christhesecond Posted June 5, 2016 Report Share Posted June 5, 2016 Not sure how much interest there will be for this here but a few people might appreciate it I guess. My current Tm m4 Gbbr build is an NSW "recce rifle" build 1 Quote Link to post Share on other sites
CaptCalvin Posted June 5, 2016 Report Share Posted June 5, 2016 (edited) Modern consensus regarding burst modes expecially Colt's mechanism seems to lean on the unfavorable side anyway. Non self resetting as well as inconsistent trigger pull depending on which position the ratchet is in makes it very undesirable. Also, you didn't have to swap out the buffer for a rifle length one? Wouldn't you have to stick a massive amount of coins in there otherwise? Edited June 5, 2016 by CaptCalvin Quote Link to post Share on other sites
Bada Bing Posted June 6, 2016 Author Report Share Posted June 6, 2016 Modern consensus regarding burst modes expecially Colt's mechanism seems to lean on the unfavorable side anyway. Non self resetting as well as inconsistent trigger pull depending on which position the ratchet is in makes it very undesirable. Also, you didn't have to swap out the buffer for a rifle length one? Wouldn't you have to stick a massive amount of coins in there otherwise? The screw on end cap of the stock tube is elongated and along with the rubber buffer piece making up almost the correct length for the recoil parts. Just the bolt lock wasn't quite catching, this may be because I'm using propane and the bolt carrier is moving too quickly for a positive catch. Manual charging on an empty magazine always has positive lock as well as firing when low on gas. Like very Recce rifle there mate, it's very hot! Quote Link to post Share on other sites
christhesecond Posted June 6, 2016 Report Share Posted June 6, 2016 Cheers. Needs paint and a can. Waiting on vfc for the can. Quote Link to post Share on other sites
christhesecond Posted June 28, 2016 Report Share Posted June 28, 2016 And thanks to VFC, here it is! Been having some trouble with mags jamming bbs in them. Using blaster Devils 0.3s. MWS Facebook group has recommended g&g, Tokyo Marui or madbull. Anyone here have any experience with this problem? 1 Quote Link to post Share on other sites
Bada Bing Posted June 28, 2016 Author Report Share Posted June 28, 2016 That's pure filth Chris. Good job! I use the same bbs and my mags are fine with them. Are yours new magazines? I found with new TM mags, especially pistols mags, they tend to stick when feeding into the gun. But this passes over a short space of time with general use. Sometimes I'd leave a troubled loaded magazine over night and try again the following day. That's my experiences anyway, it could be as they say on the group page. Ammo related... And I love the night vis camo! Quote Link to post Share on other sites
christhesecond Posted June 29, 2016 Report Share Posted June 29, 2016 Cheers man. Well I'm gonna get some different ammo just in case. Only seems to happen in the original mag that came with the gun. All he new mags bought last month seem fine so far.... Strangeeeee Quote Link to post Share on other sites
Alias1983 Posted June 29, 2016 Report Share Posted June 29, 2016 Get them freshness things you find on food and put them in the package. Bbs do swell somehow Quote Link to post Share on other sites
DeltaZero Posted June 30, 2016 Report Share Posted June 30, 2016 Just seen UAC have a CNCed bolt carrier en route for this. Unsure if its aluminium or steel (I'd place bets on ally). Doesn't look far out either.. Im tempted by a MWS even more now. Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
BioRage Posted June 30, 2016 Report Share Posted June 30, 2016 Just seen UAC have a CNCed bolt carrier en route for this. Unsure if its aluminium or steel (I'd place bets on ally). Doesn't look far out either.. Im tempted by a MWS even more now. Sent from my iPhone using Tapatalk >:| x2 Quote Link to post Share on other sites
CALLAHAN_88 Posted July 10, 2016 Report Share Posted July 10, 2016 I tested an Magpul Moe Mil-spec stock on mine TM M4 MWS GBB and i fist like a charm! 1 Quote Link to post Share on other sites
PureSilver Posted July 11, 2016 Report Share Posted July 11, 2016 i fist like a charm! 2 Quote Link to post Share on other sites
uscmCorps Posted July 11, 2016 Report Share Posted July 11, 2016 Sounds painful. 1 Quote Link to post Share on other sites
CALLAHAN_88 Posted July 11, 2016 Report Share Posted July 11, 2016 Anybody who has change the pistol grip yet? Quote Link to post Share on other sites
christhesecond Posted July 12, 2016 Report Share Posted July 12, 2016 Check my pics from the last page dude. Ergo pistol grip fitted. Quote Link to post Share on other sites
CALLAHAN_88 Posted July 13, 2016 Report Share Posted July 13, 2016 HAHAHA LOL i missed that i was looking at all the other goodies! What sight are that? Quote Link to post Share on other sites
christhesecond Posted July 13, 2016 Report Share Posted July 13, 2016 Tac-one 12424ir..... It's a replica of a nightforce NXS scope Quote Link to post Share on other sites
airsoftmatthias Posted July 14, 2016 Report Share Posted July 14, 2016 Very usual question, but what is the outer diameter of the TM MWS barrel? Specifically, the part of the barrel where the gas block sits on? Quote Link to post Share on other sites
Bastel Posted September 30, 2016 Report Share Posted September 30, 2016 Does anybody knows if a rs or we upper will fit? Quote Link to post Share on other sites
CaptCalvin Posted September 30, 2016 Report Share Posted September 30, 2016 Nope. Won't fit. Trouble is mainly with the hopup system. Quote Link to post Share on other sites
Siavash Posted September 30, 2016 Report Share Posted September 30, 2016 We Upper is complete different shape..and few RS steel parts fit but not upper or lower Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
Bastel Posted October 11, 2016 Report Share Posted October 11, 2016 Thanks for your answer guys. Can anybody make some pics from the Fire selector for me? Quote Link to post Share on other sites
CALLAHAN_88 Posted October 21, 2016 Report Share Posted October 21, 2016 Can you change the buffer tube on this gun? I want Strike industries redline! Quote Link to post Share on other sites
Supernanny Posted October 26, 2016 Report Share Posted October 26, 2016 No, buffer tube is TM spec thread. https://www.facebook.com/groups/954757591262527/ Quote Link to post Share on other sites
Leshy Posted October 27, 2016 Report Share Posted October 27, 2016 Has anyone installed a wide bore inner, what brand and length? I need to drop my fps to sub 350 from 370. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.