ForgottenValor1 Posted April 27, 2005 Report Share Posted April 27, 2005 OK, here what I have planned to make my KSC M11A1 a Primary weapon... G&P M11A1 Ingram Metal Lower Receiver G&P M11A1 Metal Upper Receiver & Magnesium Bolt Hidakaya (BeMax) Recoil 150% Spring for KSC Ingram M11 KM TN KSC M11A1 6.04mm Ingram Inner Barrel KSC Ingram M11A1 Short Magazine x2 KSC Ingram M11A1 Long Magazine x5 Tanio Koba Silencer For KSC Ingram M11A1 G&P CQB Tactical Rail Adaptor For KSC Ingram M11A1 G&P 6P RIS Mounted Flashlight Red Dot Sight Mosquito Molds Mini Launcher Set Classic Army 165 Rounds BB Shower x2 Sling Yes It would be very expensive for a SMG that only shoots around 300 fps but! It is also the only airsoft GBB that operates exactly like the real thing, it has the last shot bolt stop, field-strip ability, and no hose hangin out of the grip or stock. I have seen the Maruzen MP5K, it has a bad wrap and limited upgrades with no bolt stop... The YE MP5, no bolt stop, rare mags and the hose thing... then the SP M16, no working bolt release or stop!!! no working forward assist and the hose yet again!!!! If anyone has an idea of what else to add, let me know, thanks. One more thing, does anyone know if the G&P m203 would fit on the CQB lower rail of the m11??? Link to post Share on other sites
Tinkerton Posted April 28, 2005 Report Share Posted April 28, 2005 do you have any idea how big the M203 is? do you have any idea how small the M11 is? its a no, without *Serious* modification/bodging. also, the mini launcher (iirc) takes 20mm chells, not the big 40mm ones. Link to post Share on other sites
Guges Mk3 Posted April 28, 2005 Report Share Posted April 28, 2005 The MM Mini-Launcher does use 40mm shells. Link to post Share on other sites
Antagon Posted April 28, 2005 Report Share Posted April 28, 2005 Man, you make the SP sound worse than it is. No forward assist or assisting forward! No bolt release, stop, or hold back! And it still has the tube, hose, AND tank! Link to post Share on other sites
Marlowe Posted April 28, 2005 Report Share Posted April 28, 2005 There's a special place in hell reserved for you and this modification... Link to post Share on other sites
W.K.Shuridys Posted April 28, 2005 Report Share Posted April 28, 2005 The real MP5K has no bolt hold open either. The Maruzen is fully accurate in that respect. And shame on you for contemplating the desecration a fine GBB like that. Link to post Share on other sites
BakaBox Posted April 28, 2005 Report Share Posted April 28, 2005 Just get the KWC Mini Uzi with alot of magazines. Link to post Share on other sites
Tinkerton Posted April 28, 2005 Report Share Posted April 28, 2005 my bad guges. anyway, M11 = small and nice. M203 = big and nice. M11+ M203 = BIG and Fugly! Link to post Share on other sites
HardCoil Posted April 28, 2005 Report Share Posted April 28, 2005 The real MP5K has no bolt hold open either. The Maruzen is fully accurate in that respect. The real MP5K fires from a closed bolt, the maruzen fires from an open. That's even worse in my opinion FV: Where are you going to put that launcher? I really can't get my head around it If you really want a GBB as a main weapon I'd go with a Steyr TMP with an extended barrel in a suppressor. Link to post Share on other sites
Marlowe Posted April 29, 2005 Report Share Posted April 29, 2005 Now that I've recovered from the initial rolling around on the floor laughing at the very thought of attempting to add a moscart system of ANY form onto my m11, let alone a m203, I think I must really ask: In all seriousness, is this a wind up? Link to post Share on other sites
sp00n Posted April 29, 2005 Report Share Posted April 29, 2005 No, just, no. Link to post Share on other sites
futbolpunk Posted April 29, 2005 Report Share Posted April 29, 2005 DON'T LISTEN TO 'EM! I'm all for doing what everyone else tells you is horrible, wrong, and that you'll go to hell for. I'm tired of seeing people shoot down ideas people have just because it hasn't been done. DO IT! I think it will be one of the best CQB gun ever made. Being able to put that much money, time, and effort into a rather unloved (by most) gun is truly awesome. Rock on. Link to post Share on other sites
