Jump to content
junior

Shotgun Picture Thread

Recommended Posts

Got some better pics. Decided to run it on standard shot shells. I made it to hold a reload in the tube too.

 

 

 

Can you elaborate on that? How did you change the feeding system from the three tubes into taking the shells?

Share this post


Link to post
Share on other sites

Well first took out all the original feed/mag system . Then drilled and filed the feed on the gas block to take a piece of tubing that sits centrally on the face so it engages with the shell. Then the original free tube locking end with a cut down feed tube pushes on the shell to release the bbs . You get 6 shots per shell ,you just have to tip it back on the last 5 rounds to get the full load.

Share this post


Link to post
Share on other sites

My Maruzen M1100 Revision. I made a wood foregrip for it, and a wood pistol grip is on the agenda for after I convert it to HPA

photo_14.jpg

photo_210.jpg

photo_37.jpg

 

The shell saddle is the prettiest, but it's the best functioning one I've found as of yet.

Share this post


Link to post
Share on other sites

Well first took out all the original feed/mag system . Then drilled and filed the feed on the gas block to take a piece of tubing that sits centrally on the face so it engages with the shell. Then the original free tube locking end with a cut down feed tube pushes on the shell to release the bbs . You get 6 shots per shell ,you just have to tip it back on the last 5 rounds to get the full load.

 

So the pumping action works in the same way, since the bb's are always being push down via the shell, right?

Practically, how is it? Since you have to manually replace the shell every 6 shots... Have you field tested it yet?

Share this post


Link to post
Share on other sites

It'll be ok for my cqb setup as I run my pistol as a primary .I was gonna make a full length one from 4ish shells patched together ,I may still tbh as there's nothing needed to mod the gun other than pulling out the cut down tube to make way for the longer mag.

  • Like 1

Share this post


Link to post
Share on other sites

Serbu Super Shorty, done and done.

 

*Before anyone complains, yes, I am aware Tubbs never used a Serbu being 20 years from the future. He used an Ithaca Stakeout.

 

He also never ran a Detonics, and not even Crockett had his in a back holster, preferring ankle, which is stupid. :P

 

Still, all you need to do now is grow to the height and size of a tree trunk, star in low rate movies and point it at British people when they give you some sass ;)

 

'FireKnife'

Share this post


Link to post
Share on other sites

Can't I have it?

 

No, but at the very least its a stupidly simple build. I'm just trying to figure out how I can attach a shotgun to the rest of my other guns.

I'm also tempted to cut down the M1100 Revision and remove its inner and outer barrels so it'll be a completely insane scattergun with a 2+1 or 1+1 capacity.

Share this post


Link to post
Share on other sites

Well I refuse to post pictures since its not mine, but a friend of mine just finished fitting his Maruzen M1100 into a TM SPAS-12 body. Expect pictures, details, and probably videos from him soon.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.