Wingmann Posted October 25, 2010 Report Share Posted October 25, 2010 LOL i spent ages figuring out who "k4rt' was.... anyways i used a 285mm promy, and its not visible at all. i cant see it looking down the barrel (without a flashlight) Well, I just missed the G0lf part... Won't you have the 14.5" version, right? Mine is 10.5" I can see the default barrel just beyond the flashider limit... Quote Link to post Share on other sites
G0LF K4RT Posted October 26, 2010 Report Share Posted October 26, 2010 nah i ended up going for the 10.5, cheaper and more practical Quote Link to post Share on other sites
G0LF K4RT Posted October 29, 2010 Report Share Posted October 29, 2010 so what brand of m100 spring should i get? im thinking either guarder or prometheus. but how are systema springs? also you can call me golf / kart/ golf kart if leaving out the numbers makes life any easier Quote Link to post Share on other sites
Wingmann Posted October 29, 2010 Report Share Posted October 29, 2010 The only one I can tell you numbers about is Guarder. Their SP90 gives my Sentry exactly 289fps, so it's as close as the claimed energy as it can be. The SP100 should give you 328 or thereabouts (+whatever you get from your TBB). Quote Link to post Share on other sites
G0LF K4RT Posted October 30, 2010 Report Share Posted October 30, 2010 and around how much did the RoF increase by? Quote Link to post Share on other sites
Wingmann Posted October 30, 2010 Report Share Posted October 30, 2010 Hmm, I haven't measured RoF but I posted two videos of my Sentry in this thread (previous page) and there's a short burst in both of them. That's the only comparison I can give you. Quote Link to post Share on other sites
Herby Posted November 5, 2010 Report Share Posted November 5, 2010 Was thinking of getting one of these. Can anybody tell me if the top receivers would mix and match with a G&P SR16shorty??? Link Quote Link to post Share on other sites
hwagan Posted November 5, 2010 Report Share Posted November 5, 2010 Any G&P upper will go on any G&P lower easily. Just make sure it's rear wired. Quote Link to post Share on other sites
G0LF K4RT Posted November 5, 2010 Report Share Posted November 5, 2010 yep, it's like mix n match Quote Link to post Share on other sites
Herby Posted November 5, 2010 Report Share Posted November 5, 2010 Nice one, :Dnow to max my credit card once more. Quote Link to post Share on other sites
Herby Posted November 5, 2010 Report Share Posted November 5, 2010 Sorry for double post but cant see a edit option Does that include the LMT as it looks a bit different to the other m4/m16 receivers?? Quote Link to post Share on other sites
hwagan Posted November 5, 2010 Report Share Posted November 5, 2010 Sorry for double post but cant see a edit option Does that include the LMT as it looks a bit different to the other m4/m16 receivers?? My LMT MRP upper assembly drops straight onto my XM177E1 and Colt M4A1 lowers just as easily as the LMT lower it came with Quote Link to post Share on other sites
Herby Posted November 6, 2010 Report Share Posted November 6, 2010 Cheers for info. ooh so many options now Quote Link to post Share on other sites
Herby Posted November 12, 2010 Report Share Posted November 12, 2010 What tightbore would fit the long version of this?? Quote Link to post Share on other sites
hwagan Posted November 12, 2010 Report Share Posted November 12, 2010 363mm dude Quote Link to post Share on other sites
SuX0rz Posted November 23, 2010 Report Share Posted November 23, 2010 Mine: Quote Link to post Share on other sites
Blackphoenix Posted December 4, 2010 Report Share Posted December 4, 2010 Has anyone here bought the EhobbyAsia verision with the Magpul Parts? I'm really interested in getting this gun and I was wondering if the internals were still stock. If anyone knows that would be greatly appreciated. Quote Link to post Share on other sites
mimesis Posted December 4, 2010 Report Share Posted December 4, 2010 I bought the "long" version (14.5) with Vltor MUR upper receiver and Magpul lower receiver. The internals appear to be absolutely stock G&P. Quote Link to post Share on other sites
harborne blue Posted December 4, 2010 Report Share Posted December 4, 2010 im currently using sandpaper (1000) to gently get rid of the rust every now and then, then applying a thin layer of WD-40 with a cotton bud on the small bits such as pins... idk :S Get yourself a Flambeau rifle case. These are real steel cases with a Kurust treatment added. Use these and your gun won't get rusty. Quote Link to post Share on other sites
hwagan Posted December 9, 2010 Report Share Posted December 9, 2010 Has anyone here bought the EhobbyAsia verision with the Magpul Parts? I'm really interested in getting this gun and I was wondering if the internals were still stock. If anyone knows that would be greatly appreciated. Stock G&P gearbox and internals, with Ehobby's choice of body/front end/magpul bits. Essentially all of them feature the same internals (G&P 8mm V2). Quote Link to post Share on other sites
Herby Posted December 22, 2010 Report Share Posted December 22, 2010 Got one of these beasts recently but find a bit of wobble between the lower and upper receiver. Anybody got an easy fix for this? Quote Link to post Share on other sites
Wingmann Posted December 22, 2010 Report Share Posted December 22, 2010 You could try to add filler in the top back of the lower receiver where the indentations of the upper go. The filler should push the indentations down and fix the wobble. Quote Link to post Share on other sites
Herby Posted December 22, 2010 Report Share Posted December 22, 2010 You could try to add filler in the top back of the lower receiver where the indentations of the upper go. The filler should push the indentations down and fix the wobble. Good idea ill give that a try thanks. Quote Link to post Share on other sites
veratek Posted December 24, 2010 Report Share Posted December 24, 2010 Got one of these beasts recently but find a bit of wobble between the lower and upper receiver. Anybody got an easy fix for this? i had the same problem, a few pages back i think hwagan posted the cure (and it 100% solved all wobble, it even removed the small gap i had between the receivers!). Slip a rubber o-ring onto the upper receiver, where the front pin goes through it. It doesn't take a very big o-ring at all, i used one that was part of my element flashlight. Quote Link to post Share on other sites
bladerunner168 Posted December 24, 2010 Report Share Posted December 24, 2010 This is interesting http://www.wolfarmouries.co.uk/airsoft/bb/product.asp?page=product&id=GPDXE002 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.