evansy Posted January 15, 2009 Report Share Posted January 15, 2009 Heres my latest SF/PMC inspired loadout. Sorry for the bad pics its just too overcast today. The belt kit has the same mag pouches as the chest rig atm so all together the kit carries 12 mags. Link to post Share on other sites
Azulsky Posted January 15, 2009 Report Share Posted January 15, 2009 Azulsky: I've run my 'satch with frankly an arseload of different mags, and have had -no- problems at all, never even came close to losing a single one. The lack of webbing on the bottom is to allow for adjusting the height of the rear plate by moving the waist-fastener up or down. Reborn has it in the lowest setting as of now, but as you see there is another set of wide vertical webbing which would allow for it to slide through, which is the way I'm running mine as of now. PALS webbing there could very well interfere with that ability, but no doubt HSGI would be willing to add some for you if you were dead-determined to do so I was specifically worried about the new models because the bungee cord is sized for real m16 magazines where the airsoft ones look too short to even touch it. My satch and all of my friends old ones have full PALS on the back all the way to the bottom. The other thing that still looks undone to me is that you can fold the bib down and run it lowprofile with the x harness to make it into a chestrig but they dont give you a way to "lock down" the bib in the folded position Link to post Share on other sites
The Crunchy Bunny Posted January 16, 2009 Report Share Posted January 16, 2009 I just sewed on two pieces of velcro, hook on the bib, loop on the lower part/mag pouches of my 'Satch. seems to work well enough. evansy, what mag pouches are on your RACK? Link to post Share on other sites
evansy Posted January 16, 2009 Report Share Posted January 16, 2009 They're TRS ones from flecktarn.co.uk. The main flap can be tucked down the back of the mags and only the small tab used to keep the mags in. It works well with plain mags but with magpuls its a pain in the *albartroth*. They'll probably work with ranger plates tho. Link to post Share on other sites
jviola Posted January 17, 2009 Report Share Posted January 17, 2009 Moved the EOTech back, looks much better IMO. Link to post Share on other sites
ghost_x3 Posted January 17, 2009 Report Share Posted January 17, 2009 don't all the purists hate that? i actually think it looks pretty good like that! Link to post Share on other sites
Kraut Posted January 17, 2009 Report Share Posted January 17, 2009 Heres my latest SF/PMC inspired loadout. Sorry for the bad pics its just too overcast today. http://img.photobucket.com/albums/v469/eva...ar/PICT0244.jpg http://img.photobucket.com/albums/v469/eva...ar/PICT0245.jpg http://img.photobucket.com/albums/v469/eva...ar/PICT0246.jpg http://img.photobucket.com/albums/v469/eva...ar/pict0202.jpg The belt kit has the same mag pouches as the chest rig atm so all together the kit carries 12 mags. Who makes the mag pouches on the rig? Link to post Share on other sites
evansy Posted January 17, 2009 Report Share Posted January 17, 2009 Who makes the mag pouches on the rig? Bulle Link to post Share on other sites
Jimisin73 Posted January 21, 2009 Report Share Posted January 21, 2009 My new SF inspired cool weather loadout: Dragon Red Knock Off - "Alpha" Jacket (Caution - the sizing on these is way off -a Large is more like a Medium I'm 6' and approx. 225 lbs and this barely fits) Wilson Combat 1911 Paddle SERPA for 1911 Temperate weight Woodland BDU Bottoms Long Sleve Thermal T-shirt (Under Tight Fitting Waterproof Gortex Jacket) Merrel Moab XCRs Castle Armored Gloves (or Mechanics Gloves depending - Castles if CQB is expected, Mechanics for outdoor) Paca MBSS with weighted Plates MAP SABRE Radio Cavalry Headset Ski Mask (Folded into a watchcap) CQBR + all the usual bits and bobs Link to post Share on other sites
aznsk8s87 Posted January 23, 2009 Report Share Posted January 23, 2009 I know this will seem a dumb question, but for all the geardos out there, how accurate do you think the TV show "The Unit" is in depicting USSF in non-US Military attire (aka, they look like civilians/PMC's)? Is it worth using as a reference? Link to post Share on other sites
