spaniard

Hello everyone, I want to put an ambi mag catch in my 416, but there is not a specific one for the Umarex/VFC. Is it compatible with the G&P/WA ones?. Did a quick search but got no results, so I thought this would be the best place to ask. Thanks in advance.

I have read that WE co2 mags gives good results with the Stark-Arms Glock 17 and 18, but you must replace the guide of the recoil sping.

The "Match Grade" comes with a steel barrel, and I guess it explains the extra weight. And you can find them at Airsoftglobal, but they are called "Strikearms" instead of "Stark-Arms" .

Tactical Tailor has one identical. http://www.tacticaltailor.com/dutybelt.aspx

I own the PX4 and the Samurai Edge, and both take a threaded adapte for a suppressor (the Samurai Edge even came with one in the box, cant remember about the PX4. So I think that all HK3P pistols have this feature.

MarsdenH, what holster are you using for the KP08?. I also have one and it doesn´t fit in the 1911 Serpa that I use for my KP05.

The trades on the frame of the PX4 are not engraved, they protude instead. My guess is that he carefully sanded them after painting.

The pictures (that were in fact from the closed bolt version) have disappeared, and it is stated to have NO MARKING. Wasn´t it supposed to be officially licensed by FN?.

If you finally go for them, count me in.

Lots of thanks for the info

RacingManiac, where did you found the Detonator sights?. I have searched everywhere and only found them in japanese stores that I am not able to buy from.

It is in fact, so you don´t need to worry about customs... but as the "polycarb" seems to be plain ABS (it feels exactly like the material used in the original Marui slide and frame) you must worry about impacts. Mine came with a couple dents that required filling with a little epoxi, sand and repaint.

Good point galactica, maybe I´m being a bit too paranoid.

I have just seen the KSC MP7A1 Taiwan version at Uncompany, and I wonder if this could be a re-brand of the KWA (that, by the way, seems to be out of stock everywhere). What do you think about it?. I´m thinking about ordering one and a reinforced loading nozzle, and if this is in fact the KWA one should order the specific version of the nozzle.

Maybe this has been answered before, but I have not been able to find an answer. Are the "trigger group" pieces of the WE SCAR (hammer, sear, trigger itself...) the same that the ones in the WE M4?

Sorry if this has been asked before, but I searched the thread and couldn't find an answer. Will the Bomber Airsoft DD Omega rail fit, or would it be necessary to modify or replace the barrel nut?.

How well do they fit in the G36 stanag adapters?. As they seem to have a tighter fit maybe they solve the wobble problem. By the way, not PMag related, but I have seen two adapters for the G36 (Private Parts and Battleaxe), and wonder if they are the same or if one of them is better than the other. Thanks.

What kind of pouch are you using for the bottle, Pulng?

usmcCorps, I assume you are running a li-po in the stock tube of the UBR. If so, I would like to know which one are you using.

A question for davester00. Was the UBR a direct replacement, or you had to modify the 556?

If the KA1 and the KSK rail are the same, this is not a KA1. The KSK is longer than the G36C and the optics carry handle, reaching the rear end of the receiver, while the one seems to have the same length that the G36C one. Also, the KSK is higher than the G36C rail, and although I can´t be sure because of the pic angle, this seems to be higher than the G36C but lower that the KSK (I´m not sure if I explain clearly enough. I´m sorry but guess that my English is not the best). By the way, could someone give a link to the SRC rail you are talking about?. I did some search but couldn´t find

I would be too even if it costs the same as the real steel. The real one is very hard to get, and it does not fit exactly the AEG (real handles are slightly shorter than replicas).

Looks like Bruger & Tomet to me

Thanks for the info Bella

Azngoonie, a question about the grip with the flashlight. I guess that you press the trigger to turn it temporally on, but is there a way to turn it constant on?