Dj_komodo Posted September 8, 2019 Report Share Posted September 8, 2019 8 hours ago, HamletV said: That looks really cool, the stipple is like i did to my glock17, and I love the gold barrel, I have one But is more orange gold.. Btw what paint do you use on the slide? thanks, the pain i used is called EC-paint in the color black: https://www.asmc.com/Equipment/Military-Equipment/Camouflage/Camo-Face-Paint/EC-Paint-black-p.html 3 hours ago, Rainer1989 said: How are the EMG SAI kits for VFC Glock, do they fit and function properly? What about the looks, are they on par with GunsModify, Prime... Are the sights steel? It was a bit frustrating to make it work i must say, but it runs ok now. the sights are not steel but the finish is nice and the engravings looks ok. i don't have anything from GM or Prime so i cant compare... Quote Link to post Share on other sites
Rainer1989 Posted September 8, 2019 Report Share Posted September 8, 2019 Thanks for the reply Dj_komodo, about making it work, was it something in particular or all the fit in general? Quote Link to post Share on other sites
Dj_komodo Posted September 8, 2019 Report Share Posted September 8, 2019 36 minutes ago, Rainer1989 said: Thanks for the reply Dj_komodo, about making it work, was it something in particular or all the fit in general? no worries, there is a little pin glued on the slide above the nozzle housing for the nozzle return spring that is very hard to remove and transfer it to the new slide. No instructions came with the new slide so I had to guess and use super glue. 1 Quote Link to post Share on other sites
HamletV Posted September 8, 2019 Report Share Posted September 8, 2019 (edited) 13 hours ago, Dj_komodo said: the pain i used is called EC-paint Thanks for the reply too!. How do you paint the slide with that spray?, did did you put primer first? I understand that the paintings do not stick to that kind of metal, will get away with the sweat of the hands? it's something that always happens to me Edited September 9, 2019 by HamletV Quote Link to post Share on other sites
Dj_komodo Posted September 9, 2019 Report Share Posted September 9, 2019 2 or 3 layers of that spray and 1 layer of clear coat works fine. I have not encountered any problems with the paint coming off, but i don't take the gun out skirmishing either... 1 Quote Link to post Share on other sites
Got Wood? Posted September 10, 2019 Report Share Posted September 10, 2019 Armourer Works VX Carbine Kit. Nice little kit although the 2 accessory rails are a little high up for most designs of torch when using a fore grip. Building a G5 frame to go in it but it’s using my 17 for now, hoping to pick up a Umarex G19x next week or so 1 Quote Link to post Share on other sites
NonEx Posted September 10, 2019 Report Share Posted September 10, 2019 Yes, yes I do have wood now 1 Quote Link to post Share on other sites
Got Wood? Posted September 10, 2019 Report Share Posted September 10, 2019 Forgot to do a folded pic for you, Nonex 1 Quote Link to post Share on other sites
hitmanNo2 Posted September 10, 2019 Report Share Posted September 10, 2019 NonEx, you might like this. Fingers crossed for an airsoft version. https://www.fluxdefense.com 1 Quote Link to post Share on other sites
NonEx Posted September 10, 2019 Report Share Posted September 10, 2019 (edited) Just saw that on Facebook. Looks interesting but from the carbine conversion kits out there I still like the Ronin for Glock. I was considering getting one. BUT... I realize that my KWA MP9 GBB SMG is pretty much the same thing so I dunno... Minus putting a pistol inside of it of course, but in terms of form factor, looks, features etc. And we all know the KWA MP9 GBB is a BEAST! Edited September 10, 2019 by NonEx Quote Link to post Share on other sites
Got Wood? Posted September 10, 2019 Report Share Posted September 10, 2019 Personally the Hera Arms kit is my favourite. No idea why it’s not made anymore, the amount of Hera Arms stuff coming out 1 Quote Link to post Share on other sites
aznriptide859 Posted September 11, 2019 Report Share Posted September 11, 2019 5 hours ago, hitmanNo2 said: NonEx, you might like this. Fingers crossed for an airsoft version. https://www.fluxdefense.com BRB I ruined all my underpants. Quote Link to post Share on other sites
HamletV Posted September 11, 2019 Report Share Posted September 11, 2019 (edited) 9 hours ago, hitmanNo2 said: NonEx, you might like this. Fingers crossed for an airsoft version. https://www.fluxdefense.com The stock is too short Hey!, anyone has some knowledge on the double bell glocks?? Edited September 11, 2019 by HamletV Quote Link to post Share on other sites
