rizzo Posted June 26, 2005 Report Share Posted June 26, 2005 Hahah "Ah'm gonna catch it!" *Hop Hop Hop SPLASH* "Um... WHO THE F*****EN, WHO THE F****EN etc" Link to post Share on other sites
squarepusher Posted June 26, 2005 Report Share Posted June 26, 2005 Should've gone full-auto on its *albatross*. Link to post Share on other sites
rizzo Posted June 26, 2005 Report Share Posted June 26, 2005 I would say that that wouldn't have been nice, but it probably wouldn't have felt much. Remember that pheasant? :D Link to post Share on other sites
FartSnatcher Posted June 26, 2005 Report Share Posted June 26, 2005 I'm new at this forum so I post some pics of my Custom M16A4! Real KAC M5 RAS, Real Trijcon ACOG TA31F, ELCAN C79 and many other parts to imitate the look of the real USMC M16A4! Sure it's fullmetal Best oRb <{POST_SNAPBACK}> Dude thats the exact same config I have for my M15A4. Is that a G&G or a TM? Link to post Share on other sites
Robot 2000 Posted June 26, 2005 Report Share Posted June 26, 2005 oRb, are there any guns you DON'T have? Link to post Share on other sites
oRb Posted June 27, 2005 Report Share Posted June 27, 2005 Dude thats the exact same config I have for my M15A4. Is that a G&G or a TM? <{POST_SNAPBACK}> LOL. Does it look like a G&G or TM? Please don't compare this with any of the brand above It's build without a base gun Here the specs: G&P Parts: Metal Body A2 with Flattop Upper Receiver, M16 Grip, Gas Tube, Delta Ring Set, Steel Trigger & M16 Stock Guarder Parts: A2 - G.I. Birdcage Flash Hider, Real Front Sight, M16A2 Reinforced Steel Outer Barrel 2003, Aluminium Carry Handle, Receiver Pins, M16 Steel Accessories Set & Real Gun M16 Dust Cover Real Gun Knight’s Armament Co. M5 RAS & Real Gun Handguard Cap Prometheus 6.03 EG Barrel for M16A1 / A2 / VN / AUG (509mm) Systema Parts: Hop-up Rubber, M16A2 Full M140 Progear Gearbox & Long Type Motor Super Torque-Up Powered By Sanyo 10,8V 3300mAh Large Battery (Ni-MH) Tango Down Vertical Grip (Black) + Real Trijicon ACOG 4x32 with Chevron (TA31F) Here a picture of the Metalbody! I had to buy 2 G&P Metalbodies to get a correct M16A4 Receiver! G&P M4A1 Flattop Receiver (UPPER) G&P Burst M16A2 Receiver (LOWER) After spending around 2100Euros the gun still isn't perfect! Next I will put on a Realgun M16A2 Stock and maybe a VLI. Best oRb Link to post Share on other sites
Gene Posted June 27, 2005 Report Share Posted June 27, 2005 devoted to realism! Awesome! Link to post Share on other sites
squarepusher Posted June 27, 2005 Report Share Posted June 27, 2005 Some more pictures, full album @ http://photobucket.com/albums/a348/soundbwoy/ Link to post Share on other sites
doc_newstead Posted June 27, 2005 Report Share Posted June 27, 2005 Stop it. Now. I've made a terrible mess here, and the family are giving me some funny looks. Link to post Share on other sites
squarepusher Posted June 27, 2005 Report Share Posted June 27, 2005 Haha, thanks You should see the last one at 1280x1024 Link to post Share on other sites
LeMongelo Posted June 27, 2005 Report Share Posted June 27, 2005 I had to buy 2 G&P Metalbodies to get a correct M16A4 Receiver! G&P M4A1 Flattop Receiver (UPPER) G&P Burst M16A2 Receiver (LOWER) After spending around 2100Euros the gun still isn't perfect! Next I will put on a Realgun M16A2 Stock and maybe a VLI. Best oRb <{POST_SNAPBACK}> Hi Orb, I think your gun looks great. I hate to tell you this but if your trying to make an A4, the receiver markings are a bit off. A4-RO905 markings with "BURST" rollmarks should be: PROPERTY OF U.S. GOVT. M16A4 CAL. 5.56 MM 188<SERIAL #> The mfg. marks should be: COLT'S MFG CO. INC. HARTFORD CONN. -----USA------ Now if you want an FN Herstal M16... Regardless, minor detail...it looks good. Hope this helps. Link to post Share on other sites
