Bostitch

The markings definitely look great...they are crisp and deep, which is a big plus for anyone thinking about painting their gun. I think I decided that I will be swapping over the TM FSB and delta ring and tossing the RIS on this while keeping the barrel 10" making a mod 0... This gun is the full next generation clone, not just the EBB version, so now I also need to grab some TM next gen lowcaps (this just comes with a hicap). I will definitely post up in here and probably do a recoil comparison between this and my GBBR 416 when I get around to shooting it.

Not as cool as the real steal receiver gbbr's, but here is my new to me Army Armament m4 cqb (next gen clone). Haven't tested it out yet but expect a full detailed review (since they are virtually non-existant) before and after tuning the gearbox. Now the real question is...do I swap my TM 14.5" front end/RIS on or keep it as is for now and go FF RIS (mod 2 replica?) in the future...

My newest addition. It started life as a WE HK416C, but quickly transformed to what you see now. I got rid of the unpleasant 416c grip for a magpul MOE SL grip. The PDW stock was also replaced with a real steel buffer tube, buffer, and crane stock. The RS buffer tube is apparently to deep and was causing the bolt carrier front edge to hang on the rear edge of the hammer, so I put a stack of 6 felt pads (for chair feet) in the buffer tube,and voila...perfect. I am also using the stock C buffer spring with two short sections of real steel buffer spring (1" and 1.5") acting as helper springs. The

There sure are some nice watches in here! I was never really a watch guy until I became a police officer, and now I ALWAYS have one on...while not as fancy as some others in here, here are my 2 main watches... My dressy watch My everyday watch

my current HK lineup

My final setup... AWS OCPC AWS 6 m4 mag pouch AWS dual pistol mag pouch Conderp general pouch 5.11 mp5 mag pouch (currently used as a silencer pouch) Chinese MAP 1 point sling (debating hitting it with OD paint Strong side cummerbund is left bare on purpose for ease of secondary draw and comfort in rested position (so I'm not chicken winged over bulky pouches). No need for additional mag pouches or radio pouch as the OCPC has that built into the cummerbund. Pretty happy with final placement of everything. First line is a dragonspine belt (in OD or tan depending on my lo

TM SR16 With the rest of the family

Updated look for my CM16...deepfire 10.5" barrel/hopup set and 9.5" free float rail.

I haven't really seen much information on these types of accessories, so I figured I would do a little write up comparing an ACM Surefire X300 clone with a real steel Streamlight TLR-1 HL. To begin with, I purchased the x300 clone off www.aliexpress.com for just under $46. For those who don't know, the website is essentially direct ordering from China with pretty good prices and free shipping on most items (though it is normal China post shipping...ie 15-30 days AFTER the order is processed and shipped). Unfortunately you cannot order any airsoft guns off there, but accessories and tactical ge

(after looking at your posted youtube channel) actually yes, I did see your video. I decided to route it under and around since there is a much bigger area for the paperclip (or whatever you want to use) to contact, and it should give a stronger contact being a direct pressure on the catch. How is yours holding up?

I know its a couple years late, but if anyone else comes up with this issue, check your trigger bar up front where it goes vertical and points up. when on FA, that is where the bolt carrier hits, pushes forward, and disengages the FA sear from the hammer. If this is bent forward slightly, when the carrier slams home it does not disengage the sear. Most likely you will need to replace it, as bending it back to 90 degrees will significantly weaken it...ask me how I know! Anyways, I recently acquired one of these...definitely a solid gun and seems like it will be fun in games. First thing I

Back again with another TM, this time an m4a1... Now I'm debating throwing the RIS from my sr16 onto this one, selling it, then using the sr16 internals to build a new SBR..

Lightly moded TM SR16 TrYing to decide whether to keep it as-is, or go MBK and have a little fun. I would almost feel bad doing that though, as these are getting hard to find. New to me G&G Wombat machine raider...just a little backup/loaner gun that i traded a we g19 for. Surprisingly sturdy and reliable so far. Has upgraded barrel and hopup. Still need to crack it open and work on the compression.

I haven't really seen much information on these clone lights (aside from the 2 reviews on here for the X300 U clones), so I figured I would do a little write up comparing an ACM Surefire X300 clone with a real steel Streamlight TLR-1 HL. To begin with, I purchased the x300 clone off www.aliexpress.com for just under $46. For those who don't know, the website is essentially direct ordering from China with pretty good prices and free shipping on most items (though it is normal China post shipping...ie 15-30 days AFTER the order is processed and shipped). Unfortunately you cannot order any airsof

The worst part about this is I actually HAD a CA33E...I kick myself every day for selling it. I would love another if it wasn't so hard to find.. TL:

My current HK lineup. I know, I know...I need a G36...

Nothing too crazy, but here is my multicam loadout (not including first line). TMC G2 pants Massiff combat shirt AWS OCPC AWS m4 triple pouch AWS m9 double pouch Conderp GP (yea, I know. Wife needed a $20 item for an amazon order so I figured why not) Also have an AWS M14 triple pouch that's hopefully in production (been 3 months so far) for when I use my G3 Still need a MAP/hydro carrier and a tear away GP/IFAK. Will be setting up a new second line with a gryphon dragonspine belt, dump pouch, and safariland 6004 on belt with 1.5" drop. No Battle belts for me...if there

I actually got the gun like this (traded from a basr) so I'm pretty sure it's all artificial. I plan on painting it khaki and letting it naturally wear back to whatever it wants lol

My KJW MEU...will soon be painted khaki.

You were close lol. I actually got the stock and A4 handguard second hand by posting up a wanted thread on airsoft society...best part is I got both for 35 shipped. Other than the cosmetic wear, the stock is perfect. Locks up nice and tight, no splitting, no broken plastic ring, and virtually no wobble. I have a couple upgrade internals on the way, and plan on lightening things up (internally), since I'm now limited to battery size and haven't made the full jump to lipo's yet.. So far though, I love it. The build quality is just as good as my CA (though not as heavy) and I love the looks with

Finally finished my MP5's in their final configurations...ICS MP5A5 and v1 Classic Army MP5a2. I have to do a full HK family photo shoot now that these two are finished

My freshly refinished KWA KP45 (ns1). Painted slide with Payne's Gray (much closer to real steel slide color than the gloss black kwa likes to paint) and custom front serrations (done by hand). I actually feel the ns1 system shoots better and has more crisp/stronger recoil than my previous ns2 KP45 tac had. And my JG G3A3...very lightly moded (for now) And finally my classic army mp5a2..heavily modified No pics of my project ICS MP5 yet. Will most likely toss a slim grip on the a2 and the surefire on the ICS to make it an a4 or a5.

More recent pics of my SRC/KA M4 Will most likely be going over the Africa mustard with a dusting of OD

AWS OCPC, not quite completed yet. Awesome piece of kit. Pantac Land CIRAS pretty much done. Tac Shield mag pouches and miscellaneous other pouches. actually my pantac ciras is a large, I'm 5'11 and 190lbs and the vest is pretty much adjusted to the smallest possible. The guy i bought it from was pretry close to your size and still had adustability left in both directions. If you're looking for a vest and not a hsld carrier, I'm actually looking to sell the CIRAS...

UTG AK47 that I got in a partial trade. once i got it i tore it apart, shimmed it, greased it, painted it to look a little more realistic than the plasticy blue color, and lightly weathered the "wood". I will be using this gun as a project gun to build a decent field gun, eventually replacing everything with full wood/metal and replacing the stock utg mechbox with the spare CA box I have laying around.