IAmHated Posted January 17, 2017 Report Share Posted January 17, 2017 does anyone have links to the well co2 mags on gunfire or taiwan gun so i can sign up for the email restock alert? or another source to buy them from? cheers Nath Quote Link to post Share on other sites
Batmause Posted January 18, 2017 Report Share Posted January 18, 2017 Today I made a new search to find new source for this magazine. I haven't any success, so wait for GFC/TWG restocking - and then we will fight for them... Quote Link to post Share on other sites
Batmause Posted January 18, 2017 Report Share Posted January 18, 2017 I checked the 'news' thread in this forum and I found this picture: CLICK. This a picture about SY's AK GBB magazine - looks like a WE-copy too. Maybe they will also producting WE AK copy in the future? 1 Quote Link to post Share on other sites
Batmause Posted February 24, 2017 Report Share Posted February 24, 2017 On stock again... http://www.taiwangun.com/products/search/language:eng?q=g74a 2 Quote Link to post Share on other sites
Dimitri MdP Posted February 24, 2017 Report Share Posted February 24, 2017 Totally offtopic... but I think it's worth sharing anyway: My WE AK fell off the second floor yesterday, directly into the concrete floor below. My sling release got engaged by some stuff in my chest rig. It survived. Without a scratch. Only the mag release lever pin got slightly out of position (quickly fixed by pushing the sucker back in), and the red dot sight got somewhat loose.. man, I love this thing. 1 Quote Link to post Share on other sites
NonEx Posted February 24, 2017 Report Share Posted February 24, 2017 Awesome! Quote Link to post Share on other sites
Batmause Posted March 1, 2017 Report Share Posted March 1, 2017 Here we come. OTS-14 replica based on WELL G74A. This is the first prototype. Now we're working on hard to start this conversion kit as mass-production - first time 5-10 pieces. If you want, I can show a test video about how it is working. 5 Quote Link to post Share on other sites
DarkLite Posted March 1, 2017 Report Share Posted March 1, 2017 Very nice! Quote Link to post Share on other sites
Batmause Posted March 3, 2017 Report Share Posted March 3, 2017 I got this video about how it works. 5 Quote Link to post Share on other sites
Dimitri MdP Posted March 3, 2017 Report Share Posted March 3, 2017 (edited) Gotta love that thing. Any estimation on the time and how much will you charge for them? Edited March 3, 2017 by Dimitri MdP Quote Link to post Share on other sites
Rainer1989 Posted March 3, 2017 Report Share Posted March 3, 2017 Wow, it's really nice, any chance of a GHK kit? Quote Link to post Share on other sites
Batmause Posted March 3, 2017 Report Share Posted March 3, 2017 (edited) Both of them, WE and GHK. Now the designer started to finishing the design. Price and estimation isn't known, yet. This prototype was made after 120 hard hours. This guy also made a Draco AK-variant too. Edited March 3, 2017 by Batmause 1 Quote Link to post Share on other sites
ST19AG_WGreymon Posted March 5, 2017 Report Share Posted March 5, 2017 I'd be in for a WE version. Quote Link to post Share on other sites
Rainer1989 Posted March 6, 2017 Report Share Posted March 6, 2017 GHK compatible, great!! Quote Link to post Share on other sites
DarkLite Posted March 6, 2017 Report Share Posted March 6, 2017 Depending on prices, I'd be up for a WE kit. 1 Quote Link to post Share on other sites
Batmause Posted March 15, 2017 Report Share Posted March 15, 2017 New front sight, we're working hard on the final design. 1 Quote Link to post Share on other sites
Batmause Posted April 4, 2017 Report Share Posted April 4, 2017 We finished the first two conversion kit and we know the price, it's 350€. exluded the shipping cost. The shipping cost is around $30 into the EU. It is drop-in fit with WE and WELL AKs74u but also compatible with GHK, VFC, E&L guns. You can also use this with V6 gearbox on AEGs which made with E&L- or VFC-standards. Here you can find few photo about the conversion kit. 1 Quote Link to post Share on other sites
Batmause Posted April 4, 2017 Report Share Posted April 4, 2017 We finished the first two conversion kit and we know the price, it's 350€. exluded the shipping cost. The shipping cost is around $30 into the EU. It is drop-in fit with WE and WELL AKs74u but also compatible with GHK, VFC, E&L guns. You can also use this with V6 gearbox on AEGs which made with E&L- or VFC-standards. Here you can find few photo about the conversion kit. No, 250€ - I made this mistake by phone, sorry. 2 Quote Link to post Share on other sites
Dimitri MdP Posted April 5, 2017 Report Share Posted April 5, 2017 That's a great price! And it looks quite good actually. My only concern is why did you go with that weird ventilated lower handguard / receiver instead of the much simple original design,---------------In other somewhat related news, Gunfire has restocked the Well clones. Did anyone tried fitting a whole nozzle assembly from WE on the Well guns? Quote Link to post Share on other sites
renegadecow Posted April 5, 2017 Report Share Posted April 5, 2017 I think it's a cut down AMD handguard. Easier to repurpose than build from scratch. Maybe 3D print plastic panels over it? Real one is plastic with metal sub structure. Hephaestus didn't bother and just made the whole thing metal. Quote Link to post Share on other sites
Batmause Posted April 6, 2017 Report Share Posted April 6, 2017 (edited) Yes, its is a modified AMD-65 handguard and we reinforced it. We choosed this handguard because the original design is to "labor-intensive". If you saw an Hepa OTS-14 then you know that the lower handguard has a big wooble. We use this solution to make a rock-solid gun. 3D-printing is expensive in this size. If we had own, good-quality printer then we made with 3D-printer - but currently we have only a FF FDM printer which isn't a good one. The print oftern warp or fallout from the printing bed. Basically I use that printer to check the size for the small parts - for example, I made an auto-sear holder for WE SCAR-H series. Currently I have only WELL but I tested a few parts from WE. For example, internal selector-switch. Next week I will order a few replacement parts from KYairsoft. I know that it is fully WE compatible with few modification - added one screw to fixing the rear movement on the FCG housing, steel hammer - sear - valve knocker, added plastic buffer, etc. You need to swap few springs (nozzle return spring, auto-sear spring), take it appart and reassembly (rivit wasn't fixed properly, add some epoxy to them) and replace the hopup rubber and the barrel. Edited April 6, 2017 by Batmause 1 Quote Link to post Share on other sites
Batmause Posted April 15, 2017 Report Share Posted April 15, 2017 (edited) New handguards. An OTs-14 like and a tactical version. Now the old, AMD-65-like is discontinued and we never made that version - except if somebody ask to do it. Edited April 15, 2017 by Batmause 1 Quote Link to post Share on other sites
Batmause Posted April 19, 2017 Report Share Posted April 19, 2017 On stock again, this time at asiaairsoft. They have AK74MN too. http://www.asiaairsoft.com/index_eproduct_view.php?products_id=9367 http://www.asiaairsoft.com/index_eproduct_view.php?products_id=9369 2 Quote Link to post Share on other sites
Dimitri MdP Posted April 19, 2017 Report Share Posted April 19, 2017 (edited) what what whaaaaaaaaat?!!!!Well done WE, the ultra-Chinese company that's cloning your system just made smarter model choices Edited April 19, 2017 by Dimitri MdP Quote Link to post Share on other sites
DarkLite Posted April 19, 2017 Report Share Posted April 19, 2017 ffffffffffffff I wish I had money 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.