Fruitpastile Posted July 19, 2009 Report Share Posted July 19, 2009 Hi guys n gals, I most likely posting in the wrong section (doh) , but since it's my first post on here, newb department seemed quite apt. As per title, i've seen them on the web, im looking for a tommy gun, the twin handled drum magzined version - chicago typewriter stylee, not a thompson. Only place i've i've found them so far is in the USA by Cyma, but the yanks don't wanna send anything over the pond to me. Any ideas folks? Thanks in advance FP Link to post Share on other sites
Walton_County_Firefighter Posted July 19, 2009 Report Share Posted July 19, 2009 The only gun that fits that description is a springer by cybergun. You can buy conversion kits for a cyma or TM aeg. Link to post Share on other sites
dannyboy Posted July 19, 2009 Report Share Posted July 19, 2009 http://www.gunnerairsoft.com/catalog/produ...roducts_id=1497 Bolt aint right, but it's pretty much all there is atm, excluding the *suitcasey* springer. As far as I know, the 1928 listed on kapowwe hasn't shown up anywhere else yet, and that doesn't have the right bolt either, so. Link to post Share on other sites
Spencerman Posted July 19, 2009 Report Share Posted July 19, 2009 The Thompson 1928 with cutts compensator, ribbed barrel, vertical foregrip and drum magazine will be out here in the UK in about a weeks time, roughly. It does however have the wrong bolt, as has been mentioned, it has the same body as the M1A1, but it is all we are going to get for the time being. Airsoft Armouries should be getting them. Link to post Share on other sites
sgt.kicker Posted July 19, 2009 Report Share Posted July 19, 2009 If you want an AEG Tommy Gun, tough luck buddy. No one makes one. The best you can do (like those mentioned above) is to get the Cyma/Cybergun "M1928." I put that in quotes because it is, at best, a cross between the M1928 Tommy and the M1A1. It's got the M1928's compensator, front grip, ribbed outer barrel, and rear sights. But it's got the M1A1's thinner upper receiver, bolt, stock, and (I believe) selector switches. Link to post Share on other sites
Unit 318 Posted July 19, 2009 Report Share Posted July 19, 2009 http://airsoftatlanta.com/aeg.htm#1928 It exists guys, just need to find one where he can get it. Link to post Share on other sites
sgt.kicker Posted July 19, 2009 Report Share Posted July 19, 2009 That's the one I already mentioned: Not a true M1928 Tommy. Link to post Share on other sites
Unit 318 Posted July 19, 2009 Report Share Posted July 19, 2009 As close as you'll be getting in airsoft. Link to post Share on other sites
Fruitpastile Posted July 19, 2009 Author Report Share Posted July 19, 2009 Thats the kiddy! Thanks for the rapid reply guys, looks like i'll be badgering A2 in the next few weeks, i knew had seen it reviews on YouToob. Just feeling all nostalgic, fancied a bit of CQB in a pin strike 3 piece suit with a trilby! Fingers crossed they are coming to the UK. Link to post Share on other sites
Apex Posted July 19, 2009 Report Share Posted July 19, 2009 Thats the kiddy! Thanks for the rapid reply guys, looks like i'll be badgering A2 in the next few weeks, i knew had seen it reviews on YouToob. Just feeling all nostalgic, fancied a bit of CQB in a pin strike 3 piece suit with a trilby! Fingers crossed they are coming to the UK. Thats the springer version not the AEG version. Link to post Share on other sites
Kenworth W900 Posted July 19, 2009 Report Share Posted July 19, 2009 Well, personally I am not too worried about the stock being still M1A1 style, I prefer it to the M1928 style stock. On the other hand I am exceited that we Airsofters (more specifically us Brits) are finally being treated to a 'real' Tommy Gun, the military style was starting to get boring. Would be nice if the '28 receiver was in there too, but its a good start. @Spencerman: Do you have any further details on this release? How did you come about the info mate? Link to post Share on other sites
Apex Posted July 19, 2009 Report Share Posted July 19, 2009 Proper M1928 Body http://www.freewebs.com/azrmachine/1928woo...ckmetalbody.htm Link to post Share on other sites
