Jump to content
junior

Shotgun Picture Thread

Recommended Posts

I need some help guys....

 

I installed a PDI 6.01 on my CA870. I had to drill the hole in the outer barrel because the outer diameter of the new barrel is slightly larger.

 

Anyway, if I were to install a G&P front kit, what would I have to do to get the inner barrel to fit through the hole in the outer? Is it any bigger? Is it metal? That might cause me some problems....

 

In that case then: no not bigger, tis the same as standard, so you will need to bore it out to a larger diameter, and yes it is metal.

 

Shouldn't be too much trouble though, any half decent hand drill will easily get through the metal used as outer barrel spacers, especially since you are only enlarging an exsisting hole. If you still think that need more drilling stability just find somebody with a pillar drill and you're away.

Share this post


Link to post
Share on other sites

I think the difference in 3shot and 1shot comes from certain word in your shotgun names, MODDAN. Namely "Slugster". That means they replicate the slug-firing pump-action "rifles" and not the shotguns.

 

The M500's that are cloned are the multishot versions, Marushin had plenty of variation in their shotgun lineup that had some wildly different specs.

Share this post


Link to post
Share on other sites

Hi there!

 

You guys, I have a M500, full stock, and I've been trying to find the right sling for it. One that would give it a more classic look.

Any advice??

I'd aprecciate it! :D

 

 

Thanks,

IMPERATOR

Share this post


Link to post
Share on other sites

i use a 2 point on mine. originally from a suit-carrier!

 

i also made a quick single point style one, so i can just drop it and draw my secondary in a hurry :)

Share this post


Link to post
Share on other sites

nice work clot, looks good.

ill be building the same thing once my bits arrive. ill get some pictures of the process.

 

im getting some replacement arms from fire support, hoping that id get them quick, but

thats not realy happening,i think due to royal mail. wgc shop has them in but may not be

any cheaper when shipping customs etc are added.

 

"come get some!", is that a duke reference

Share this post


Link to post
Share on other sites

not in the UK ben, sorry.

 

redwolf is probably your best bet. they do know tanaka's (well, clerence does), and have a decent range. not as good as they used to, but still commendable!

 

they built me a custom one and had it shipped inside 7 days too, so great service :)

 

ps, i dont work for them. neither am i their man-###### :P

Share this post


Link to post
Share on other sites

it was a CL custom. not a tanaka though (see my posts above!).

 

it was an 'off the shelf custom', as in i didnt spec anything, but im sure they will build you one if you ask. clarence used to (may still do) build custom pistols, with varying degrees of customer satisfaction - search for threads about this.

 

they are helpful guys, give them a shout and see what they can do :)

 

ben, you have pm.

Share this post


Link to post
Share on other sites

I have now had 2 shotguns in 2 months not bad going i think but now i have a TM M3 Super 90 far better than its DE clone that died after a week of use.

 

dsc00332d.jpg

 

curlyboy

 

 

 

 

Share this post


Link to post
Share on other sites

Anyone know if the Tacstar fore-end grip;

 

http://www.amazon.com/dp/B002GO258S/ref=as...ASIN=B002GO258S

 

Will fit the ACM M500 SSB 'Cruiser' (shorty) version?

 

Straight fit, or need modding?

 

Want to make a Duke Nukem-esque shotty, as well as having a police-style Tanaka.

 

Ben.

Share this post


Link to post
Share on other sites

Mine is the Marushin, but should be identical

Yup it fits. You have to take off the tension plate to get it to fit.

Also, the tape you see is holding the pins in, the sleeve doesnt slide over the pins like the original foregrip.

I will be threading the holes and putting bolts in shortly.

 

DSCF6128.jpg

Edited by Blood-Clot

Share this post


Link to post
Share on other sites

yup it fits, did last night, as clot says it does not cover the arm pins so something has to

be done, its a little tight on the clone's tube, but gentle persuasion gets it on there. it could

possibly also do with shortening by 5mm, to get more threads on the nut at the front.

 

duke nukem look is the same i was going for when i introduced clot to these grips. damn him

for getting the shotgun before i did.

 

post-40305-1253692153_thumb.jpg

 

ps they can be found in the uk

Share this post


Link to post
Share on other sites

Damn, I really wish I had some good before pics...oh well. When I recieved my SPAS the mag tube was dented pretty badly, the flash hider was missing, and the barrel also had some scratches. Lets just say it wasnt in the best of shape. I took some bondo and filled in all the dents and scratches, sprayed it black again and made a custom flash hider out of a copper pipe fitting. Looks wayyyy better! If you look really closely you can kinda tell the mag tube isnt right. It isnt perfectly round anymore but you cant really tell unless you are less than a foot away. But I dont mind since it looks loads better than it did before.

 

airsoftstuff002-4.jpg

 

airsoftstuff001-4.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.