Carsten Posted April 13, 2009 Report Share Posted April 13, 2009 mail him! Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 He'd mail William(as well as I did to help him). I think the better solution would be a new whole receiver assembled Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 Have you seen the lower too? Â Oxidation and furthermore, I can only shoot my foot with. Â And the nozzle "300" fps give around 500 fps. Â Midma Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 Seems that the guys at the factory are quite unconcentrated these last weeks....It seems that Midma's gun has not been well painted and oxydation treated, as well as its stocking condition. When seiing many guns on that forum having paint problems make me think about storage problems back at the factory. But for the magazine condition, it's unbelievable and ununderstandable to see how this one is used! This will give more work to William and add some delays to many future orders since I assume He'll have to check every single gun, magazine and spare part he actually have in stock, as well as all the other he'll get in stock... Quote Link to post Share on other sites
Nazio Posted April 13, 2009 Report Share Posted April 13, 2009 @ Wolf: here you'll find a RS Charging Handle: Would this fit without modifications ? Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 Would this fit without modifications ? Â yep dude I'm using it OOB Quote Link to post Share on other sites
Rawbell Posted April 13, 2009 Report Share Posted April 13, 2009 Hi. Â I'm from the same french forum than Midma and I was thinking about ordering a WE in AB, but it doesn't seem very encouraging ... Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 Things seems to be well when William ship the packages himself... Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 It seems to be a lemon which has been send back to AB who send me after. Â Midma Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 With it's look, that's what I'm thinking too. But it's not necessary William's fault. Since his colleague has made few mistakes in some of my orders(luckyfully mine were not as bad as yours guys, since he forgot to add a part 42 once and shipped out my order as Outward Ordinary Parcel insteed as with EMS...) Quote Link to post Share on other sites
trinco Posted April 13, 2009 Report Share Posted April 13, 2009 Midma, did the customs open the box? if yes then probably they tested it out first just to make sure its not a deadly weapon since GBB rifle is new in the market... Â i used to order a lot of shirts from china before and the parcel was inbound into custom inspection so they cut the parcel using sharp blade, out of 5 shirts 2 were deeply cut Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 The customs didn't open the box  Midma Quote Link to post Share on other sites
WETTI Posted April 13, 2009 Report Share Posted April 13, 2009 Seems that the guys at the factory are quite unconcentrated these last weeks....It seems that Midma's gun has not been well painted and oxydation treated, as well as its stocking condition. When seiing many guns on that forum having paint problems make me think about storage problems back at the factory. But for the magazine condition, it's unbelievable and ununderstandable to see how this one is used! This will give more work to William and add some delays to many future orders since I assume He'll have to check every single gun, magazine and spare part he actually have in stock, as well as all the other he'll get in stock... Â This has NOTHING to do with anything in the factory. All guns are QC'd & shipped in brand new condition from our factory. Â For whom this may concern: WETTI is currently working on setting up a local sole distributorship/dealer network/parts/service center for the region of France/Belgium. Â Just give us a little time... WETTI Quote Link to post Share on other sites
Marky [UE] Posted April 13, 2009 Report Share Posted April 13, 2009 (edited) Would this fit without modifications ? (reference to RS charging handle)Â This has been discussed many times over the past few months and most people would NOT recommend using a RS charging handle out of the box. It does work but not correctly and can affect the SOPs. The best current options are the recently released steel or 7075 charging handles available from AB or the pre-modified (as per wiki article) and upgraded (latch replaced with larger tactical version) RS charging handles from Horizon Tactical. Â I know this is now one huge discussion but I really suggest you at least search old posts or read the wiki. The wiki contains some invaluable points and a large amount of experience. Â I am not sure any UK suppliers currently have upgraded charging handle options in stock. You could try Tactical Quartermaster or Land Warrior Airsoft though. Â Good luck. Edited April 13, 2009 by Marky [UE] Quote Link to post Share on other sites
chris u'5 Posted April 13, 2009 Report Share Posted April 13, 2009 Agreed. The Wiki guide contains pretty much everything you need to know when you are getting started. Consider it your Bible Quote Link to post Share on other sites
Carsten Posted April 13, 2009 Report Share Posted April 13, 2009 for your information, I've installed the tac-latch from EB.. it needed some minimal modification to fit due to a slightly different shape,.. very easy indeed! Â Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 This has NOTHING to do with anything in the factory. All guns are QC'd & shipped in brand new condition from our factory. For whom this may concern: WETTI is currently working on setting up a local sole distributorship/dealer network/parts/service center for the region of France/Belgium.  Just give us a little time... WETTI  So, what can I do?  Midma Quote Link to post Share on other sites
Eliminator Posted April 13, 2009 Report Share Posted April 13, 2009 This has NOTHING to do with anything in the factory. All guns are QC'd & shipped in brand new condition from our factory. For whom this may concern: WETTI is currently working on setting up a local sole distributorship/dealer network/parts/service center for the region of France/Belgium.  Just give us a little time... WETTI  There is a shop in France wich could be good. It's www.totalairsoft.com. it's located in Mulhouse, Alsace, France, near the German border. Quote Link to post Share on other sites
chris u'5 Posted April 13, 2009 Report Share Posted April 13, 2009 (edited) So, what can I do? Midma Exactly what you are doing. Contact the retailer you purchased it from.  There is no doubt though that externally many of the WE M4s that have been purchased are in far from perfect condition. Perhaps on some occasions this is to do with retailers but the same cosmetic faults can be seen on many of these rifles that have been purchased by people from all corners of the Globe. So to say "this has NOTHING to do with anything in the factory" is kinda hard to believe, of course on this occasion with Midma's rifle this may be true (it may the responsibility of the retailer) but it is quite a blanket statement if you are referring to production as a whole. Not trying to get at anyone, I'm just saying Edited April 13, 2009 by chris u'5 Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 Alright, but I'm not lying, there is a problem somewhere. Â If it isn't WETTI, it's AB. It can't be the customs, the parcel hasn't been open. Â Midma Quote Link to post Share on other sites
Carsten Posted April 13, 2009 Report Share Posted April 13, 2009 (edited) You said that the BBs fall down after about 15m? Can it be a defective valve #42!? Can you check your valve assembly? Â actually.. its quite simply ( ).. the gas has to go somewhere.. if its not accelerating the BB its lost somewhere in the system.. Edited April 13, 2009 by Carsten Quote Link to post Share on other sites
chris u'5 Posted April 13, 2009 Report Share Posted April 13, 2009 Alright, but I'm not lying, there is a problem somewhere. If it isn't WETTI, it's AB. It can't be the customs, the parcel hasn't been open.  Midma I wasn't suggesting you were lying Midma.  Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 Carsten: I check all the valve, the gaz can't go anywhere except in the nozzle. Â I sand a little the nozzle too, nothing. Â chris u'5: I know you were not. It was just to say that if nobody's lying, its AB fault. Â Today, I can't use my M4. Â Midma Quote Link to post Share on other sites
chris u'5 Posted April 13, 2009 Report Share Posted April 13, 2009 I can understand your frustration Midma. Looking at the picture you posted of your magazine, it has been used quite a bit! Quote Link to post Share on other sites
Midma Posted April 13, 2009 Report Share Posted April 13, 2009 (edited) It not very thh magazine, its the receiver: Â It was a M4 bought only for collection. Â Midma Edited April 13, 2009 by Midma Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.