matrigs Posted August 11, 2014 Report Share Posted August 11, 2014 Do guarder threaded barrels work in these? No Marui compatible outer barrel will work. I tried an APS ACP601 barrel and no chance. 1 Quote Link to post Share on other sites
Finbarqs Posted September 15, 2014 Report Share Posted September 15, 2014 don't know if this happens to anyone, but my G19 goes to auto fire by itself, which I which I can turn that *suitcase* off. It's a 19, not a 18. Quote Link to post Share on other sites
Wynthorpe Posted September 15, 2014 Report Share Posted September 15, 2014 Mine did the same, had to epoxy the sear into semi only so it stayed there. Quote Link to post Share on other sites
NonEx Posted September 15, 2014 Report Share Posted September 15, 2014 Aaah, our age old suspicions of additional moving parts in the trigger mechanism causing problems has come true. Shame. Quote Link to post Share on other sites
matrigs Posted September 15, 2014 Report Share Posted September 15, 2014 Yes, but emptying a 50 rds clip in half a second is totally worth it. Once it works, though. My G19 is in service for the third week now and it's looking pretty bleak right now. Quote Link to post Share on other sites
Finbarqs Posted September 15, 2014 Report Share Posted September 15, 2014 I think it's just going to full auto, even when the switch is on single. Quote Link to post Share on other sites
Burner1352 Posted September 24, 2014 Report Share Posted September 24, 2014 Is someone able to give me links to where I can find an upgraded 150 spring and rod for my 19, I either suck at Google at the moment or I'm not seeing it. Sorry ad thanks for any help. Cheers Quote Link to post Share on other sites
TheFull9 Posted September 24, 2014 Report Share Posted September 24, 2014 On that note, if anyone's got a suggestion for a tougher recoil spring for the 17 I'd definitely like to hear it. Both my G17s and both M&Ps are lacking in this department; they shoot fine and battery fine if you're firm with them but I just don't see this problem with any other pistol I've handled. Quote Link to post Share on other sites
NonEx Posted September 24, 2014 Report Share Posted September 24, 2014 (edited) Is someone able to give me links to where I can find an upgraded 150 spring and rod for my 19, I either suck at Google at the moment or I'm not seeing it. Sorry ad thanks for any help. Cheers You can use a TM 1911 aftermarket spring of 150% strenght and install. If it's too stiff just cut some coils. There are no Stark Glock 19 dedicated aftermarket springs that I know of. Same goes for the Glock 17. You have to remove the dual recoil spring system from the original Stark and remove one of the spring cups when installing a TM 1911 spring. Edited September 24, 2014 by NonEx Quote Link to post Share on other sites
Burner1352 Posted September 24, 2014 Report Share Posted September 24, 2014 Ok thanks now what about the spring rod, is it a 1911 as well or does it have to be a certain one that has that little clip on the back to "lock" in to the barrel assembly. Quote Link to post Share on other sites
matrigs Posted September 24, 2014 Report Share Posted September 24, 2014 Why do you want to exchange the rod as well? It's pretty sturdy, and if it breaks you can buy another original one from WGCSHOP for 2 bucks. Regarding the spring, WGC mentions these as being "Stark compatible": http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=GD-GLOCK-109&search=special&rs=stark&catid=&cat=&view_choice=a Although i am not entirely sure about that, as i mentioned above that i also purchased supposedly fitting iron sights which don't fit at all. Quote Link to post Share on other sites
Burner1352 Posted September 24, 2014 Report Share Posted September 24, 2014 I was under the understanding that once you upgraded the spring, you needed to upgrade the spring guide rod to handle the increased spring rate and recoil. I guess I was miss informed. Quote Link to post Share on other sites
NonEx Posted September 24, 2014 Report Share Posted September 24, 2014 No, 1911 spring guides do not work. RS Glock guides do not work. As mentioned above no need to change out the guide rod. What iron sights are we talking about? RS ones or airsoft ones? The spring kit linked above seems like it could be worth a try, but throw in a 1911 150% spring in the order just as a backup in case they are too weak. Quote Link to post Share on other sites
