Jagdraben Posted October 31, 2009 Report Share Posted October 31, 2009 Anyone have any suggestions for MOLLE rifle and pistol mag pouches? Link to post Share on other sites
Wayneard3413 Posted October 31, 2009 Report Share Posted October 31, 2009 Eagle FB's or kydex pouches Link to post Share on other sites
Jagdraben Posted October 31, 2009 Report Share Posted October 31, 2009 Where can find? Also: Was kinda hoping they would be cheaper than the ITW pouches. (Which the FB pouches aren't, at least not from SKD.) Link to post Share on other sites
Wayneard3413 Posted October 31, 2009 Report Share Posted October 31, 2009 I picked up all of mine used.. I generally find the pistol pouches for about 10-15 bucks and the rifle pouches for around 20 You should be able to find Bladetech pouches for your rifle mags for a few bucks more Link to post Share on other sites
Jagdraben Posted October 31, 2009 Report Share Posted October 31, 2009 Er... but I thought Bladetech rifle mag pouches didn't mount on MOLLE. Do they? Link to post Share on other sites
Wayneard3413 Posted October 31, 2009 Report Share Posted October 31, 2009 Yup I took the ones off my subload and put Malice clips on them to mount to my belt Link to post Share on other sites
babybackribs Posted November 1, 2009 Report Share Posted November 1, 2009 Finally got my BAD. Still dunno if I want an MS2 sling though. Link to post Share on other sites
Titleist Posted November 1, 2009 Report Share Posted November 1, 2009 CQB match was really fun. Sorry I didn't take photos, it was pissing rain for the morning, and then all the angles would have been terrible. Out of 30 I came in 11th. I had one really *suitcasey* run where the RO didn't explain the rules right and instead of letting me re-run it then basically gave me a *suitcasey* time. Whatevers. Anyways, things I realized. -ICE rig works great -My SBR's zero is clinically accurate -I hate running. Link to post Share on other sites
babybackribs Posted November 1, 2009 Report Share Posted November 1, 2009 CQB match was really fun. Sorry I didn't take photos, it was pissing rain for the morning, and then all the angles would have been terrible. Out of 30 I came in 11th. I had one really *suitcasey* run where the RO didn't explain the rules right and instead of letting me re-run it then basically gave me a *suitcasey* time. Whatevers. Anyways, things I realized. -ICE rig works great -My SBR's zero is clinically accurate -I hate running. Have you ever done anything like this? Link to post Share on other sites
Vercingetorix Posted November 1, 2009 Report Share Posted November 1, 2009 If you want what is basically an Eagle FB shingle, go esstac, as I think they are cheaper but just as bombproof. They make the shingles with removable inserts. Contact Stu or Mel (the owners/operators/designer/everything) on their board and they can sell you the Kydex inserts for em, and the cool thing (maybe other pouches have this, I don't know) is that they are adjustable height. A double open top is only $30 (IIRC) and the kydex for it should be like $5-10 or less, and I got 2x doubles free when I ordered a custom rig from them. Thats some pretty freakin cool service in my book. I actually have enough moneys for an ICE belt, I might pick one up soon. Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 So I got to grab my Form 4 from my FFL/SOT today on the KAC QDSS. I gotta say, it's fairly awesome. It's shorter than the M4-2000, but works just as well and I like the mounting system a lot more. It's a LOT more positive in terms of lock up. Downside is that it's not easy to take off when it's hot. Other downsides are that it's basically about 80 percent more expensive. I had heard a lot of AAC folks trash the KAC can because it's heavier, it is, but it's so negligible that it's not a problem. Enjoy: And because my SOT is a friggin super mega cool dude he just said, "hey you wanna try one of my spare HK 416 lowers on your upper? " Some other videos: http://www.youtube.com/watch?v=affswj3chaQ http://www.youtube.com/watch?v=hTvpQRkCvko http://www.youtube.com/watch?v=f04XarCoEqs Link to post Share on other sites
Wayneard3413 Posted November 2, 2009 Report Share Posted November 2, 2009 Looks like a nice new toy... But man get on that thing, it was pushing you all over the place "Make it your *badgeress*" haha Link to post Share on other sites
Billy Bob the Sniper Posted November 2, 2009 Report Share Posted November 2, 2009 Awe... come on, just grab it and take it off. Looks and sounds good dude. Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 Full auto it was pushing me around a tad, it really increases the blow back on the BCG, like an insane amount. Same goes for semi. Link to post Share on other sites
Wayneard3413 Posted November 2, 2009 Report Share Posted November 2, 2009 Have you tried the RTV trick on a BCM charging handle yet? I have heard several guys state that the BCM has less blowback than the PRI's and with the RTV trick it is next to nothing Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 The HK416 runs were done with a BCM with the silicone trick (Piet brought his to try out), honestly, it felt about the same. It's amazing as even when you're holding your breath you end up puffing out smoke. Link to post Share on other sites
Wayneard3413 Posted November 2, 2009 Report Share Posted November 2, 2009 Haha yeah... Well all those gasses have to go somewhere Link to post Share on other sites
babybackribs Posted November 2, 2009 Report Share Posted November 2, 2009 You could get a heat wrap for it. And was is just me, or did the ROF of the 416 increase the longer you held the trigger? Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 I'm sure the RoF on the gun eventually reaches it's max the longer you hold it down, due to multiple factors (gas, suppressor, etc). Neat lower, but the fact that H&K made it out of spec on the magwell so it can't accept pmags is lame sauce. I have to say, it's a really nice can. I was told it's a heavy *bramston pickle*, I disagree, as it feels very similar to my M4-2000, but the sound it produces is lower pitched. After about 2000 rounds I dunk the triple taps in a brake cleaning solution overnight to clean the inside deposits of carbon/copper out. So when I took it to the FFL it was damn near spotless, this is what it looked like after 150 rounds suppressed: Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 You guys might like this: That's a pattern generator over the PEQ-15s IR designator. It's set up to be equal size to a human head at 300m. So it's about 4 inches at 100yds. It also prevents me from ruining the standard ND filter it comes with. But can you imagine that red laser sweeping across your house at night?! Link to post Share on other sites
greensta Posted November 2, 2009 Report Share Posted November 2, 2009 Am i right in thinking there is more than just the one pattern that the peq can produce? if so coud we get a pic of each? you know, for education purposes?? Link to post Share on other sites
Hispeed1 Posted November 2, 2009 Report Share Posted November 2, 2009 Thanks for the vids Ttl. Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 Am i right in thinking there is more than just the one pattern that the peq can produce? if so coud we get a pic of each? you know, for education purposes?? I don't know if I can do a photo of each, I try not to swap those around because the bands can be a little fragile. But there's 5 total: -Triangle -Square -Circle -T-shape -X-shape (or '+' depending on orientation) Link to post Share on other sites
greensta Posted November 2, 2009 Report Share Posted November 2, 2009 oh so the caps filter the laser? i thought there was a setting for each if that makes sense, kind of like a *in built laser shape*. The different shapes are intended for different fire teams, units and shooters right? thanks anyways titleist. Link to post Share on other sites
Titleist Posted November 2, 2009 Report Share Posted November 2, 2009 oh so the caps filter the laser? i thought there was a setting for each if that makes sense, kind of like a *in built laser shape*. The different shapes are intended for different fire teams, units and shooters right? thanks anyways titleist. It's the cap that does the reticule. It's an attempt to make it so squad lasers can be separated out from other squads. How useful that is remains to be seen. I hear the results are 'meh' in that regard. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.