Catchv22 Posted April 29, 2005 Report Share Posted April 29, 2005 Actually the M203 on an MAC11 has been done before, and it's ugly. There's a reason why people like to shoot down the same ideas over and over again. No matter how many times you jump off a cliff, you're not going to fly. Link to post Share on other sites
sp00n Posted April 29, 2005 Report Share Posted April 29, 2005 Actually the M203 on an MAC11 has been done before, and it's ugly. There's a reason why people like to shoot down the same ideas over and over again. No matter how many times you jump off a cliff, you're not going to fly. <{POST_SNAPBACK}> this man is the truth. Link to post Share on other sites
futbolpunk Posted April 29, 2005 Report Share Posted April 29, 2005 I'm still sick of everyone trying to convince a guy not to do a project just because THEY don't like it. It's even that they say "I, personally, do not like how the finished result is." Instead they say things like "There's a special place in hell reserved for you and this modification," and "No, just, no." Rude, ###### off people has got to be by FAR the worst part about these forums (perhaps the only bad part). It's sad to see such hostility in a place that is supposed to be creative, helpful, and nice. Link to post Share on other sites
sp00n Posted April 29, 2005 Report Share Posted April 29, 2005 I'm still sick of everyone trying to convince a guy not to do a project just because THEY don't like it. It's even that they say "I, personally, do not like how the finished result is." Instead they say things like "There's a special place in hell reserved for you and this modification," and "No, just, no." Rude, ###### off people has got to be by FAR the worst part about these forums (perhaps the only bad part). It's sad to see such hostility in a place that is supposed to be creative, helpful, and nice. <{POST_SNAPBACK}> Hey if I duct tape a large log to your face, would that better illustrate our point? The M203 is nearly twice as long as a Mac11, they just dont go together. Edit: The more I think about it, the less I think it would even be possible with the RIS system he has listed. Unless he had it upside down on the top rail or on one of the side rails, which would make it EXTREMELY awkward to handle. The bottom rail looks to short to be able to grab the M203 rail clamps. Link to post Share on other sites
futbolpunk Posted April 29, 2005 Report Share Posted April 29, 2005 The MM Mini-Launcher does use 40mm shells. <{POST_SNAPBACK}> Hence the prior suggestion made by Guges. Hey, if I say rude and pointless things to you, will you listen to me? Link to post Share on other sites
sp00n Posted April 29, 2005 Report Share Posted April 29, 2005 Hence the prior suggestion made by Guges. If I say rude and pointless things to you, will you listen to me? <{POST_SNAPBACK}> Notice how I havent said squat about a mini launcher. I expressed my opinion on an open forum and *gasp* it differed from yours. Get the hell over it. Now if this guy wants to go bolting grenade launchers to a weapon that is no more than 8 inches long, he can go right ahead and do it. But as I said above, I doubt he would be able to mount the M203 with the RIS he has picked out. Link to post Share on other sites
Catchv22 Posted April 29, 2005 Report Share Posted April 29, 2005 If I recall correctly, I haven't said the Mini Launcher is a bad idea. We're all just saying it would be insane to try to bolt an M203 to a tiny machine pistol like the MAC11. Link to post Share on other sites
futbolpunk Posted April 29, 2005 Report Share Posted April 29, 2005 (sp00n) Fair enough, but you could still type at least HALF of your posts with some class instead of with your usual cold and bitterness. (Catch) I didn't imply that you bashed the mini-laucher idea, did I? I definately think a small launcher would look much better than a standard M203. Just make sure the color matches the rest of the gun, lol. Link to post Share on other sites
