heroshark Posted July 16, 2012 Report Share Posted July 16, 2012 Got some better pics. Decided to run it on standard shot shells. I made it to hold a reload in the tube too. Quote Link to post Share on other sites
Imperator Posted July 16, 2012 Report Share Posted July 16, 2012 Got some better pics. Decided to run it on standard shot shells. I made it to hold a reload in the tube too. Can you elaborate on that? How did you change the feeding system from the three tubes into taking the shells? Quote Link to post Share on other sites
heroshark Posted July 16, 2012 Report Share Posted July 16, 2012 Well first took out all the original feed/mag system . Then drilled and filed the feed on the gas block to take a piece of tubing that sits centrally on the face so it engages with the shell. Then the original free tube locking end with a cut down feed tube pushes on the shell to release the bbs . You get 6 shots per shell ,you just have to tip it back on the last 5 rounds to get the full load. Quote Link to post Share on other sites
spaghetti pool Posted July 16, 2012 Report Share Posted July 16, 2012 My Maruzen M1100 Revision. I made a wood foregrip for it, and a wood pistol grip is on the agenda for after I convert it to HPA The shell saddle is the prettiest, but it's the best functioning one I've found as of yet. Quote Link to post Share on other sites
Imperator Posted July 16, 2012 Report Share Posted July 16, 2012 Well first took out all the original feed/mag system . Then drilled and filed the feed on the gas block to take a piece of tubing that sits centrally on the face so it engages with the shell. Then the original free tube locking end with a cut down feed tube pushes on the shell to release the bbs . You get 6 shots per shell ,you just have to tip it back on the last 5 rounds to get the full load. So the pumping action works in the same way, since the bb's are always being push down via the shell, right? Practically, how is it? Since you have to manually replace the shell every 6 shots... Have you field tested it yet? Quote Link to post Share on other sites
heroshark Posted July 16, 2012 Report Share Posted July 16, 2012 It'll be ok for my cqb setup as I run my pistol as a primary .I was gonna make a full length one from 4ish shells patched together ,I may still tbh as there's nothing needed to mod the gun other than pulling out the cut down tube to make way for the longer mag. 1 Quote Link to post Share on other sites
Imperator Posted July 16, 2012 Report Share Posted July 16, 2012 Thanks man! Quote Link to post Share on other sites
FireKnife Posted July 17, 2012 Report Share Posted July 17, 2012 Serbu Super Shorty, done and done. *Before anyone complains, yes, I am aware Tubbs never used a Serbu being 20 years from the future. He used an Ithaca Stakeout. He also never ran a Detonics, and not even Crockett had his in a back holster, preferring ankle, which is stupid. Still, all you need to do now is grow to the height and size of a tree trunk, star in low rate movies and point it at British people when they give you some sass 'FireKnife' Quote Link to post Share on other sites
WhiteHawksan Posted July 21, 2012 Report Share Posted July 21, 2012 All prettied up my M500, and it leaks again *sigh* Quote Link to post Share on other sites
DarkLite Posted July 22, 2012 Report Share Posted July 22, 2012 Liquid gasket sealer. It is your frieeend. Quote Link to post Share on other sites
WhiteHawksan Posted July 22, 2012 Report Share Posted July 22, 2012 The o-ring is mashed to death sadly, I was using Halfrauds thick silicone grease. worked for a while, I may well skirmish that shotgun with a tweed hat and wellies Quote Link to post Share on other sites
heroshark Posted July 23, 2012 Report Share Posted July 23, 2012 (edited) http://www.ebay.co.uk/itm/180pc-Small-Mini-Rubber-Washer-O-Ring-Seal-Set-/251065555143?pt=LH_DefaultDomain_3&hash=item3a74ac58c7 I find the 12x3 good Edited July 23, 2012 by heroshark 1 Quote Link to post Share on other sites
steve ashworth Posted July 23, 2012 Report Share Posted July 23, 2012 Heres my shotgun in the style of a WW2 trench gun Quote Link to post Share on other sites
WhiteHawksan Posted July 23, 2012 Report Share Posted July 23, 2012 excellent stuff there heroshark, you can never have too many o-rings Quote Link to post Share on other sites
heroshark Posted July 28, 2012 Report Share Posted July 28, 2012 (edited) stock or no stock ,which is better?Theres only one way to find out, FIGHT! Edited July 28, 2012 by heroshark 3 Quote Link to post Share on other sites
ollie_ty Posted July 29, 2012 Report Share Posted July 29, 2012 Definitely with stock. Quote Link to post Share on other sites
shmook Posted July 29, 2012 Report Share Posted July 29, 2012 Without, on a single point bungie. For close encounters. 1 Quote Link to post Share on other sites
Horsem4n Posted July 29, 2012 Report Share Posted July 29, 2012 make me one. Quote Link to post Share on other sites
heroshark Posted July 30, 2012 Report Share Posted July 30, 2012 Sure why not all I need is an m500 Quote Link to post Share on other sites
steve ashworth Posted July 30, 2012 Report Share Posted July 30, 2012 With stock deffo Quote Link to post Share on other sites
notrabies Posted August 2, 2012 Report Share Posted August 2, 2012 Another day, another silly shotgun idea: 4 Quote Link to post Share on other sites
Shardik Posted August 2, 2012 Report Share Posted August 2, 2012 Can't I have it? Quote Link to post Share on other sites
notrabies Posted August 2, 2012 Report Share Posted August 2, 2012 Can't I have it? No, but at the very least its a stupidly simple build. I'm just trying to figure out how I can attach a shotgun to the rest of my other guns. I'm also tempted to cut down the M1100 Revision and remove its inner and outer barrels so it'll be a completely insane scattergun with a 2+1 or 1+1 capacity. Quote Link to post Share on other sites
shmook Posted August 2, 2012 Report Share Posted August 2, 2012 5 Quote Link to post Share on other sites
notrabies Posted August 7, 2012 Report Share Posted August 7, 2012 Well I refuse to post pictures since its not mine, but a friend of mine just finished fitting his Maruzen M1100 into a TM SPAS-12 body. Expect pictures, details, and probably videos from him soon. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.