Burner1352 Posted September 24, 2014 Report Share Posted September 24, 2014 Will do thanks for the help and clearing up the miss information Quote Link to post Share on other sites
DrAlexanderTobacco Posted September 24, 2014 Report Share Posted September 24, 2014 Mine did the same, had to epoxy the sear into semi only so it stayed there. Would you mind helping me out and taking some pictures of what you did? Going to try this with mine. Quote Link to post Share on other sites
NonEx Posted October 3, 2014 Report Share Posted October 3, 2014 (edited) Well *fruitcage* my balls and call me Sally... I think I might be getting my steel Glock 19 after all I was at Customs this week for questioning about it and just found it the case is dropped and the goods will be released. Not a fun week for me knowing I was under investigation. But the interrogaters were nice and I apparantly made it clear to them I have no crimilan intent with my airsoft hobby so. I feel a million tons lighter right now :| Edited October 3, 2014 by NonEx 1 Quote Link to post Share on other sites
Dj_komodo Posted October 3, 2014 Report Share Posted October 3, 2014 Awsome news! unboxing video? Quote Link to post Share on other sites
NonEx Posted October 3, 2014 Report Share Posted October 3, 2014 I think I'm going to lay low for a bit *fruitcage* stressful... :| But yeah, will put it in my Stark 19 Glock box and make a video and comparison etc. I need to try and wind down this weekend, maybe drink some vodka or something Also I think it will take anywhere from 1-3 months before I actually get it. Quote Link to post Share on other sites
Wynthorpe Posted October 3, 2014 Report Share Posted October 3, 2014 Why was it held by customs? Sorry can't read through all the thread lol. Quote Link to post Share on other sites
Wynthorpe Posted October 3, 2014 Report Share Posted October 3, 2014 On another note i see its out of stock at ehobby, hope they getting it back in as i want another. Quote Link to post Share on other sites
NonEx Posted October 3, 2014 Report Share Posted October 3, 2014 (edited) It's a long story but to shorten it down I was told by UPS first it had been confiscated for being powered by GreenGas, which it is not since it's CO2. Oh, and it was taken by Customs in April 2014... Then I was told by customs it had been taken for "random inspection". The interogation focused mainly on what I used my guns for, what my interests and purposes with them was etc. If they were within the legal limits in terms of Joules (3 for semi and auto and 10 for bolt rifles). I got the sense that they were wondering if I was a thug trying to build guns to hurt people or damage property etc. Either way, I want to just forget about all that and try to recover and move on. It was not fun :| Edited October 3, 2014 by NonEx 1 Quote Link to post Share on other sites
icolater Posted October 4, 2014 Report Share Posted October 4, 2014 I used a guarder Tokyo marui guide rod in a stark g18, before I got rid of it !! Quote Link to post Share on other sites
TheFull9 Posted October 4, 2014 Report Share Posted October 4, 2014 Trying to put the front part of the lower internals back in to the frame on one of my 17s. All goes back in and works with a slide on if I reset the trigger myself, but for some reason it won't pop back to the cocked position under its' own steam. I've reattached the small spring that goes between the trigger bar and the smaller of the 2 roll pins (has a hook on one end and an eyelet on the other) in the proper way, using my other gun as reference, but something's not right. Anyone got any ideas? Quote Link to post Share on other sites
NonEx Posted October 4, 2014 Report Share Posted October 4, 2014 Here's an idea. Post some pictures It could be the spring on the trigger bar or your trigger bar is not in the right place in the hammer mech. Quote Link to post Share on other sites
TheFull9 Posted October 4, 2014 Report Share Posted October 4, 2014 (edited) Looks the same as my black gun to my eye, spring is in the same place. Not the easiest of things to take pictures of: FDE gun has the reset issue. I'm trying to think if the Vickers slide lock might cause an issue somehow, if it's maybe pressing against the trigger, might try putting the stock slide lock back in to see what happens. Edited October 4, 2014 by CKinnerley Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.