harborne blue Posted July 19, 2009 Report Share Posted July 19, 2009 Proper M1928 Body http://www.freewebs.com/azrmachine/1928woo...ckmetalbody.htm I have this... The body is okay but needs some work to make it fit. Buy a dremel and some silicone lube at the same time. The AZR butt stock is pretty good in terms of shape and size but be prepared to dremel and fill to get the butt plate to fit. The AZR front end woodwork is, simply, bl88dy awful. When Gunners get the ACM back into stock, buy this. So, if you want and AEG Tommy, here's what it has cost me so far: CYMA M1A1 - £150 AZR m1928 body - e100 ACM front end - $75 AZR butt - £30 (from someone who gave up with it) Drum mag - $60 TOTAL - about £320 and a lot of work It's in bits at the moment - the AZR paintwork is laughably bad so it's undergoing the 'enamel gun metal applied by finger' technique, the butt is full of milliput and al the woodwork is undergoing multiple stain coats to get it to a uniform cover. Bloomin' WW2 airsoft - life's a lot simpler with multicam and an M4! Link to post Share on other sites
Spencerman Posted July 20, 2009 Report Share Posted July 20, 2009 I came by this information as I have one on order for myself (not from airsoft armouries, but I know they will be getting them) and I was told that they are expected either next week or the week after. I know that it isnt perfect, but at least it has most of the bits. I will probably mess about with it anyway, so I cannot wait. Link to post Share on other sites
harborne blue Posted July 27, 2009 Report Share Posted July 27, 2009 My m1928... http://www.ww2airsoft.org.uk/php/phpBB2/vi...f=13&t=8515 Link to post Share on other sites
greg Posted July 28, 2009 Report Share Posted July 28, 2009 A2, 'comming soon', £250, Cyber gun, Thompson 1928. Check out the picy on their webby's home page to see if it is 'Tommy' enough for ya. Greg. Link to post Share on other sites
Apex Posted July 28, 2009 Report Share Posted July 28, 2009 http://www.airsoftarmoury.co.uk/ - i don't see no 1928 listed...... Link to post Share on other sites
greg Posted July 28, 2009 Report Share Posted July 28, 2009 http://www.airsoftarmoury.co.uk/ - i don't see no 1928 listed...... Which is because you are blind or a bit impatient. Let the screen load up (it's a bit slow) & you'll see its the 4th gun advertised, between the WOC M4 & MK2 Sten. Greg. Link to post Share on other sites
Hakkon Posted July 28, 2009 Report Share Posted July 28, 2009 I don't see anything either. Link to post Share on other sites
RC-1138 Posted July 29, 2009 Report Share Posted July 29, 2009 http://airsoftatlanta.com/aeg.htm#1928 It exists guys, just need to find one where he can get it. http://www.kapowwe.com/Merchant2/merchant....mp;Store_Code=R Another site that carriers it. Got a buddy got it, said it was okay, not great, needs work for skirmishing, but it's fun to hold. Link to post Share on other sites
greg Posted July 29, 2009 Report Share Posted July 29, 2009 I don't see anything either. Oh dear. Do I really have to come round & hold your hand while we patiently wait for the home page to fully load & then scroll down, past the vcra blurb, Sennybridge ad, Marui 5-7, KSC MP7A1 GBB, & WOC M4 GBB, before finally beholding: "THOMPSON 1928, Cybergun, £249.99, coming soon", complete with drum mag picky! Greg. Link to post Share on other sites
ED-SKaR Posted July 29, 2009 Report Share Posted July 29, 2009 I can see it. looks like an m1a1 reciever.... with military trademarks... Link to post Share on other sites
Apex Posted July 29, 2009 Report Share Posted July 29, 2009 Seems FF won't render the page correctly but IE does.... Link to post Share on other sites
dannyboy Posted July 29, 2009 Report Share Posted July 29, 2009 http://www.airsoftarmoury.co.uk/product_in...roducts_id=3089 Would it really have been so hard to just link when mentioning they have it? Jeeze Link to post Share on other sites
Apex Posted July 29, 2009 Report Share Posted July 29, 2009 Slightly cheaper...... or is the front page with postage...... Wonder where the mags are, and 460rds, would have though that a drum was good for 600 ? Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.