evilliboba Posted August 18, 2007 Report Share Posted August 18, 2007 That is very nice. yeah the price on each unit would be nice. What he said. Link to post Share on other sites
Fenneo Posted August 18, 2007 Report Share Posted August 18, 2007 (edited) The shoulder pads on the production run will be padded, as well as the rig having the correct binding on the front and rear plates. They are not a cheap item as it is built with all the highest quality materials and takes over 50 hours to construct. They will also be custom sized to your measurements. They are adjustable but it better to have a good fit and not stretch it right. The price will be: $400 for Coyote, Ranger Green, OD, and Black. $420 for Multicam, ACU. I am not sure if I can source Marpat yet. I will however offer a $60 discount if the buyer pays a $150 deposit. Keep the questions coming. -Erik ....I may accept some Airsoft trades, mainly WA pistols. Feel free to PM me with any offers you have WA or anything airsoft. Edited August 18, 2007 by Fenneo Link to post Share on other sites
evilliboba Posted August 18, 2007 Report Share Posted August 18, 2007 *Chokes on soda* $420... Well there went that. Not a bad price but it is more than I'd be willing to pay for something that does basically the same thing as my $30 crossdraw. Me am not teh geardoz. Anyways it looks very nice just too rich for my blood. Link to post Share on other sites
perr_mike Posted August 18, 2007 Report Share Posted August 18, 2007 Fenneo as others have said, it looks good. I'd like to see the finished shoulder pads though before commiting to purchase one! I assume you will be just padding them and not recreating the rubber pads on the shoulders? Link to post Share on other sites
Architect Posted August 18, 2007 Report Share Posted August 18, 2007 Very nice Fenneo, looks very impressive. I hope you have a good hiding place though because Crye's lawyers will probably come after you sooner or later Link to post Share on other sites
Fellowz Posted August 18, 2007 Report Share Posted August 18, 2007 there is nowere to hide from crye and their nazi lawyers Link to post Share on other sites
Ragnar27 Posted August 18, 2007 Report Share Posted August 18, 2007 The internets Link to post Share on other sites
chas Posted August 18, 2007 Report Share Posted August 18, 2007 Does anybody know a place where I could get the Crye knee- and elbow rubber pads separately? Thanks! Link to post Share on other sites
Fellowz Posted August 18, 2007 Report Share Posted August 18, 2007 crye are out of stock everywere, the few places that have them jacked up their prices, so unless you want to spend a small fortune go on ebay, i would wait for crye to stock them so they would be easier to find and cheaper to buy. Link to post Share on other sites
jonarthur Posted August 18, 2007 Report Share Posted August 18, 2007 my teammate is selling them ... his name is crimson on the forum give him a pm .. Link to post Share on other sites
Ragnar27 Posted August 18, 2007 Report Share Posted August 18, 2007 Those are fields no? Link to post Share on other sites
Crimson Posted August 18, 2007 Report Share Posted August 18, 2007 (edited) Lolz i am selling the Crye black knee pads not the combat ones Yeh i have crye combats and combat top, i sold my combat bottoms on e bay for $900, (my size is the most saught after) I used the true spec and sewed in the combat pants they look sweet ! Edited August 18, 2007 by Crimson Link to post Share on other sites
jonarthur Posted August 18, 2007 Report Share Posted August 18, 2007 my bad ... ill go back to my china MC .. lol Link to post Share on other sites
Architect Posted August 18, 2007 Report Share Posted August 18, 2007 crimson can you please post pics of the mod you did to your tru-specs with the combat knee pads? Link to post Share on other sites
evilliboba Posted August 19, 2007 Report Share Posted August 19, 2007 *Searches eBay for Crye Multicam* Holy mother of militaria! Real Cyre stuff is selling for $400-1K. Link to post Share on other sites
jonarthur Posted August 19, 2007 Report Share Posted August 19, 2007 hey .. just had a idea .. i was just watching the extream channel , it was about some motorcross guys riding around ( as they do .. ) and one was wearing body armor .. had the same kind of look to the crye armor ... so i had a look around and i found this ..http://shop.1stmx.co.uk/index.asp?function...T&productid=101 to me .. it kinda looks the same , just need cover it in multicam and molle it and put the plates on the front and back ? its just a idea .. lol any ideas .. if people think its a good idea ill order it next month and have a go at building one Link to post Share on other sites
Richwatts2002 Posted August 19, 2007 Report Share Posted August 19, 2007 hey .. just had a idea .. i was just watching the extream channel , it was about some motorcross guys riding around ( as they do .. ) and one was wearing body armor .. had the same kind of look to the crye armor ... so i had a look around and i found this ..http://shop.1stmx.co.uk/index.asp?function...T&productid=101 to me .. it kinda looks the same , just need cover it in multicam and molle it and put the plates on the front and back ? its just a idea .. lol any ideas .. if people think its a good idea ill order it next month and have a go at building one <{POST_SNAPBACK}> that could work really well! even if you just use it as a base for pannels or the shoulder strap parts! Link to post Share on other sites
Fellowz Posted August 19, 2007 Report Share Posted August 19, 2007 it wouldnt be flexible enough methinks. and will probably be alot bulkier than the crye armour. Link to post Share on other sites
msx361 Posted August 19, 2007 Report Share Posted August 19, 2007 Looks nothing like the crye armour! Link to post Share on other sites
jonarthur Posted August 19, 2007 Report Share Posted August 19, 2007 lol ok then ... think i might just have a wierd imagination ! ill give it ago anway ill probs take the front a back plates off and cover it in MC then build the 'crye' plates to go over the top Link to post Share on other sites
wasted__youf Posted August 20, 2007 Report Share Posted August 20, 2007 Fenneo as others have said, it looks good. I'd like to see the finished shoulder pads though before commiting to purchase one! I assume you will be just padding them and not recreating the rubber pads on the shoulders? <{POST_SNAPBACK}> I've seen bike tyre sewn to the shoulder to replicate the stock pad. Link to post Share on other sites
Halo C1 Posted August 20, 2007 Report Share Posted August 20, 2007 (edited) I just paid Lakota to dip my Wiley SG1's on multicam. I will post pics as soon as they get back to me. Should be about 3 days. I also just picked up the GO BAG in multicam from SO tech. It's the one that was used by the SF guys in Transformers. Will post pics of multicam load out when my glasses come in. I also picked up the HSS plate carrier in Multicam. Plates fit great (plastic ones). The carreir holds all the pouches that my ciras held. All the pouches are real crye MC to. Edited August 20, 2007 by Halo C1 Link to post Share on other sites
Halo C1 Posted August 20, 2007 Report Share Posted August 20, 2007 Have you guys checked out condoroutdoor.com? I have everything they make in multicam. So far it's held up great. It's all real MC with the multicam tags. I have 10 pouches and hydration carrier. Their drop led panel and holster for my pistol. In a few days I will get pics posted of all my gear. Link to post Share on other sites
Light Fighter Posted August 20, 2007 Report Share Posted August 20, 2007 Testing my new multicam set up. Still need better pouches for my vest. Link to post Share on other sites
Psychosis Posted August 20, 2007 Report Share Posted August 20, 2007 hey .. just had a idea .. <{POST_SNAPBACK}> It's not a bad idea at all - it might not be that close to the original MC battle chassis, but it looks like it be great for a Sci-fi body armor loadout.0 Link to post Share on other sites
Recommended Posts