Jump to content

Brigg

Forum Regular
  • Content Count

    1,050
  • Joined

  • Last visited

  • Days Won

    27

Everything posted by Brigg

  1. Brigg

    GBB psg1

    Really surprising that WE didnt have one of these ready to go when they released the g3. But unfortunately, as much as i want a psg1, I will never buy a gbb from vfc again after the mp5 that didnt work and could not be fixed for any reason. Just say no to VFC gbbs.
  2. I see youre new, so it might be somewhat confusing or such. But, this section of the forum is for reviews of products. For projects and technical stuff you'll want to post in the "Technical discussion" area, in "project suggestions". Otherwise, youre unlikely to get many responses in this section.
  3. I dont have a long enough range to really test a hopup, but it has a tiiiiiiiny screw on the top that adjusts the hopup. Nearly the same as on the ct25. So yes, from what i can tell, it is adjustable, its just kind of... Wierd.
  4. Interesting you mention that because the last shot on either of my mags wont cause any blowback at all, it just kinda farts out the bb. I think it may just be that the valve delayer is busted. You wouldnt happen to know what part number it is do you? Im looking at the parts diagram on KYAirsoft and im not sure quite which one it is. A19 maybe? I also have a similar issue on my we m84 where the the gun light strikes and I'd be willling to bet its more or less the same reason.
  5. Has anyone experienced theirs having light strikes or weak blowback? Mine seems to get like, one good shot, followed by sort of... Bleh shots. Sometimes it doesnt even cycle the slide. From my initial inspection i dont see anything obviously broken or missing though, so im not sure.
  6. I got mine unexpectedly on the doorstep this morning, so, i spent a couple hours fiddling with it and did pit my initial impressions on the pistols subforum. Long story short; Its 'fine'. I'm neither disappointed nor blown away. Its pretty average in most respects and time will tell if its long term reliable, but out of the box, there were no glaring problems or malfunctions.
  7. So after a nearly month long wait, i was greeted this morning by a package on my doorstep. Seems it was delivered a bit early, on a sunday no less. I could tell immediately on opening the box why it had spent so long in the HKPost. It had clearly spent quite some time going through all the red tape. After removing all the tape and glue residue, Ive had some time to mess around with it today. And have my initial impressions after a couple hours of emptying mags. Overall my impressions are 'Meh'. Its not great, its not awful. Its about what I would expect for a ~100 USD gun. It s
  8. Mine is supposedly arriving this coming tuesday, a couple days shy of a full month since ordering it. I had even paid for the $63 express shipping like an idiot, but they didn't ship the thing until 2 weeks after i placed the order. And they backordered the magazines, even though the site continues to claim they have them in stock.. Ive really gotta say, if youre excited for a new product thats just been released, never order it from KY. Just wait until a site like redwolf have it in stock and you'll get it much faster. Very disappointed.
  9. Seems like both had bbu problems, improperly installed maybe? Slides tend to jam like that when the loading arm breaks off the nozzle. And the mag not locking in seems like it was hitting the bbu. Just my thoughts though.
  10. Ive been able to get it a lot more efficient, but, im still working on getting it 'perfect'. In the meantime though, it can clear a short mag no problem now, so heres a video of it looking weird with a normal hicapa mag in it.
  11. Well, the release valve is in the magazine, i kinda dont want to mess with those.
  12. The only real issue im still ttying to iron out is the gas consumption. It is quite a gas hog, and on auto it cant quite get though a full magazine. it'll get like 40 shots before it cant quite reach the sear engagement again, and you can see the clouds of gas billowing out in the video if you fire more then a very short burst. Im not really sure whats causing it, though my suspicion is that the valve delay is a bit too long, and its keeping the valve open even after the loading nozzle is no long aligned with the magazine. Unfortunately without fairly substantial changes to the rec
  13. I havent gotten any shipping notification email yet. Im hoping they didnt screw me like they did when the WE thompson came out. I didnt get mine until nearly two months later and I could have had it from any other retailer faster in that time.
  14. I ordered one of the standard black ones from KY during the brief period they were in stock, about two days ago. So hopefully i should have it reasonably soon, and hopefully it isnt garbage.
  15. i figured i should show this here since its been a while. This is one of my current projects, a gas blowback s&w76. So far its mostly done, but i need to get the has efficiency to be better on auto, and i need to have sling bars tig welded on. Its a fairly even mix of machined and 3d printed parts. I mostly used 3d printing for parts that would be very complicated to machine (like the loading nozzle, the magwell, etc). this way if i wanted to make a second one, it wouldnt be nearly as hard as starting from scratch
  16. Brigg

    WE New SMG ?

    Its not a Glock mag but its made to look like one. Its got a flatter top angle and different valve placement. *Probably* a catch cutout in the back side as well. too bad they didn't go with an uzi style mag instead. And then go ahead and make an uzi too.
  17. I have some doubts as to how much more efficient ghk's idea of using a rifle style bbu will be. Mostly because I did that same thing a few years back with my own pistol design, which has a thread in the projects forum here. (KPS-01 if anyone cares) I didn't do it on my design because it was super efficient, it was just easier to machine. And I suspect thats pretty much why ghk are doing it too. (Granted my design did have a separate block in the back because I wanted to use rectangle tubing). It did turn out to be a bit more hard kicking then the kwa 1911 that it used a magazine from, but
  18. .... Why does it take glock mags?
  19. I wonder if they'll make them compatible with kwc mags, or if they're going to design their own proprietary mag.
  20. Interesting in that the shells look a lot like the ones used for the wingun Nagant 1895. Also interesting in that it seems like they'll go far and wide to make models that aren't normal S&W style revolvers.
  21. The checkering didnt come out perfect, but for my second attempt i think theyre great. The gunline beginner's set i bought only came with four tools and theyre not enough to do anything too complicated. So the borders are a bit gnarly, i had to do the corners with a sharp screwdriver. I might pick up a couple additional tools soon.
  22. Here is my Dan Wesson 715 with my own hand made wooden grips, I patterned them like a s&w m29 like some of the older dan wesson grips. Theyre made of common american walnut, and are the second time ive tried checkering by hand.
  23. Finally finished the OA93. Woo. I even did another video to show it working.
  24. Its not quite finished yet, but I'm doing a WE based Olympic Arms OA93. Once i have it all done i think i'll make a proper thread for it, but i think its looking pretty good so far. Alot of planning, machining and testing went it to making it work properly..
  25. Looks like they copied the buffer out of the ghk ak's. Probably not a bad idea. I imagine it saves the pot metal parts from shattering.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.