Jagdraben Posted January 23, 2009 Report Share Posted January 23, 2009 Not very and yes, respectively. Link to post Share on other sites
Mr Foxhound Posted January 23, 2009 Report Share Posted January 23, 2009 Dont they use like standard crossdraw vests? Atleast thats what I saw in the only episode...lol Link to post Share on other sites
evansy Posted January 23, 2009 Report Share Posted January 23, 2009 Dont they use like standard crossdraw vests? Atleast thats what I saw in the only episode...lol They moved onto molle in the later seasons. They even had a vest I liked the look of in Season 3 (iirc) but I couldnt find who it was made by. Link to post Share on other sites
Alfer Posted January 24, 2009 Report Share Posted January 24, 2009 in season 3 they moved on to black IBA's Link to post Share on other sites
evansy Posted January 24, 2009 Report Share Posted January 24, 2009 in season 3 they moved on to black IBA's Are you sure it was IBA's? The vest I'm thinking of was in Season 3 Ep 4 and didnt look anything like an IBA Link to post Share on other sites
Hendrix2247 Posted January 24, 2009 Report Share Posted January 24, 2009 Is that the one where the vice president-elect was assassinated? If so, I believe that is a black Paraclete HPC or a Condor PC w/cummerbund in black Link to post Share on other sites
Azulsky Posted January 24, 2009 Report Share Posted January 24, 2009 Paraclete HPC design Link to post Share on other sites
evansy Posted January 24, 2009 Report Share Posted January 24, 2009 Is that the one where the vice president-elect was assassinated? If so, I believe that is a black Paraclete HPC or a Condor PC w/cummerbund in black It was the one where they had to get embasy staff to a safety and got stuck in a minefield. Link to post Share on other sites
sparco7777 Posted January 25, 2009 Report Share Posted January 25, 2009 Pretty much all there gear is condor as in most movies/tv shows these days sadly. Link to post Share on other sites
Roecar Posted January 25, 2009 Report Share Posted January 25, 2009 Well ne thing about Condor is their pretty ballsy nowadays. Their selling their own version of the MARCIRAS under the noses of Eagle and thus far getting away with it. If they can manage to pull this kind of stuff off I'd expect to see semi-accurate replicas of all our favorites PCs and armor carriers. Its sold on Airsoftgi's website. It looks pretty true to the MARCIRAS to me. Link to post Share on other sites
Reborn Posted January 25, 2009 Report Share Posted January 25, 2009 Condor's fine if you're shopping for MOLLE accessories - I have some of their pouches and a holster in use (heavy use) and they are holding up fine. Even if they start wearing out, I can easily and cheaply replace them. But a full plate carrier? I wouldn't trust the quality. Just because it is accurate doesn't mean that it will hold up to heavy abuse. Link to post Share on other sites
Roecar Posted January 25, 2009 Report Share Posted January 25, 2009 Condor Pre-CIRAS look alikes Pantac CIRAS Condor was my first PC and I loved it. The Coyote PC lasted me this last year and a half through heavy use both CQB/Outdoor very well. The black one last me almost three years. The only reason why I don't use either anymore is, I became a gearwhore and bought a Pantac CIRAS. The thing is if you're on a budget Condor is your best bet, plus look at both of my PCs and you can only tell they're different if you look very hard. Condor was my first and for the price is the best for your average airsofter Link to post Share on other sites
Reborn Posted January 26, 2009 Report Share Posted January 26, 2009 Link to post Share on other sites
Mr Foxhound Posted January 26, 2009 Report Share Posted January 26, 2009 Looks amazing. But, I really hate when people do that with holsters. Because its dumb and permotes bad aiming. Has no point IMO, and is not very realistic as most real operators wouldnt do that. If your drawing a side arm, you shouldnt have a rifle held in the other hand. With your sling it looks like you dont even need it on the wrong side. Its your loadout, just saying =D Perfect loadout, that aside Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.