staticzero Posted April 29, 2005 Report Share Posted April 29, 2005 FWIW, there is a guy that comes out to the field that I play at that has a mini-launcher mounted on his Ingram. I think that while unrealistic, it makes for a great breaching/room clearing weapon (especially in conjunction with the other mods you speak of. The KSC/KWA Ingram is a great gun stock, and if you get the FPS up some and improve the accuracy, it will easily stand up to an AEG in terms of performance. Plus, the fun factor would be through the roof. Just make sure you have plenty of mags, or leave it on semi unless the situation dictates otherwise. In addition to the mods you have listed, consider modifying your mag valves to be higher flowing. This may get you higher FPS at the expense of higher gas usage. Guide: http://www.unconventional-airsoft.com/proj...-conversion.php Also remember that real steel MAC-11 (.380 caliber) parts will fit. That opens up a whole lot of other options for parts, including different stock options. A quick google search should find a mess of stuff to choose from. Good luck! Link to post Share on other sites
ForgottenValor1 Posted April 29, 2005 Author Report Share Posted April 29, 2005 I dont remember asking any one of you *fruitcage* people how it would look!!! I asked if it would fly. The MP5K real steel does have a stop after the last bullet dumbshit, how else would it fire? it operates on a weapon gas system, not a internally stored gas... and yes the SP sucks *albatross*, ive shot one more than once... The M11A1 is the only!!!! gun to operate like the real steel, ad-*fruitcage*-mit it, and its an SMG designed for military use, it was never adopted because of its uncontrollability in such a high rate of fire. If I ever saw you people on the field, I would woop ur *albatross* with this "ugly" gun, and have you begging to suck my ######!!! P.S. Hoorahhhhh futbolpunk... Link to post Share on other sites
DarkLite Posted April 29, 2005 Report Share Posted April 29, 2005 I dont remember asking any one of you *fruitcage* people how it would look!!! I asked if it would fly. The MP5K real steel does have a stop after the last bullet dumbshit, how else would it fire? it operates on a weapon gas system, not a internally stored gas... and yes the SP sucks *albatross*, ive shot one more than once... The M11A1 is the only!!!! gun to operate like the real steel, ad-*fruitcage*-mit it, and its an SMG designed for military use, it was never adopted because of its uncontrollability in such a high rate of fire. If I ever saw you people on the field, I would woop ur *albatross* with this "ugly" gun, and have you begging to suck my ######!!! P.S. Hoorahhhhh futbolpunk... <{POST_SNAPBACK}> SIgh. The MP5k DOES NOT have a bolt stop. The bolt goes forward after the last shot on an empty chamber, and the user must bolt it manually (or do the H&K slap) to load another round. There were a few mp5s (no mp5ks) made with a bolt stop, but they're VERY rare and methinks only the FBI use them. Now, Calm down, stop being a cock and type properly. Link to post Share on other sites
screamin_weasel Posted April 29, 2005 Report Share Posted April 29, 2005 on a 'technical' note, if you keep the silencer on all the time, you could run a longer barrel thorugh it, probably about twice as long as the original, greatly improving the accuracy. Link to post Share on other sites
Marlowe Posted April 29, 2005 Report Share Posted April 29, 2005 Forgotten: if you'd bothered to read what I said, you'd see that I own one and love it. Yes, the gun is very nice. However I think you're a shocking hypocrite to harp on about its realism, and then want to mount a m203 on it. If you're surprised that people are reacting in this way to someone who's harping on about their love of a weapon's realism, and then wanting to attempt the most unrealistic modification possible, then you clearly haven't put too great a deal of thought into your conversion. Regardless of that, all the best with the modification if you attempt to go through with it. I'm sure you'll have much fun with it. If you want a m11, great. I love them, as do many who own them, and I'm sure you'll have loads of fun with it. Just don't come on these forums throwing around poorly considered comments, and expect people to ever give you an ounce of respect. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.