sc0rp10n Posted October 29, 2008 Report Share Posted October 29, 2008 I might as well post in on this one....enjoy. Click the links to see pictures FULL FRONT REAR Link to post Share on other sites
Azulsky Posted October 30, 2008 Report Share Posted October 30, 2008 ESAPI side carrier clips on like this I have to say all that, in something not multicam, with the hydro bladder, would be about one of the hottest things this side of the RRV. Link to post Share on other sites
The Crunchy Bunny Posted October 30, 2008 Report Share Posted October 30, 2008 That does look cool. I think I may have to do that. But does the Side SAPI carrier make you have to cut some of your PALS loops to fit it or does it just slide on? Link to post Share on other sites
Pkekyo-Nor Posted October 31, 2008 Report Share Posted October 31, 2008 please read more than only the last post in the thread and you'll find my theorem about the 'satch cummberbund attachment system... Link to post Share on other sites
Shriven Posted October 31, 2008 Report Share Posted October 31, 2008 I think you're right Pkekyo.. if you look closely at the picture, you can actually see the cut out section of the clips pressing against the MOLLE webbing Link to post Share on other sites
SgtBojangles Posted October 31, 2008 Report Share Posted October 31, 2008 ^^^^^^^^^^ 43 mags? someone must be a bad shot 43? Try 26 airsoft and 19 real steel. (45 total) Bad shot? No, I just like having lots and lots of magazines. Actually, I really don't like going full auto unless people won't call their hits or if I am trying to make a crazy shot. In fact, I just adopted a broken Echo1 416 that came with two M16 highcaps. That makes for 28 M16 magazines, not counting my Dad's two or three high caps and one midcap. EDIT: Plus my team has a few other M16 variants, so if need be I can help them out with magazines. Each of my airsoft magazines has my initials on the bottom, so I know which ones are mine. Link to post Share on other sites
Azulsky Posted October 31, 2008 Report Share Posted October 31, 2008 It attaches to the rear plate section through a number(4 at least i would think) of malice clips. it attaches to the front of the vest because the female end of the buckle has a diagonal cut in it that lets you slide it over a PALS loop. That would be like the one you posted up Pyeko, but that is a huge gap on the cut, usually ive seen smaller cuts like you get on the grimlocks. Link to post Share on other sites
The Crunchy Bunny Posted November 1, 2008 Report Share Posted November 1, 2008 Oh I see. Sorry I'm so retarded. Link to post Share on other sites
jdizzle921 Posted November 2, 2008 Report Share Posted November 2, 2008 Here's My HSGI Wasatches. They are VERY comfortable as people have already said. Some of the best rig's I've everowned Link to post Share on other sites
yeatzee Posted November 11, 2008 Report Share Posted November 11, 2008 I've been contemplating getting a Gaurder weesatch, but I was just wondering A. Will it work fine with .308 mags B. Is it comfy with the shoulder pads? It doesn't look comfy with hordes of mags on the front but I've never tried one so yea. Link to post Share on other sites
The Crunchy Bunny Posted November 11, 2008 Report Share Posted November 11, 2008 My Guarder can hold one .308 mag per pouch. I've never tried it with shoulder pads but it should be pretty comfy. Without them it''s fine for me atleast. Link to post Share on other sites
Pkekyo-Nor Posted November 11, 2008 Report Share Posted November 11, 2008 if you buy a 'satch rig, replica or not, I highly recommend that you get yourself a set of real steel new generation HSGI shoulder pads like these, they are ALOT better than the old ones that come with most (if not all) replicas. They will make or break your 'satch experience for you. I haven't tried myself, but I'm fairly certain you could fit 7.62 mags in there, not sure wether or not you're able to close the velcros though. Either way, the 'satch series are fine even without the extra retention... (Until you use a few of your mags atleast) I hope you'll end up getting one, they're great plate carriers, enjoy! Link to post Share on other sites
Azulsky Posted November 11, 2008 Report Share Posted November 11, 2008 Think in past experience i had to put 1 g3 pouch in every other hole in my friends HSGI satch. m14 i think you can hold a few more since they arent quite as fat as the G3 mags. Yes shoulderpads are mandatory on these beasts. I would hardly say horde of mags have you seen how much the CIRAS people carry? Link to post Share on other sites
