08kecarv Posted November 26, 2009 Report Share Posted November 26, 2009 (edited) Where is/did everyone buy their PDW from? I've been wanting to get one for soooooooooooo very long now and I figure it'll be a nice Christmas gift to myself (and it won't hurt the bank as much since Christmas=getting money time). Only places i've found it are EBB ( ) and PX airsoft. I'm specifically looking for the laser engraved version. Help me finally get my PDW!!! Mahalo for the help guys Edited November 26, 2009 by 08kecarv Quote Link to post Share on other sites
appslapp Posted November 26, 2009 Report Share Posted November 26, 2009 Just to be clear.....the dboys pdw is a ACM aeg! Quote Link to post Share on other sites
mrpugster Posted November 26, 2009 Report Share Posted November 26, 2009 Just to be clear.....the dboys pdw is a ACM aeg! Now this is something that has confused me, ACM = All China Made right, now is ACM a company is in own right or just a term used to describe a 'generic' item produced within China? ehobbyasia describes this new KAC as a JM.. http://shop.ehobbyasia.com/aeg/other-aeg/j...ft-aeg-902.html Quote Link to post Share on other sites
appslapp Posted November 26, 2009 Report Share Posted November 26, 2009 made in the same factory with a diffirent brand i would say.........but not by all means 100% correct observation by me, i can be wrong. Quote Link to post Share on other sites
mrpugster Posted November 27, 2009 Report Share Posted November 27, 2009 made in the same factory with a diffirent brand i would say.........but not by all means 100% correct observation by me, i can be wrong. From watching a video on youtube comparing the two I don't think they would be made at the same factory, they seem to have enough differences to warrant a different manufacturing process. Maybe the factories used different materials though. Plus by not using a brand it's harder for authorities to crack down I guess.... Quote Link to post Share on other sites
mrpugster Posted November 27, 2009 Report Share Posted November 27, 2009 (edited) Where is/did everyone buy their PDW from? I've been wanting to get one for soooooooooooo very long now and I figure it'll be a nice Christmas gift to myself (and it won't hurt the bank as much since Christmas=getting money time). Only places i've found it are EBB ( ) and PX airsoft. I'm specifically looking for the laser engraved version. Help me finally get my PDW!!! Mahalo for the help guys Most places out of stock but try this: http://shop.ehobbyasia.com/aeg/other-aeg/j...ft-aeg-902.html they also have the DBOYS in to.. Edited November 27, 2009 by mrpugster Quote Link to post Share on other sites
08kecarv Posted November 28, 2009 Report Share Posted November 28, 2009 @pugster: Thanks for the link, i've been eying that thing out for a while now. I was actually only looking for a DBOYS PDW though as it is better quality than the JM one; Any links for that one? Quote Link to post Share on other sites
rainbow5ive Posted January 12, 2010 Report Share Posted January 12, 2010 I just added a Guarder cutoff lever and a medium eg1000 to my downgraded pdw. Its running about 330 on .20s. Even on a 7.4v lipo it just sings. A motor upgrade to the pdw is the most worthwhile upgrade you can make. Quote Link to post Share on other sites
appslapp Posted January 30, 2010 Report Share Posted January 30, 2010 dboys pdw takedown part one..new verison Quote Link to post Share on other sites
farrasdevell Posted January 30, 2010 Report Share Posted January 30, 2010 About 10k though mine now without a hitch, hop wil need changing soon. I am looking to pick up an ICS 3000 motor and some form of grip as i am finding the short grip not idea. (serviceable but not ideal for my long hands) Quote Link to post Share on other sites
beretta Posted January 30, 2010 Report Share Posted January 30, 2010 Great job appslap., Did ya manage to repair the the selector plate or did ya need a new one? Quote Link to post Share on other sites
appslapp Posted January 30, 2010 Report Share Posted January 30, 2010 I just unbend it...........but its not perfect;) Quote Link to post Share on other sites
beretta Posted January 31, 2010 Report Share Posted January 31, 2010 As long as it works huh. Quote Link to post Share on other sites
laleme Posted January 31, 2010 Report Share Posted January 31, 2010 Does anyone know if the RATech lipo conversion will work with the Dboys PDW? Quote Link to post Share on other sites
Jazz_nz Posted January 31, 2010 Report Share Posted January 31, 2010 Does anyone know if the RATech lipo conversion will work with the Dboys PDW? Yes it does, cost as much as the initial purchase, but it fits Quote Link to post Share on other sites
laleme Posted January 31, 2010 Report Share Posted January 31, 2010 Thats great, thanks! Quote Link to post Share on other sites
Jim01 Posted February 1, 2010 Report Share Posted February 1, 2010 Does anyone know if the RATech lipo conversion will work with the Dboys PDW? I dont see why not as its practically a direct copy? But dont just my word for it as im just speculating Quote Link to post Share on other sites
Cally86 Posted February 6, 2010 Report Share Posted February 6, 2010 Hey can this gun have a silencer ? is there a way to up the Rate Of fire? Quote Link to post Share on other sites
appslapp Posted February 11, 2010 Report Share Posted February 11, 2010 part 2 takedown guied: Quote Link to post Share on other sites
beretta Posted February 11, 2010 Report Share Posted February 11, 2010 Hey can this gun have a silencer ? is there a way to up the Rate Of fire? These just appeared on ebaybanned not long ago, http://www.ebairsoft.com/aabb-style-silenc...der-p-2960.html If you want improved ROF, change out the motor, its a little on the slow side. its a Medium shaft length you need similar to the PSG etc., alternatively you could switch the grip for a regular M4 type and use the more common long shaft motor, G&P M120, Systema Turbo etc etc. Quote Link to post Share on other sites
rainbow5ive Posted February 22, 2010 Report Share Posted February 22, 2010 Does anyone have any feeding issues? Mine seems to only put a bb down the barrel every other shot in both semi and full. Quote Link to post Share on other sites
farrasdevell Posted February 23, 2010 Report Share Posted February 23, 2010 (edited) check the gearbox, sounds like either your tapped plate has worn or the sector clip has dislodged or isnt doing it's job. am waiting until i am not broke to swap out my pistol grip and motor for a highspeed long motor and a reg m4 grip. still cannot get over how good this little gun is. Edited February 23, 2010 by farrasdevell Quote Link to post Share on other sites
rainbow5ive Posted February 23, 2010 Report Share Posted February 23, 2010 I've had my local gunsmith take a look at it and he declared it wasn't the gb. Could it be the ###### hopup unit? Quote Link to post Share on other sites
beretta Posted February 24, 2010 Report Share Posted February 24, 2010 Might they be hitting your flash hider? ive seen a pair of em with that, other than that i would say its the hopup of you've already comfirmed the gearbox to be fine. Quote Link to post Share on other sites
screamin_weasel Posted March 8, 2010 Report Share Posted March 8, 2010 does anybody have a motor adjustment screw for one of these, or know of something that does the job ? dont really want to buy a new motor or change the grip. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.