bushes with it and fold it down?

I've used mine from the start with 7.4v LiPos and no fuse. I'm yet to have a problem with the gun.

Tried to order from them. There was no answer to my e-mails and 10 days later they returned my money in a Paypal transfer... Hard to buy anything that way.

Depending on your definition of cheaply... http://www.airsoftitaca.es/spa/item/ART02856.html

Yeah babe!

As default, the CO2 filled piston bounces between the release spring and the valve spring, making an auto-like fart of CO2. It sounds like 5 rapid shots. I haven't had time to tinker with a softer release valve spring, but I thought another modification that I wanted to try out. I decided to park it for a while while I was getting a part made for me. Unfortunately the part is taking too long to be made... As soon as I get better results I'll post them here.

Very enlightening videos. Thanks a lot! (some more light next time? )

1.- For 330fps on that system you'll need a SP100 from Guarder. The SP90 was giving me 290fps on a 285mm barrel, which is consistent with your results. 2.- This one http://www.infectedarmory.com/AEG_AB_S.html Also, once you open the gearbox use quality white grease on the piston rails and gears to keep it working smooth. She'll love you long time and you'll love her back ;D

Yes, I did with my Sentry Youtube for "sentry overspin" and the response video with the MOSFET already installed. Worth every penny. Unless you find someone that makes them, as they do for me, Infected Armory ones work nicely.

As promised...

Slap that beech! Better pics will subtitute these whenever the sun decides to come out and play

Ah yes, it was me I'm still trying to sort out some problems this kit has. First, the piston bounces back and forth so it expels gas 5-6 times, then the fps is not that great, around 300 when you get a stable shot. To solve the bouncing I'm going to try with a section of a harder spring and/or putting a softer one in the release valve. Also, I'm making a full new hammer to strike the piston instead of launching it against the cylinder. I'll try to make an update as soon as I try that out

Quick loadout for a milsim in which we played as OpFor, minus headwear and gloves. Ammo limit was 500BBs so I had 440 in four mags and 60 for the secondary. I think I shot about 40

I'm familiar with that one Mine shoots at precise 440fps (+/- 2fps) and I'm using a PDI firefly-style bucking and a section of wire as nub Be warned though, eventually you'll need to check the screws, as they'll come lose.