yeatzee Posted November 12, 2008 Report Share Posted November 12, 2008 Yea, well getting one is the plan And those shoulderpads you linked are the exact same ones I was planning on getting....... Finally where would be the best place to purchase the gauder weesatch?........Does the Gaurder weesatch come in CB or Tan? Thanks! Link to post Share on other sites
RedRaptor Posted November 12, 2008 Report Share Posted November 12, 2008 Question: Where do you guys stash your excess shoulder strap...straps? I just kinda wrap mine up and tape them down, but I'm sure there's a better way. Link to post Share on other sites
choffman10 Posted November 12, 2008 Report Share Posted November 12, 2008 Yea, well getting one is the plan And those shoulderpads you linked are the exact same ones I was planning on getting....... Finally where would be the best place to purchase the gauder weesatch?........Does the Gaurder weesatch come in CB or Tan? Thanks! /shameless plug I've got my Guarder Weesatch for sale along with the new HSGI shoulder pads. It's in ACU, but a quick shot of krylon can fix that. Link to post Share on other sites
yeatzee Posted November 12, 2008 Report Share Posted November 12, 2008 I'll think about it Edit: it took me forever to find someone selling the guarder weesatch.....BUT! http://airsoftglobal.com/product_info.php?products_id=4649 Now is this infact the guarder weesatch? It says tan but is it more CB...which is it? Link to post Share on other sites
Pkekyo-Nor Posted November 12, 2008 Report Share Posted November 12, 2008 RedRaptor: My excess shoulder straps I just doubled up across the shoulders again, the shoulder pads keeps them in place, never have come loose for the six months I had this beast Link to post Share on other sites
Pkekyo-Nor Posted November 12, 2008 Report Share Posted November 12, 2008 I even have camelbak tubes, a sling, and a lanyard running across my shoulder atm, and it's not problematic at all to shoulder my rifle. Also, I run LARGE replica SAPI plates. Bought 2nd hand, so I don't know the source of them... Link to post Share on other sites
RedRaptor Posted November 12, 2008 Report Share Posted November 12, 2008 RedRaptor: My excess shoulder straps I just doubled up across the shoulders again, the shoulder pads keeps them in place, never have come loose for the six months I had this beast Would you be able to get a picture of it? I think I tried that and ended up with a ton of leftover strap. Link to post Share on other sites
yeatzee Posted November 12, 2008 Report Share Posted November 12, 2008 http://airsoftglobal.com/product_info.php?products_id=4649 Alright guys I really need to know if this is infact the guarder weesatch and if the guarder weesatch comes in Tan or CB....thanks Link to post Share on other sites
RedRaptor Posted November 12, 2008 Report Share Posted November 12, 2008 Well, that's a Wasatch for sure - way more mag pouches than a Weesatch. Brand...I'd be pretty iffy on that one. Link to post Share on other sites
Pkekyo-Nor Posted November 12, 2008 Report Share Posted November 12, 2008 Well, I grabbed some photos, but as previously mentioned, the shoulders of my Wasatch are somewhat cluttered Hope you can get some useful information out of it anyways... Link to post Share on other sites
yeatzee Posted November 13, 2008 Report Share Posted November 13, 2008 Your right that is infact a wasatch... So first question is well does anyone know where I can get a guarder weesatch (do they make a wasatch?)? Second is Im a relatively small person (but im still growing) im at ~125 pounds and 5' 9'' or 5' 10'' so is the weesatch/wasatch going to work fine....esp with my .308 mags? Thanks! Link to post Share on other sites
RedRaptor Posted November 13, 2008 Report Share Posted November 13, 2008 Lemme put it this way: I'm a fat guy. Yeah, whatever. 240, 5'7". Loosened up a bit, the Weesatch fits me just fine, though I wish I had been able to get a Wasatch for extra mag capacity. But, I've seen people who are STICKS in comparison (140, 5'8"-ish) who have their Weesatches fitting them just as well. Long story short, it'll fit you, almost guaranteed. Wasatch, maybe not, but Weesatch? Definitely. As far as finding a Guarder one...just get a Pantac. Similar price, probably better quality too. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.