oRb Posted June 27, 2005 Report Share Posted June 27, 2005 Hi Orb, I think your gun looks great. I hate to tell you this but if your trying to make an A4, the receiver markings are a bit off. A4-RO905 markings with "BURST" rollmarks should be: PROPERTY OF U.S. GOVT. M16A4 CAL. 5.56 MM 188<SERIAL #> The mfg. marks should be: COLT'S MFG CO. INC. HARTFORD CONN. -----USA------ Now if you want an FN Herstal M16... Regardless, minor detail...it looks good. Hope this helps. <{POST_SNAPBACK}> I don' t know the actual markings of the M16A4! But I know that the first M16A4 was just a M16A2 with a Flattop Receiver and a KAC M5 RAS! And this one had M16A2 Markings! Best oRb Link to post Share on other sites
LeMongelo Posted June 27, 2005 Report Share Posted June 27, 2005 I don' t know the actual markings of the M16A4! But I know that the first M16A4 was just a M16A2 with a Flattop Receiver and a KAC M5 RAS! And this one had M16A2 Markings! Best oRb <{POST_SNAPBACK}> That's an M4E2, not an A4. Semantics...I'm just busting balls! Clearly, the results show you put a lot of time and effort into it. Who cares what it's called still a nice rifle Link to post Share on other sites
HaVoC Posted July 4, 2005 Report Share Posted July 4, 2005 EOTech 552, eh? *glances at calendar* Only 3 more weeks... Link to post Share on other sites
futbolpunk Posted July 4, 2005 Report Share Posted July 4, 2005 Uh oh, I see 1/2 an inch of RIS open, you better fix that, quick! Link to post Share on other sites
Tef Posted July 4, 2005 Report Share Posted July 4, 2005 is that the actual light, or the replica but it's actually a shower launcher? Link to post Share on other sites
Evil Knevil Posted July 4, 2005 Report Share Posted July 4, 2005 (edited) Ok, so Im not so great with a camera... My CA M15A4C, TM M4 thing, and my Dad's ICS M4A1. Another shot of my M15A4: <{POST_SNAPBACK}> is that handgaurd on the bottom of the M15 a C33 one? cheers Edited July 4, 2005 by Evil Knevil Link to post Share on other sites
phishphansj3151 Posted July 4, 2005 Report Share Posted July 4, 2005 Woah I like the flashhider on the last one man! Link to post Share on other sites
Cali Posted July 4, 2005 Report Share Posted July 4, 2005 (edited) HaVoC - You won't be disappointed. But why 3 more weeks? Saving the money up, I guess? Uh oh, I see 1/2 an inch of RIS open, you better fix that, quick! <{POST_SNAPBACK}> Heh, figured someone would comment on that. I usually don't have the ANPEQ on there, just threw it on for the pic. Tef - Is the Rico Taclight replica with a Surefire filter on the front. The Rico has both the main taclight and the 2 lowlight LED's. Got a great deal on it through some connections. Edited July 4, 2005 by Cali Link to post Share on other sites
Cinder Posted July 4, 2005 Report Share Posted July 4, 2005 (edited) Nope, that's when my source in Iraq gets back from his tour <{POST_SNAPBACK}> So you get alot of your real gear from friends and family as well? ps. My friend is almost done building my AN/PVS-7's >_<!!!1 Edited July 4, 2005 by Cinder Link to post Share on other sites
HaVoC Posted July 4, 2005 Report Share Posted July 4, 2005 Look in the HK thread - there's a pic of him wearing a US Woodland T-shirt Link to post Share on other sites
doc_newstead Posted July 5, 2005 Report Share Posted July 5, 2005 I do like those OD handguards. TMC, did you do anything to stop the bolt release rattling on your gun? I glued my down, but it just came loose again. Link to post Share on other sites
Recommended Posts