NonEx Posted February 25, 2014 Report Share Posted February 25, 2014 (edited) Posted in the SA Glock 17 news thread for you. This is for the Glock 19 but same advice applies. In my Glock 19 I use a TM 1911 150% spring. Edited February 25, 2014 by NonEx Quote Link to post Share on other sites
Finbarqs Posted February 25, 2014 Report Share Posted February 25, 2014 I use the guarder enhanced recoil springguide for kj g19, works pretty good, http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=634_637&products_id=15002 Is that the entire spring and spring guide? Or is it just the spring? Or just the guide? Sometimes, you can never know with these Asian countries... They're a bit deceptive at times on what they are trying to sell you... Yes I'm asian and I just "outted" my own people... Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
Dj_komodo Posted February 25, 2014 Report Share Posted February 25, 2014 Haha... It's both spring and spring guide. NonEx, I should try the TM spring, is it just the spring? For the original spring guide is made if plastic, maybe the RS is made of it too, I don't know. The guarder one is made of metal Quote Link to post Share on other sites
NonEx Posted February 25, 2014 Report Share Posted February 25, 2014 I got the Guarder TM 1911 150% pack with recoil spring and hammer spring. Just used the recoil spring. You remove the spring cups on the stock Stark guide rod, remove both springs, put in the TM 1911 spring and one pair of spring cups on top. RS guide rod is plastic as well. Quote Link to post Share on other sites
Finbarqs Posted February 25, 2014 Report Share Posted February 25, 2014 http://www.evike.com/products/27211/ will that work? or what about this http://www.evike.com/products/25903/ Quote Link to post Share on other sites
NonEx Posted February 25, 2014 Report Share Posted February 25, 2014 First of all do you have the Glock 17 or Glock 19, or both? Which one are you asking about? Second, do you just want the spring or the whole assembly? Quote Link to post Share on other sites
Finbarqs Posted February 25, 2014 Report Share Posted February 25, 2014 I have a G17 Match, and I guess I'll take the entire assembly... Easy swap, plus I'm not a fan of the plastic guide they have... Quote Link to post Share on other sites
emp3ror86 Posted February 26, 2014 Report Share Posted February 26, 2014 (edited) Have you guys seen the new premium SA Glocks at WGC? CNCed steel slide & barrel and CO2 magazines. 17 and 19 for 290 USD. Edit: pictures are up at WGC' facebook page. Looks good. Edited February 26, 2014 by emp3ror86 1 Quote Link to post Share on other sites
Finbarqs Posted February 26, 2014 Report Share Posted February 26, 2014 well hopefully all I need is the steel slide now... but i'll be in for a full pistol for g19! ugly co2 mag though where'd you see 290? Quote Link to post Share on other sites
Finbarqs Posted February 26, 2014 Report Share Posted February 26, 2014 So will those parts from evike work? Actually, I'm going to bring my gun to evike, and just try it out... the only thing I can loose is time! Quote Link to post Share on other sites
NonEx Posted February 26, 2014 Report Share Posted February 26, 2014 (edited) Hellz yeah. Definately getting one of those steel slide Glock 19s! FB album : https://www.facebook.com/wgchk/media_set?set=a.276370642521411.1073741829.100004454315497&type=1 Product listings: http://www.wgcshop.com/wgc2008/main/content_page.php?search=category&rs=Stark%20Arms%20Gas%20Pistols&catid=7&cat=704 Glock 19 specs. Release on end of Feb 2014CNC steel slideCNC steel outer barrelPrecision inner barrelCo2 MagazineGun cases Length: 175mmWeight:890gCapacity:20rdsBarrel Length:85mmMuzzle Velocity:90m/sMore information coming soon Edited February 26, 2014 by NonEx Quote Link to post Share on other sites
jammie654 Posted February 26, 2014 Report Share Posted February 26, 2014 Nice! Shall be ordering up a steel slide and a couple of CO2 mags for my G19! Quote Link to post Share on other sites
NonEx Posted February 26, 2014 Report Share Posted February 26, 2014 No word on the steel slides being available seperately from what I saw? Quote Link to post Share on other sites
Finbarqs Posted February 27, 2014 Report Share Posted February 27, 2014 wish they could make a flush plate CO2 mag! or does that make it look like another type of glock mag? Sorry new to the glock world. Quote Link to post Share on other sites
TheFull9 Posted February 27, 2014 Report Share Posted February 27, 2014 That's the +2 base plate they've replicated. My Stark 17 came with one along with the bog standard plate (pictures back a couple of pages) that doesn't actually do anything functionally, but it's a great manipulation aid for reloading. Quote Link to post Share on other sites
emp3ror86 Posted February 27, 2014 Report Share Posted February 27, 2014 WE could make a CO2 magazine without the +2 base plate. Quote Link to post Share on other sites
Finbarqs Posted February 27, 2014 Report Share Posted February 27, 2014 (edited) will WE mags work? also will G17 mags fit in G19's and vice versa? this might be a time that I may need to sell my G17, even though I just got it yesterday lol. Edited February 27, 2014 by Finbarqs Quote Link to post Share on other sites
emp3ror86 Posted February 27, 2014 Report Share Posted February 27, 2014 Those WE magazines work in my TM G17, and those are supplied with that extender to be used in a 19. I built my TM to be CO2 compatible, spent at least $600 onto the project so far, and it still got an aluminium slide and not compatible with RS parts. I have been waiting for 6 months to Guns Modiy to restock their tritium sights. Now seeing that steel slided SA one for half the price I already spent, my mind hurts a bit. I hate airsoft. I want to punch that dude who got me into it into the face. Hard. Quote Link to post Share on other sites
NonEx Posted February 27, 2014 Report Share Posted February 27, 2014 I asked KIC Taiwan if they heard anything about this and they said no. Wondering if this is WGC exclusive product? Quote Link to post Share on other sites
jammie654 Posted February 27, 2014 Report Share Posted February 27, 2014 No word on the steel slides being available seperately from what I saw? Just order one from the parts list..... Quote Link to post Share on other sites
NonEx Posted February 27, 2014 Report Share Posted February 27, 2014 And where is that available exactly? Quote Link to post Share on other sites
jammie654 Posted February 27, 2014 Report Share Posted February 27, 2014 WGC will have it once it has been released Quote Link to post Share on other sites
NonEx Posted February 28, 2014 Report Share Posted February 28, 2014 OK, we shall see. Quote Link to post Share on other sites
Finbarqs Posted February 28, 2014 Report Share Posted February 28, 2014 WGC's reply to me when asked about selling slide separately: Dear customerI think the CNC Slide will not temporarily to sell , really sorryabout that , welcome to keep visit our webpage to get the item news .Thank you very much, and hope we can keep the service for you Besides the poor english, I think he's trying to say there will not be any extra steel slides to sell separately... Quote Link to post Share on other sites
Nath Posted February 28, 2014 Report Share Posted February 28, 2014 (edited) Any news if Co2 version will have trades on the slide? Edited February 28, 2014 by Nath Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.