weekenny Posted February 19, 2012 Report Share Posted February 19, 2012 I think regular AEG inner barrels can be modified to suit. It's covered somewhere in this thread. Quote Link to post Share on other sites
Jackster802 Posted February 19, 2012 Report Share Posted February 19, 2012 I searched but didn't find anything. If you can find a guide that would be greatly appreciated Quote Link to post Share on other sites
PanteraTigris Posted February 20, 2012 Report Share Posted February 20, 2012 Weekenny, Â Nice post on those TDC. Thanks. Quote Link to post Share on other sites
Waffelcopter Posted February 22, 2012 Report Share Posted February 22, 2012 I got mine in today, and got it all dressed up with only a little dremmel work to get the rail on. Â Â I think it looks pretty good for spare parts that I had laying around. I'm gonna get a different rail and go for more of a DMR kind of look but for now I think this will work. Â Thanks for the stuff about the TDC mod, it doesn't look that hard at all, but I still think I'm going to try an R-Hop before I start drilling anything. Apparently HS5 makes a cold resistant R-Hop patch for use in GBBs. I know someone put one in a TM pistol and another person in a WE SCAR but I'm not sure how it worked out for them. Â I have had a few problems though, there's something wrong with my full auto. In semi everything works fine but when I try to shoot it in full it shoots 3-4 weak shots and then the bolt jams and a BB or two comes out of the ejection port. If I take out the mag 3 or so more BBs will fall out of the mag well and then after pulling the charging handle a few times and switching back to semi it will work again perfectly. Any idea what's up? It's a used Gen 1 fully upgraded with Cradle parts I bought off Ebay. I'd rather just fix it myself than deal with the hassle of sending it back unless it's something major. Quote Link to post Share on other sites
White_Rabbit Posted February 24, 2012 Report Share Posted February 24, 2012 just been offered one of these in next to new condition for very cheap, are there any 3rd party mags on the market yet or is it just the KJ works ones ? Quote Link to post Share on other sites
frogfish Posted February 24, 2012 Report Share Posted February 24, 2012 (edited) just KJ. There is some company in France, but I don't know how widely available they are. Â I wouldn't worry about the mags for anything outside of aesthetics and fit in some mag pouches. They are built like tanks. Edited February 24, 2012 by frogfish Quote Link to post Share on other sites
White_Rabbit Posted February 24, 2012 Report Share Posted February 24, 2012 Thanks for the reply, helpfull as always mate think ill order 2 or 3 mags next week Quote Link to post Share on other sites
White_Rabbit Posted February 24, 2012 Report Share Posted February 24, 2012 Thanks for the reply, helpfull as always mate think ill order 2 or 3 mags next week Quote Link to post Share on other sites
breakethebeat Posted February 25, 2012 Report Share Posted February 25, 2012 duuuuudes the france mags are ready for pre-order :D:D:D http://www.law-airsoft.com/en/main/produit/id_produit/719 Quote Link to post Share on other sites
frogfish Posted February 25, 2012 Report Share Posted February 25, 2012 (edited) but are they available for international sale? and $60 a pop....yikes.... Â I can't fit more than one mag in the 5.56 mag pouches on my LBT 1961g.... I ordered a 1961K so hopefully that will fix my problem in the long run. I made these to help in the short term, they are a little rough around the edges but I want to identify potential issues with the design before I invest too much more time into them. Â Â Edited February 25, 2012 by frogfish Quote Link to post Share on other sites
White_Rabbit Posted February 25, 2012 Report Share Posted February 25, 2012 well I bit the bullet and picke dit up today came with 2 mags in as new condition for £150 so Im happy now all I need to do is change out the standard m4 handguard and the stock and ill be happy for now.... Quote Link to post Share on other sites
White_Rabbit Posted February 25, 2012 Report Share Posted February 25, 2012 does this have a + or - thread on the flash hider? Quote Link to post Share on other sites
weekenny Posted February 25, 2012 Report Share Posted February 25, 2012 It's a reverse thread. If you remove the grub screw the hider will just slip off the threading is on a separate brass collar. Quote Link to post Share on other sites
White_Rabbit Posted February 25, 2012 Report Share Posted February 25, 2012 cheers dude, I have no tools at the moment as all my belongings have moved to ireland and Im staying at my parents untill I finish my contract at work gonna order the MOE front and stock to stick on it, ordered the NPAS kit from RA Tech this evening so hopefully ill be able to use this at STANTA at the end of march Quote Link to post Share on other sites
Hut73 Posted February 25, 2012 Report Share Posted February 25, 2012 cheers dude, I have no tools at the moment as all my belongings have moved to ireland and Im staying at my parents untill I finish my contract at work gonna order the MOE front and stock to stick on it, ordered the NPAS kit from RA Tech this evening so hopefully ill be able to use this at STANTA at the end of march  Ouch, shoulda held out on the npas till you read some of its reviews on here first. Supposedly they don't hold out very long. Quote Link to post Share on other sites
Jackster802 Posted February 26, 2012 Report Share Posted February 26, 2012 Yeah, the NPAS is complete garbage. Sorry bro. Quote Link to post Share on other sites
White_Rabbit Posted February 26, 2012 Report Share Posted February 26, 2012 ahhhhh ###### lol oh well my own fault for not asking first Quote Link to post Share on other sites
White_Rabbit Posted February 26, 2012 Report Share Posted February 26, 2012 Right then before I go off and waste any more of my hard earned money what if any upgrades or replacement parts should I invest in ? Quote Link to post Share on other sites
Jackster802 Posted February 26, 2012 Report Share Posted February 26, 2012 From my expirience, stay away from the falcon piston ring. It's smaller than the original one and drops your fps because of the air lost. Â I want to know what people have to say about the Falcon hop up bucking and 6.03 tightbore. Or what about the RA-Tech bucking and 6.03 tightbore. To anyone on this thread please let me know if you have used either of those. Quote Link to post Share on other sites
White_Rabbit Posted February 26, 2012 Report Share Posted February 26, 2012 roger that, seems im missing the loading tool for the mags, a normal speed loader doesnt seem to work dammm it lol Quote Link to post Share on other sites
Waffelcopter Posted February 26, 2012 Report Share Posted February 26, 2012 Does anyone know if it uses commercial or Milspec stocks? A quick search came up with people asking the question but no definitive answer Quote Link to post Share on other sites
Jackster802 Posted February 26, 2012 Report Share Posted February 26, 2012 It uses AEG stocks so whatever spec those are Quote Link to post Share on other sites
Hut73 Posted February 27, 2012 Report Share Posted February 27, 2012 It uses AEG stocks so whatever spec those are  Unfortunately aeg stocks vary as well. I can't remember offhand what I have on my kjw currently, but can find out when I get home by comparing w/ my real steel. Quote Link to post Share on other sites
frogfish Posted February 27, 2012 Report Share Posted February 27, 2012 Mine has a pts MOE stock on it so those are in spec. Quote Link to post Share on other sites
White_Rabbit Posted February 27, 2012 Report Share Posted February 27, 2012 Hmmmm dont suppose any of you guys have a spare mag loader they would like to sell me ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.