Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 04/27/2019 in all areas

  1. 7 points
  2. 4 points
  3. 3 points
  4. 3 points
    Been liking the look of my 416 unsuppressed recently!
  5. 3 points
    So a long time ago I got to use an AK in Slovakia that had a really nice dust cover rail on. Note how it's nearly identical to the Texas Weapon System rail, except it has the original rear sight on. Since I own the Asura TWS clone, I thought maybe all I need to do is replace the "bridge" to do what the little rail does on top. ^Asura rail. Work in progress: Still need a bit of tweaking, the rear sight sits 1.5mm higher than the original position, so if I cared enough I would adjust the front sight up by the same amount. Gotta come up with a way to put a spring in there to keep good tension, and a few more fitment issues, after that it's ready to get printed in steel!
  6. 2 points
    TM please make a GBB version of this in the future. This thing just too adorable.
  7. 2 points
    A foolishly ambitious project, spoiler alert, doesn't work the way I'd like it to. It's a hop unit for airsoft Glock that shoots lasers instead of BBs. Basically like the "laser bullets" you get with real steel guns but for airsoft, with the blowback. It takes the pressure which is usually meant for the BB to push a switch to close the circuit of a laser diode where the inner barrel is usually positioned. Splits into two for assembly. Testing the plunger / button: Assembled, now tested in a gun with plenty of gas in gun. Predictably, with the recoil shaking the gun around (This is on a steel slide Glock with Volante BBU), the target dot isn't very useful, it creates a streak instead of a clean dot, here you can see a test with a nearly empty mag, where the very last shot does not cycle the gun, here you can see a clean useful dot. So that pretty much brings me to the end of this project as far as I'm prepared to go for now, oh well, was fun and learned a lot in the process.
  8. 2 points
    I mean it's not very friendly, but on the other hand, why make a big thing out it (the initial situation). *suitcase* happens.
  9. 2 points
    In case anyone is still interested, slow trickle of new stock available on their website now. It's a faint pulse but still alive nevertheless.
  10. 2 points
    "Hey Jim what's the best way to show off our new toys which specifically make the gunshot louder" "Compare it against a pistol that doesn't have the toy!" "Great idea. I can't figure out what's missing though." "How about music which makes it really *fruitcage* hard to hear the difference?" etc.
  11. 2 points
    Recently bought a TM recoil G36k from a nice chap on Prefired for a KSK build , progress so far .
  12. 2 points
    https://www.taiwangun.com/en/electric/cm-093-cyma?from=listing&campaign-id=19 https://www.taiwangun.com/en/electric/cm-093c-cyma?from=listing&campaign-id=19 There are actually many models variants coming out: http://www.020mag.com/revista/mobile/64/page/11?fb_comment_id=2479518658785767_2530913156979650 Most interestingly, there are AEGs available in Asia with engraved markings: http://blog.livedoor.jp/may0522-bellpapa/archives/53001563.html
  13. 2 points
    Got my setup complete, still haven't skrimed with it yet but damn it's satisfying to shoot.
  14. 2 points
    Sprayed the upper on my mk18 build. Can't wait to wear it in some..
  15. 1 point
    Iron Airsoft made a 20DS back in 2013 that I really wanted, but could never even remotely justify paying $700 for. It went into the "want but no way" pile along with CRW's steel Colt Detective Special ($1,550), and QRF's steel Colt Python ($1,650). I'd still like a Rhino, but I don't like WinGun much. I doubt I'd be prepared to pay what it would cost to build one of these to the standard I'd be prepared to buy it at... Which is probably the quintessential airsoft complaint.
  16. 1 point
    Yess more A1 and A2 receivers! Def somthing I need.
  17. 1 point
    Allright, installed the steel trigger parts: works like a charm! Way better trigger pull and no more burst issues on semi. Looking back I think my trigger was buggy from day one, as this is much much better. Newly created problem while testing: the nozzle broke.. One side/wing of part #109 gave out, making pin #117 slide out a bit, tearing out the pin-holes on #109 and #110. Have to replace the nozzle or maybe try a fix with new drilled holes and glue it together.
  18. 1 point
    Maybe he feels burdened with the gift of vision.
  19. 1 point
    Fantastic day out at the local field, weather was great (may have gotten sunburn a bit, was expecting dreary cloud cover and rain), and we had a great turnout. Rolled with a few players from a team called Combat Junkies, of which one was given use of a microgun all day and it was a blast. Bizon with extended barrel setup worked nicely, though hop was a bit wonky at times, still need to figure out settings for different weights. Cyma 40d worked as usual, though I was arcing many a shot to try and reach out to people. Only bummer was finding that the lonex chamber+flathop modded G&G green bucking combo I had put in the main kalash resulted in utter failure (talking 20 ft max with no hop applied), going to have to see if it the bucking or the chamber specifically, or else back to what it had before again. Other slightly humorous note: Sumrak pants so big on me now that even when tied tight they kept losing retention and sliding down around my knees. Think I might have lost too much weight lately. Already thinking of stuff to go sink a paycheck into again.
  20. 1 point
    Reading an article about Detective Inspector Terry Hopkins, Police Officer and Veteran who killed himself on Christmas Eve. And then being angry, angry that the government doesn't look after Veterans yet can push pay rises through (as well as their bloody expenses, isn't that what a salary is for?) and pay for this Brexit cluster*fruitcage* but won't help people it sent into harms way. Angry that people don't really seem to give a *suitcase* as it's not a celebrity, it's not smut, it's not apocalypse level events (though to the family I'm pretty sure it is). Angry that people feel their only solution is to take their own lives because we've stigmatised mental health ("committed suicide") and people don't think they can share their problems and theres not enough work being done by the government to get the message out.
  21. 1 point
    I'm not taking a poke at anyone, but it's pretty simple, if you don't come on.. that's one less person. Not saying anyone 'has' to use the site either you gotta do what you gotta do.
  22. 1 point
    Another little un. Had this Prime SIS Ultra kit in my projects stash for years, finally got around to gettin Negative Airsoft to build it for me on an old WA Kimber Parts gun I had. Was hardest WA Build he's ever done apparently, partly down to old knackered donor gun and partly down to kit. It loos lovely but design is very poor. Where the SIS is cut into slide the remaining metal is way to thin and infact can me flexed with finger tip. Anyway great job Luke thanks a lot. This one will be a safe queen I think. lol
  23. 1 point
    Nerpa vest with a condor belt thrown in by the seller. Spent quite some time tonight adjusting it to fit and still having moments of "Why do I eat so much!" Can report that the pouches will hold Bizon mags (came without dividers already so figured might as well test it). Whether or not they come flying out when moving at an angle has yet to be seen. Debating how to go about getting what are likely paintball stains out of it.
  24. 1 point
  25. 1 point
    Totally forgot to share my “raid gun”, though upgreaded with “tactical sling” for last weekend Nam themed night bridge boat raid and area reconnaissance. Sent from my iPhone using Tapatalk
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.