discodante Posted September 24, 2012 Report Share Posted September 24, 2012 It fires perfectly... even when the selector is set to safe Quote Link to post Share on other sites
egalsim Posted October 22, 2012 Report Share Posted October 22, 2012 (edited) Here is my observation on this rifle. It uses a VSR bucking and AK type rotary hop up unit, all metal. To remove the outer barrel, there is a hidden set screw under the rear flip up sight. Review the assembly and disassembly by James on youtube. It disassembles like the real steel version, and the trigger unit is very sturdy; unlike the unit on the WE M14. With .20 bbs, it was chronoing around 560 fps with propane. Valve is the now standard open bolt type. It shoots hard and fast, but be sure to do a couple things before skirmishing and when you get it right out of the box. If you buy this, check this area of the gun first: -Make sure all the screws on the valve knocker assembly have loctite. If any of these screws come loose, especially the screw holding the 2 halves together, or the flathead screw that holds the lever to return the knocker to battery; your fps will vary by as much as 100 fps. You will notice the variance by the force of the recoil being wildly different. I believe that this is also the cause of the super high and low fps variances on some of the tests. Edited October 22, 2012 by egalsim Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.