No Mercy

Updated aimpoint, mount, laser, flashidder and BUIS NM

nothing special knife ive had for about 5 years, Saved my life twice, yesterday being one, decided i should post it NM

rsp, griptape?

I thought there was no real steel pics on this forum? Lol jk man AMAZING RIFLE where did you get the metal body?

I only wish, 10mm bearings are approaching router bearing size, They can achieve 35,000- 65,000 RPM I wish i had 10mm bearings but you wouldnt be able to put gears in them NM

the gearbox shell was $300 Alone, parts were close 400, and a bunch of custom parts and misc ###### done to it, brought it close, if not more than 1000 but it was worth it

The gearbox alone is over a grand 0_o NM

Buy the G&P real steel stock adaptor first next... 1. Cutt the threads off the Stock tube 2. put the stock adaptor on the metal body 3. Drill and Tap 2 holes for Grub screws(Hex) under the stock tube into the stock adaptor 4. Take off the stock tube, and Adaptor 5. JBweld the stock tube onto the adaptor, quickly put the two screws into the stock tube and throught the adpator, to keep it in the right place as it sets 6. Wait for the JB to dry, (overnight) 7. Take the stock off the stock tube, Open the back of the stock tube up 8. Now that the adapter is solid in the st

Thanks, i hate that PEQ also Im thinking of a redimag system but i dont want to cover the trades with that hideous thing, but also dont want to use a Battery bag on my magpul stock im out of options but its not that bad in person

Both my RECCE guns... New green laser and Troy Flashidder on this one yay for Recon Rifles NM

not really, i like to use it beacuse when i play, everyone around me asks if i can see people down range, but they might be to far to hit, but i can see them So i would say, once in a while i get a problem with my range, but other than that in the feild that i play no its great NM

Both my RECCE guns... New green laser and Troy Flashidder on this one yay for Recon Rifles NM

this forum about a month ago, Sparky2129 traded it to me... There out of production, unless you want to shell out 932 for the CNC model Just built one yourself, for about 750

here you go... NM

easy, Just needed to Dremel/ file the 4 tabs on the RAS, they go around the side of the metal body, but airsoft is wider so you need to take the tabs smaller then i just put the top ras on, bolted the bottom cover over the G&P barrel nut, and Slid the bottom ras on.. easy took about 15 min NM

No its the real ta31RCO the G&P ta31 isnt a chevron, its just like the real and replica NSN no chevron, just crosshairs

More recce guns, it will never stop Troy Silencer to Come and some Flip up sights too -Internaly G&P 7mm box with full systema internals m1*0 spring -Externally Prime Crane With 9.6v 3800 Hurricane Colt metal body Systema motor and G&P grip G&P 14.5in barrel Troy MRF-RX 13.5" RAS New flashidder and Silencer to come ~Mercy

Fat albert is a C-130 not a C-5 just for clarification mercy

wrong thread

Accually it is Milspec It was Machined by Mark Haynes of S-Lite out of a block of military aircraft aluminum it was tested by S-lite for durriblility... In the usa, a military light company It can take the biggest spring,in a freezer, overnight on a car battery without cracking ever http://andairsoft.com/preoraaexv2b.html --------------------------------------------------------------------------------------------------- vicious: after finishing the gun yesterday, i have made the executive decision to use a ready-mag insted As soon as i aquire som

REECE Project-Done Internally: MTHaynes Milspec billet Limited gearbox Prometheus Double torques Systema Wiring and all the doo-dads Systema spring guide pdi 1 big spring G&P poly piston Systema bore up Systema torque up motor Systema Hop up Prometheus 407mm 6.03 barrel Externally: Troy Flashidder KA 16in barrel Daniel Defense 12.0 FSP RAS Magpul Coyote grips G&P 10.8v 3300 Peq G&P Blackwater metal body CA Coyote Grip Magpul Coyote m93 stock w/ G&P adaptor Optics: Trijicon Ta31rco ACOG Internals

A Team Mates Hicap collection 2 for every gun

O yes MTHaynes Billet 7mm CNC Gearbox Anodized black, The strongest V2 box ever made, EVER

in the woods ^friend above

Thanks i didnt catch that over 2 months ago... i forgot he told us....