hitmanNo2 Posted September 11, 2019 Report Share Posted September 11, 2019 16 hours ago, aznriptide859 said: BRB I ruined all my underpants. Slick AF right? I don't buy into all these carbine conversion kits but this thing looks too cool. They do versions for airsoft Glocks so the Sig one might be on the table too. https://www.fluxdefense.com/milsim Quote Link to post Share on other sites
aznriptide859 Posted September 11, 2019 Report Share Posted September 11, 2019 Slick AF right? I don't buy into all these carbine conversion kits but this thing looks too cool. They do versions for airsoft Glocks so the Sig one might be on the table too.https://www.fluxdefense.com/milsimWonder if you could transplant TM intervals into there. Quote Link to post Share on other sites
PureSilver Posted September 12, 2019 Report Share Posted September 12, 2019 (edited) 7 hours ago, aznriptide859 said: Wonder if you could transplant TM intervals into there. Assuming you're talking about the airsoft version hitmanNo2 linked, you don't need to - it'll take Umarex Glocks. If it'll take Umarex Glocks, it can be made to work with TM-pattern ones, although it's specified for Gen.4 guns so you might be better with a WE. 7 hours ago, hitmanNo2 said: They do versions for airsoft Glocks so the Sig one might be on the table too. The VFC (the only licensed P320 AFAIK) staggeringly enough does use a drop-in FCG (which the WE doesn't) so in theory this is possible. I think it's a lot less likely than the already-improbable release of the Glock one, because it's clearly a much more complex mould, but we're living in an improbable era. How many of the airsoft Glock ones they sell versus real ones should be a good indicator of the likelihood of that happening - for all we know the market is just itching to spend $200 (minimum) on accessories for their VFC Glocks. What I don't really understand is why the airsoft one is a brace rather than the SBR version. Despite increasingly horrible offerings from Ares there's no need for airsoft guns to obey SBR laws. Edited September 12, 2019 by PureSilver Quote Link to post Share on other sites
HamletV Posted September 12, 2019 Report Share Posted September 12, 2019 This is the bell glock what I'm talking about http://www.bbgunzerker.com/product/3875/g34-tti-double-bell-768 But i need some opinions of this brand Quote Link to post Share on other sites
aznriptide859 Posted September 12, 2019 Report Share Posted September 12, 2019 40 minutes ago, PureSilver said: Assuming you're talking about the airsoft version hitmanNo2 linked, you don't need to - it'll take Umarex Glocks. If it'll take Umarex Glocks, it can be made to work with TM-pattern ones, although it's specified for Gen.4 guns so you might be better with a WE. Umarex is TM system? Quote Link to post Share on other sites
PureSilver Posted September 12, 2019 Report Share Posted September 12, 2019 3 hours ago, aznriptide859 said: Umarex is TM system? Nah - they're similar but not the same. However, the external dimensions are sufficiently similar that this should be doable. Catgutt already did this with the regular Flux (the airsoft one wasn't even announced when he did his) and a WE (TM-clone) Gen.3 17. He says it required a lot of work, most likely because of using the Gen.3 Glock - which is expressly prohibited by Flux - instead of a Gen.4. Since WE (which are TM-compatible) have since released Gen.4 (and Gen. 5) Glocks, in theory at least the WE and Umarex are sufficiently similar that the Flux should fit fine. Quote Link to post Share on other sites
Got Wood? Posted September 12, 2019 Report Share Posted September 12, 2019 2 Umarex Glock 19x Quote Link to post Share on other sites
HamletV Posted September 13, 2019 Report Share Posted September 13, 2019 Is it possible that no one know nothing of bell's glock ???? Quote Link to post Share on other sites
Got Wood? Posted September 13, 2019 Report Share Posted September 13, 2019 Wrong thread, Hamlet Quote Link to post Share on other sites
HamletV Posted September 14, 2019 Report Share Posted September 14, 2019 On 9/13/2019 at 1:05 AM, Got Wood? said: Wrong thread, Hamlet I don't think so.. Quote Link to post Share on other sites
Got Wood? Posted September 14, 2019 Report Share Posted September 14, 2019 Then you’d be wrong. Quote Link to post Share on other sites
HamletV Posted September 14, 2019 Report Share Posted September 14, 2019 (edited) 3 hours ago, Got Wood? said: Then you’d be wrong. Some other have being asking before about parts and brands, then, why only me i'm wrong?? Or you only want to shows off your g19X, and read "OH!! Your 19X are soo cool!! I'm so jealous!!! 77 Edited September 14, 2019 by HamletV 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.