Dustie Posted November 23, 2009 Report Share Posted November 23, 2009 Just surfing around and found some new GBB's on WA's site including a Infinity 'Tiki' also a new Para Ordnance Limited (it would be nice if they done a single stacker Para like the GI ) P. Link to post Share on other sites
Inspector Posted November 23, 2009 Report Share Posted November 23, 2009 It's about time on the tiki!!!! Link to post Share on other sites
ThaFlash Posted November 23, 2009 Report Share Posted November 23, 2009 I'm all over that TiKi! Link to post Share on other sites
Horsem4n Posted November 23, 2009 Report Share Posted November 23, 2009 is the current SCW3 system still horrible? Link to post Share on other sites
ThaFlash Posted November 23, 2009 Report Share Posted November 23, 2009 What's so bad about it? My SCW 1 and 2 guns are still rock solid so I never got around to the SCW 3 system. I think I may have the parts to retrofit in a SCW 2 lower... hopefully. Link to post Share on other sites
Horsem4n Posted November 24, 2009 Report Share Posted November 24, 2009 SCW 1 and 2 are much better than 3. 3 breaks down alot quicker than any other system in HQ GBBs today. you can see light strikes within a few months. the internals just cant handle green gas. it doesn't last much longer on 134a either. Link to post Share on other sites
L4byr1nth Posted November 24, 2009 Report Share Posted November 24, 2009 This is old news, I'm sure. Ben. Link to post Share on other sites
kilo_64 Posted November 24, 2009 Report Share Posted November 24, 2009 YES THE TIKI! FINALLY I was starting to worry about wtf im gonna do with 13 single stacks Link to post Share on other sites
Horsem4n Posted November 24, 2009 Report Share Posted November 24, 2009 This is old news, I'm sure. Ben. yes, im starting to vaguely remember this being announced a while ago. Link to post Share on other sites
aznriptide859 Posted January 27, 2010 Report Share Posted January 27, 2010 I know it's been released before, but it's out again (I think): http://redwolfairsoft.com/redwolf/airsoft/...il?prodID=28531 Looks kinda bland for $400. Needs better grips Link to post Share on other sites
davedawg123 Posted January 27, 2010 Report Share Posted January 27, 2010 $400+!?! It sure does look purdy dough. Really purdy. Link to post Share on other sites
orca Posted January 27, 2010 Report Share Posted January 27, 2010 Sry riptide. already posted here. Merged. Link to post Share on other sites
aznriptide859 Posted January 27, 2010 Report Share Posted January 27, 2010 ^Gotcha, thanks Link to post Share on other sites
davedawg123 Posted January 27, 2010 Report Share Posted January 27, 2010 SCW 1 and 2 are much better than 3. 3 breaks down alot quicker than any other system in HQ GBBs today. you can see light strikes within a few months. the internals just cant handle green gas. it doesn't last much longer on 134a either. What replacement internals are necessary to make it green gas compatible? Link to post Share on other sites
aznriptide859 Posted January 27, 2010 Report Share Posted January 27, 2010 ^I'd like to know too Link to post Share on other sites
ANDY_B Posted January 27, 2010 Report Share Posted January 27, 2010 Hybrid version has now been added to the WA site. I think this is the same gun that was in the Heroes TV programme. Link to post Share on other sites
DarkLite Posted January 27, 2010 Report Share Posted January 27, 2010 Sorry, did I miss something? What's so special about the Tiki? Link to post Share on other sites
amateurstuntman Posted January 27, 2010 Report Share Posted January 27, 2010 It's got funny looking sights and can be had in titanium? There wasn't a version available to airsofters that didn't cost a billion yen? It's slightly different? Airsofters will pick up anything shiny? Link to post Share on other sites
WhiteHawksan Posted January 27, 2010 Report Share Posted January 27, 2010 Airsofters will pick up anything shiny? That one Link to post Share on other sites
davedawg123 Posted January 27, 2010 Report Share Posted January 27, 2010 That one Correctamundo. Link to post Share on other sites
renegadecow Posted January 28, 2010 Report Share Posted January 28, 2010 What replacement internals are necessary to make it green gas compatible? The part which holds the valve striker to the hammer is a flimsy little roll pin. Given the harder recoil using green gas, the pin is easily damaged causing a misalignment of the striker. With that, the striker deflects against the valve when it hits rather then pushing it open all the way leading to light strikes and also damages the striker eventually. One way to fix it is to replace the pin with a solid one and file down deformities on the striker when it slips and hits part of the sub-frame. Link to post Share on other sites
BrooklynBorn Posted February 21, 2010 Report Share Posted February 21, 2010 Sorta relevant- Tiki is now available at eHobby. Not every WA product we see on their site actually sees the daylight that is major retailers. http://shop.ehobbyasia.com/pistols-gbb-smg...one-silver.html Link to post Share on other sites
Horsem4n Posted February 22, 2010 Report Share Posted February 22, 2010 The part which holds the valve striker to the hammer is a flimsy little roll pin. Given the harder recoil using green gas, the pin is easily damaged causing a misalignment of the striker. With that, the striker deflects against the valve when it hits rather then pushing it open all the way leading to light strikes and also damages the striker eventually. One way to fix it is to replace the pin with a solid one and file down deformities on the striker when it slips and hits part of the sub-frame. is that the only problem with the SCW3 design? just get an MBK and replace the roll pin and it should be good to go for as long as any other gas gun on green? Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.